Logo "AVAILABLE ISI STUDENT MICROSCOPE FOR NCERT KITS (UPSKL, SSK, SSLK BIOLOGY)"
btmshd
productrange
 
 
Welcome To Our Website  
 

Equipments for Fluid Mechanics Laboratory

1 2 3 [4] 5 6 [«Back ||Next »]
 
CHARLE’S LAW APPARATUS
Click to Enlarge
CHARLE’S LAW APPARATUS (LSE)

With a glass U tube with a bulb & tap at the upper end of one limb, other limb open. From the bottom of the U is an outlet tube which passes through a bung & terminates into a tap. The bulb has a capacity of 7cm³ & the stem beneath is graduated 3x0.1cm³ allowing for expansion over a range of 100ºC. The apparatus can be supported by a single clamp.

See Enlarge



CONSTANT VOLUME AIR THERMOMETER
Click to Enlarge
CONSTANT VOLUME AIR THERMOMETER (LSE)

Consists of a polished teakwood stand approx. 750mm high fitted with a wooden scale reading from 0 to 60cm x 1mm & supporting an adjustable mercury reservoir by a metal rod. A detachable air thermometer bulb about 70mm diameter connected via three-way stopcock to mercury tube with zero index fused inside its upper end. A metal vessel surrounding the bulb supported by detachable metal shelf mounted on insulated asbestos screen. Mounted on a teakwood stand with a deep tray, which serves to catch any mercury spilled accidentally from the reservoir. Supplied complete with 1 meter of rubber pressure tubing 10mm outer diameter & 5mm bore for connecting the reservoir to the bulb.

See Enlarge



IRON FLASK FOR FREEZING
Click to Enlarge
IRON FLASK FOR FREEZING (LSE)

For demonstrating the expansion of water on freezing. A cast iron bottle 100x25mm approx., which can be sealed by means of a well fitting screwed in iron plug.

See Enlarge



REGNAULT’S HYGROMETER SIMPLE
Click to Enlarge
REGNAULT’S HYGROMETER SIMPLE (LSE)

For determining the dew point. Comprises a glass tube 150x25mm with polished silver thimble closed bottom of the tube & the upper end by a rubber bung. The bung has two glass air tubes with right angled bends. One tube ending just below the bung, the other reaching nearly to the bottom of the thimble & a hole for thermometer which reads 10 to 50ºC x 0.5ºC.

See Enlarge



LATENT HEAT OF STEAM APPARATUS
Click to Enlarge
LATENT HEAT OF STEAM APPARATUS (LSE)

Comprises a thick brass calorimeter, a bung with steam inlet & outlet glass tubes, a felt cover, complete with 2 litres tin plate boiler with bung to take the steam tube which connects to the calorimeter.

See Enlarge



COPPER CALORIMETERS
Click to Enlarge
COPPER CALORIMETERS (LSE)

One piece spinning with parallel sides & rolled rim.

See Enlarge



COPPER CALORIMETERS
Click to Enlarge
COPPER CALORIMETERS (LSE)

Polished copper, with fitted with rubber stopper and metal stirrer.

See Enlarge



ALUMINIUM CALORIMETERS
Click to Enlarge
ALUMINIUM CALORIMETERS (LSE)

One piece spinning with parallel sides & rolled rim.

See Enlarge



ALUMINIUM CALORIMETERS
Click to Enlarge
ALUMINIUM CALORIMETERS (LSE)

Polished aluminium, with fitted with rubber stopper and metal stirrer.

See Enlarge



CALORIMETER WITH WOODEN BOX
Click to Enlarge
CALORIMETER WITH WOODEN BOX (LSE)

CALORIMETER WITH WOODEN BOX A complete set comprising the following : 1 copper calorimeter 75x50mm; 1 wooden outer box with felt lining 100x75mm approx.; 1 sliding wooden cover for outer box; 1 copper stirrer with loop to fit inside the copper calorimeter and thermometer holder made of brass, removable.

See Enlarge



CALORIMETER SET COPPER
Click to Enlarge
CALORIMETER SET COPPER (LSE)

Consisting of spun copper cylinder contained within a large 75mm diameter x 100mm aluminium outer vessel with 10mm of insulating material between. Supplied with cover for outer vessel with bung for mounting thermometer support clip.

See Enlarge



JOULE’S CALORIMETER
Click to Enlarge
JOULE’S CALORIMETER (LSE)

For determining the specific heat capacity of liquid by electrical method. Consisting of a nickel plated copper vessel 75x50mm size with outer vessel of teak wood fitted with bakelite top with hole for thermometer. The terminals connected to a coil of wire (for current up to 3 amps.) are fitted, complete with stirrer & outer teakwood vessel.

See Enlarge



METAL BLOCK CALORIMETERS
Click to Enlarge
METAL BLOCK CALORIMETERS (LSE)

Cylindrical metal blocks of mass 1 kg; adjusted to accuracy of ±2%. Each block drilled with two holes. A large central hole 12.5mm diameter for a special immersion heater & a smaller hole, 7.5mm diameter for a thermometer.

See Enlarge



CYLINDERS SET EQUAL IN SIZE
Click to Enlarge
CYLINDERS SET EQUAL IN SIZE (LSE)

CYLINDERS SET EQUAL IN SIZE A set of 6 metal cylinders 40x10mm of copper, brass, iron, zinc, lead, & aluminium packed in cardboard box. Each drilled for suspension.

See Enlarge



STEAM BOILER WITH WATER GAUGE
Click to Enlarge
STEAM BOILER WITH WATER GAUGE (LSE)

A copper vessel having a cylindrical body & a conical top with a short neck for a bung. Fitted with a finger loop handle, steam outlet tube riffled for rubber tubing, & a glass water gauge tube.

See Enlarge




1 2 3 [4] 5 6 [«Back ||Next »]


 
 

Valid XHTML 1.0 Transitional

Valid CSS!

Shadow
 
Home|About Us|Certificates|Enquiry|FAQ's|Contact Us
Copyright © 2010 - International Biological Laboratories. All rights reserved.
 
  Our Associated Websites  
  www.interlabs-India.com | www.interlabs.in | www.interlabs.co.in | www.ambalalab.com | www.interlabs.info | www.interlabs-has.com | www.best-visibility.com | www.vidyatechnoart.com | www.labs-glassware.com | www.v-pyrex.com | www.ncert-kits.com | www.shoppingbags.com www.pharmaceuticalgiftsanatomicalmodels.com  
hits counter