Logo "AVAILABLE ISI STUDENT MICROSCOPE FOR NCERT KITS (UPSKL, SSK, SSLK BIOLOGY)"
btmshd
productrange
 
 
Welcome To Our Website  
 

Laboratory Plasticware

[1] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ Next»]
 
BEAKERS
Click to Enlarge
BEAKERS

Beakers, moulded in Polypropylene, have excellent clarity and very good chemical resistance. These autoclavable beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient becuaseof its tapered spout.

Cap. 50ml, 100ml, 250ml, 500ml, 1000ml, 2000ml


See Enlarge



BURETTE
Click to Enlarge
BURETTE

This burette has a transparent acrylic body and a leakproof stopcock fitted with a self lubricating PTFE plug. Each burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute mineral acids & bases except Hydroflouric Acid & Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used upto 5% wt/wt of acids or 30% bases.

Cap. 25ml, 50ml


See Enlarge



PIPETTE PUMP
Click to Enlarge
PIPETTE PUMP

Fast release pipetting device for precise pipetting & zip quick emptying. The knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has silicon rubber collet inside to hold various pipettes of standard sizes. It resists acids & alkalies and can be easily disassembled for thorough cleaning.

Size : 2ml, 10ml, 25ml


See Enlarge



Dropping Bottles
Click to Enlarge
Dropping Bottles


Material: LDPE
Code Capacity(ml) Packing
620010 60 12
620020 120 12

See Enlarge



REAGENT BOTTLES (NARROW MOUTH)
Click to Enlarge
REAGENT BOTTLES (NARROW MOUTH)

These narrow mouth reagent bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polythylene bottles too have excellent strength and are unbreakable. The polypropylene cap has a built in seal ring to make these bottles leakproof.

Cap. : 60ml, 125ml, 250ml, 500ml, 1000ml


See Enlarge



REAGENT BOTTLES (Wide Mouth)
Click to Enlarge
REAGENT BOTTLES (Wide Mouth)

These wide mouth reagent bottles are available in Polypropylene as well as Polyethylene. The PP bottles as rigid, translucent and have excellent contact clarity. These bottles can be autoclaved.

Cap. : 60ml, 125ml, 250ml, 500ml, 1000ml


See Enlarge



ASPIRATOR BOTTLES
Click to Enlarge
ASPIRATOR BOTTLES

Aspirator Bottles are made of Polypropylrnr and are therefore much lighter than glass. These are autoclavable.

Cap. 5 Lit., 10Lit., 20Lit.


See Enlarge



SYPHON
Click to Enlarge
SYPHON

These self priming Syphons can be used for pouring liquids from large containers to small ones without actually lifting them.

Cap. : 6mm.


See Enlarge



WASH BOTTLES
Click to Enlarge
WASH BOTTLES

Wash Bottles are made of Low Density Polyethylene which gives these bottles a translucent & unbreakable character. Solution can be poured easily by squeezing the bottle lightly.

Cap. : 125ml, 250ml, 500ml, 1000ml


See Enlarge



WASH BOTTLES (New Type)
Click to Enlarge
WASH BOTTLES (New Type)

These bottles are also made of Low Density Polyethylene and are therefore translucent & unbreakable.

Cap. : 250ml, 500ml, 125ml


See Enlarge



CONICAL FLASK
Click to Enlarge
CONICAL FLASK

Made of Polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the flask contamination free and makes the flask leakproof.

Cap. : 100ml , 250ml, 500ml


See Enlarge



FISHER CLAMP
Click to Enlarge
FISHER CLAMP

These clamps are moulded in Polypropylene making it completely corrosion proof. The spring loaded jack in the middle provides a vice like grip to the burette and prevents it from slipping.

Size : Single and Double


See Enlarge



FUNNEL HOLDER
Click to Enlarge
FUNNEL HOLDER

Made of Polypropylene, these corrosion free funnel holders can hold funnels with dia 3" to 6". The extra plate provided can be placed to hold funnels bearing dia 1" to 3" . Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8".

See Enlarge



SEPERATORY FUNNEL HOLDER
Click to Enlarge
SEPERATORY FUNNEL HOLDER

This non-corrosive seperatory funnel holder, moulded in Polypropylene, has a front opening which provides clear view of the solution and allows unobstructed placement of seperating funnel. Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8"

See Enlarge



FLASK STAND
Click to Enlarge
FLASK STAND

Moulded in Polypropylene, this Flask stand gives a stair like top view. Every step provides excellent support to the round bottom flask at every point to contact. This flask stand can hold round bottom flasks up to 10 lit. capacity. This stackable flask stand can also be steam autoclaved.

See Enlarge




[1] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ Next»]


 
 

Valid XHTML 1.0 Transitional

Valid CSS!

Shadow
 
Home|About Us|Certificates|Enquiry|FAQ's|Contact Us
Copyright © 2010 - International Biological Laboratories. All rights reserved.
 
  Our Associated Websites  
  www.interlabs-India.com | www.interlabs.in | www.interlabs.co.in | www.ambalalab.com | www.interlabs.info | www.interlabs-has.com | www.best-visibility.com | www.vidyatechnoart.com | www.labs-glassware.com | www.v-pyrex.com | www.ncert-kits.com | www.shoppingbags.com www.pharmaceuticalgiftsanatomicalmodels.com  
hits counter