Products
Categories
Plastic Labware
Coated Magnetic Micro Bars
| It's most excellent to use in small sample stirring of liquid. It can also be used in Cells of Spectrophotometers | |
| Dimensions in mm | Case of |
| 3 x 6 | 12 pcs |
| 3 x 8 | 12 pcs |
Flask Conical
| Graduated with screw cap | |
| Capacity in ml | Case of |
| 100 | 12 pcs |
| 250 | 12 pcs |
| 500 | 6 pcs |
Non Skirted thin wall PCR plates R.M. P.P.
| As the name suggests, these 96 wells plates are Non-skirted, one can easily cut it into two and make it 48 wells, or as desired can be easily cut into 16, 24 or 32, closures for the said plates are available (KC/113 & KC/114) | |
| Places | Case of |
| 96 | 50 pcs |
Slide Box
| Places |
Case of |
| 25 |
12 pcs |
| 50 |
12 pcs |
| 100 | 6 pcs |
.jpg)
1. DESICCATOR (PLAIN)
| Physically Similar to Cat. No. 2063450 But without stop-cock. Moulded, crystal clear, top made of polycarbonate and bottom made out of chemical resistant polypropylene. Grease is required on the flanges to make the desiccator airtight. Supplied with thick perforated polypropylene plate with a big hole at the center for easy lifting and small holes providing air troughs and support to the dishes. Sizes available are |
|||
| Material : Polypropylene / Polycarbanate | |||
| Cat. No. Plain |
Size (mm) |
Flange O.D. (Mm) |
I.D. (mm) |
| 2063420/1 |
150 |
171 | 150 |
| 2063420/2 | 200 |
232 | 199 |
| 2063420/3 | 250 |
276 | 240 |
| 2063420/4 | 300 | 340 | 300 |
.jpg)
2. DESICCATOR (VACUUM)
| Strong, easy to handle, light-weight desiccator with lower container made of polypropylene and upper transparent dome of rigid polycarbonate giving a crystal clear view of the desiccant placed inside. This auoclavable desiccator can hold vacuum up to 740mm of Hg for 24 hours without any greasing. Dome provided with a knurled knob at the top for easy handling and polypropylene stop-cock with self lubricating PTFE plug. This stopcock works three ways for vacuum creation, shutting off and vacuum release. Lower container has internal groove on the flange to take a siliconrubber O-ring. Supplied with thick perforated polypropylene plate with a big hole at the center for easy lifting and small holes providing air troughs and support to the dishes. Also allