Products

Features:
[Dimension 300 X 250 X 400 Mm The Entire System Is Mounted On A Heavy Duty Frame Which Is Embedded With Multi Springs To Absorb The Shock Generated While Reciprocation Is In Action With Reciprocating System Duly Fixed On The Frame And Driven Through Dc Motor With Variable Rpm Level And Duly Indicated Through The Digital Rpm Monitor]
Specifications:

1. Frame Dimension 716 x 283 mm
2. Reciprocating Plate 300 x 285 mm Thickness 6 mm
3. Spring Coupling 230 mm Length Piston Diameter 50 mm

Tribology Lab
Specifications:

1. Bearing Mounting Fixture ? Consist of a set of bearing races for bearings from 6201 to 6204 with parallelogram loading attachment.
   
2. Drive motor ? ? HP, 6000 rpm DC motor
   
3. Lever and spring balance for applying the load, maximum loading capacity 10000N
   
4. Electronic revolution counter with digital indicator.
   
5. Torque arm with dead weights for measurement of friction torque
   
6. Fixture for measuring bearing radial clearance

Features:

• 1200mHeight rugged steel frame.
  
• 10mm size Drill chuck with Allen Keys to suspend the mass ? 3 nos. to be used.
  
• Stop Watch ? Digital Type.
  
• Overall weight approx (25kg)
  
• Weight of the mass given:

This system is a simple Desk top arrangement and the Trainer is provided with Cams of 2 different sizes

Specifications:
Cam A: least Radius 25mm nose radius of 9mm.
Cam B: least Radius 20mm and nose radius 7.5mm A suspending Cushioning Arrangement is given through the spring 1/ 6 HP DC Electric Motor is used to drive the system S.S Plunger & S.S Scale is fitted to measure the reading at the top of the system. Cam Profile Analyser is also available with non contact pic-up and built-in digital RPM Indicator. Model-BSPIL-DYN-04002 (a). FHP Motor drive

Specifications:

1. Load will act vertically upto 1 Kg.
   
2. Deflection 50 cm.
   
3. Length of the beam 500mm
   
4. Horizontal Bar with vertical deflects.

Features:
Determination of gear - Train valve of compound gear trains and Epicyclic gear trains. This system comes in motorized drive with proximity pickup and digital rpm indicator.

• Compound Gear Train Set up is mounted on 500 (L) x 400(W) x 300(H) rugged steel platform with housing.
  
• Epicyclic Gear train setup with housing size is 350(L) x 400(W) x 350(H) frame.
  
• 125 watts, Foot mounted, S4 AC/DC motor coupled with setups.
  
• 0 – 1.0 HP capacity variac to control the motor speed with RPM Indicator (4digit).
  
• 0-10,000 rpm capacity proximity sensor.

• Viscous damping arrangement is provided with 100 sq mm tank.
  
• Equipment is constructed with rugged steel Frame.
  
• Slow and constant speed DC, 12V, Power supply motor to be used for forced vibration.
  
• Dimension: 700(L) x 300 (W) x 600(H).
  
• Resolution of linear Measurement is 1 mm.
  
• Overall weight: 25 kg (approx)

Purpose: Non Contact Pickup

• Proximity Counter panel and variac are housed with 320(L) x 270(W) x 210(H) size metal box to prevent from damage and easily to operate.
  
• 0-10,000 rpm capacity range, 418mm shank dia proximity sensor with 2m, 5m, length cables.
  
• 4 digits, Bright RED LED display.
  
• 230V, AC power supply.
  
• Sensing Capacity: 1 second

Features:
Draw velocity and diagram of basic Four Bar Mechanism using graphical methods including Klein?s construction ? PYROMATIC. The system is made out of Four Bar Chain (i.e.) Crank, Connecting Rod, Slides and sliding chain, to determine velocity and acceleration by graphical method using Klein?s construction.

This system consists of slider crank and crank rocker Mechanism.

• 300(L) x 300(W) x 250(H) rugged steel Platform.
  
• Resolution of Angular Measurement: 1 Deg
  
• Resolution of Linear Measurement: 1mm
  
• Crank length 20 mm, Stroke length: 65 mm

• It is housed with 350(L) x 400(W) x 350(H) rugged frame to prevent from any damage.
  
• Gear train setup is shown on front side to understand the links and movement among the gears.
  
• 125 watts, S4 AC/DC, 6000 rpm constant speed motor directly coupled with the setup.
  
• 0.1-1.0 Hp capacity controllers used to vary the motor speed.
  
• 0 ? 10,000 rpm, proximity type sensor used.

Features:
This system is designed to the see and evaluate the quantum of Wear in a given moving mechanism or part, a motorized piston in bore is subjected to constant reciprocation in the bore where as the piston ring used here is not metallurgically sound material i.e. without any alloying element a pure aluminum hence the ring wear is measured physically by using the constant reciprocation in quantum of reciprocation with that of the Physical wear. The system comes with fractional HP motor and Varian for Speed Adjustments.

Specification

Electrical Panel

• Worn Gear Box unit is mounted on 400(L) x 400(W) x 300 (H) size rugged steel platform
  
• Driver and driven ends have provision to measure the speed when it is running.
  
• 125 watts, foot mounted, S4 AC/DC motor is couple with gearbox unit driver end.
  
• Speed ratio: 1/25 (approx).
  
• 0.1 ? 1.0 Hp Capacity variac.

Features:
This setup has four journals bearing of same size, which are used to rotate the shaft friction free. The system is driven by 1/6h.P ac/dc electric motor, speed can be regulated by 2 amp dimmer stat, speed indication is done digitally, speed with varying load condition can be obtained by considering the frictional coefficient and viscosity of lubricant graphical representation can be performed with speed vs. friction.

Specifications:

1. Journal Dia ? 49.8mm, Length 50mm
   
2. Bearing dia ? 50 mm
   
3. Pressure gauge ? 10 kg/cm2 (Max)
   
4. Weight set to load the bearing upto 25 Kg.
   
5. D.C. motor with variable speed control to drive the journal
   
6. Torque arm and weights for measurement of friction torque
   
7. Oil outlet flow measurement arrangement
   
8. Thermometer to measure oil temperature

Outside Micrometer: Strain ? Chrome Finished Frame, Carbine tipped measuring faces. Flatness of 0.6 mm parallelism of 2mm for models up to 75mm, 3mm for 100mm models.

Inside Micrometer: Wide range of ID measurements with Interchangeable rods. Each rod is marked with its measuring range. Both micrometer head and furnished rods are strain ? chrome finished throughout. Ranges of 25-32mm, 25-50mm, 50-63mm, 50-200mm, 50-300mm, 200-225mm, 200-1000mm.

Specifications:

1. Beams – 25 x 3mm and 25 x 5 mm. Cross section and 1 m span. Beams can be supported between two supports or can be operated as a cantilever.
   
2. Vibration exciter – 1 to 100 cycles sec, with step less vibration of frequency.
   
3. Digital frequency indicator for vibration exciter

Features:
Multi Grade Freedom Suspensions [Complete With Solid Frame With Grouting Arrangement For Simple Pendulum, Bifilar Suspension, Trifler Suspension, With Threads, Chucks, Etc.]
Specifications:

• Bifilar Plate (rectangular) Weight : 1.15 Kg
• Trifilar Plate (circular) Weight : 2.8 Kg
• Triangular wall mounting frame with three jar jug added weight of 1.6 gms

Specifications:

1. 1. DISC-Steel disc. 400mm rotating about vertical axis driven by a 1 HP three phase induction motor, with 3 speed pulleys. Max. Surface speed 0-25 m/sec
   
2. PINS ? 12 mm 150 mm long - Aluminum, brass and C, 1 nos. each.
   
3. Weight set to load the pins ? 100 gm. And 200 gm. 2 nos each
   

Measurements

1. Dial gauge, L.C. 0.01 mm for measurement of pin wear
   
2. Spring balance with torque arm for measurement of co-efficient of friction
   
3. Digital RPM indicator for disc speed

Rope break/electrical break/mechanical break dynamometer are made with mechanical or digital parameters. Dynamometers are driven through 1HP 3 phase and single phase motors.

• The setup consist strong metallic table that is capable to handle the vibration.
• The 3.0 Hp motor is connected with pulley, it is connected with starter and main block in separate switchboard.
• The rectangular wooden shoes are provided to facilitate the Frictional force.
• Water channel is provided in the pulley.
• Brake Drum Radius 15.8cm
• Load added given as steps of 1 kg
• Overall size: 1000(L) x 800(W) x 1500(H)
• Overall weight: 50kg (approx).

Features:
Specifications

1. Crank length : 40 mm
   
2. Slider stroke : 70 mm
   
3. Resolution of measurement : 0.1 mm
   
4. Overall size : 400 x 300mm
   
5. Geared Servo Motor : 30 rpm, 230 volts
   

Scotch Yoke Mechanisim Simple Model (Manual) - BSPIL-DYN-04038A
Specifications:

1. Crank length : 40 mm
   
2. Slider stroke : 70 mm
   
3. Resolution of measurement : 0.1 mm
   
4. Overall size : 400 x 300mm

Features:
Unique strain measuring system is a unique strain gauge experimenter instrument is a demonstration set up for measurement of strain exerted on the material. It comprises of a complete instrument with instrumentation amplifiers, gain amplifiers power supply with a cantilever beam mounted on a base with pan and weight for demonstration and studying and understanding various aspects of strain gauges.

• Panel: 3 ? digit RED LED display Potentiometer to set Zero.
  
• Power Supply: 230V ? 10% at 50 HZ with perfect grounding.
  
• Cantilever Beam: Material: SS
  
• Size: (22 x 2.8 x 0.25) cm.
  
• Max. Load Capacity: 1kg
  
• Strainguage Type: Foil type

Features:

Stroboscope models are handy instruments.They have been designed to keep its functionals aspects and size optimum.The smaller size of the instrument makes easy for the operator to hold and his studies.

stroscope,models have been designed for freeze motion observations in the printing industry for checking the print registrations. It has Xenon flash ube fitted in a 250mm (with 1 no.of flash tube)/500 m (with 2 Nos.of flash tubes)/750mm (with 3 Nos.of flash tubes)long refelector respectively for flashing.The flashing rate is controlled by internal oscillator in "INT"mode.The flashing rate can be varied in this mode by turning control knob (flashes/min)provided on the panel

Purpose: This system will help the Student to study the Fluid Elements such as Pneumatic and Hydraulic.

• 5?, 6?, 7? & 8? sizes of Aluminium made Cylinders (any one size)
  
• 6mm pneumatic hose to be used for transfer the fluid.
  
• Small transparent FRL unit used.
  
• Cut Section view of cylinder and Piston arrangement is shown clearly.

Features:

Purpose: To study Fluid Power and Systems 2 way Direction control value (Solenoid Value) Cut-Sectional View of cylinder is shown. Limit Switch is also fitted to control the flow direction.

Features:
The System is incorporated with five different mechanisms, which includes sliding contact and rolling contact to visualize and to operate manually as well in mechanized manner; all the five mechanisms are fitted in M.S. base of size (500mm x 400mm) approximately with necessary scaling arrangement.

• 400(L) x 350(W) x 300(H) rugged steel platform
  
• 125 watts, S4 AC/ DC, 6000 rpm Motor coupled
  
• 0-6000 rpm variac to control speed.
  
• Overall Weight: 15 kg (Approx)

Features:
The System is incorporated with five different mechanisms, which includes sliding contact and rolling contact to visualize and to operate manually as well in mechanized manner; all the five mechanisms are fitted in M.S. base of size (500mm x 400mm) approximately with necessary scaling arrangement.

• Slider crank Mechanism consists of crank, crankshaft, connecting rod and piston arrangement.
  
• It is constructed to understand easily.
  
• Scotch yoke Mechanism is constructed in separate Platform to study double slider crank mechanism.
  
• Overall size 300(L) x 250(W) x 150(H)
  
• Crank Length: 20mm, Stroke length: 65mm
  
• Weight (Approx): 6 kg

Purpose:

This system is constructed to study the Length/Inching Technique of a Rotating body (i.e) the Motor. The Length can be precisely controlled through tacho generator electronic tachogenerator CDT 8/6 250A /1500/10V 18-30 V/ Aluminium Helical coupling to match with Motor Shaft AHC 25-32 6 x 10 Digital counter (PDC 0612 X) Speed Indicator Duly coupled with 1/8 HP AC/DC motor With 230 volts input.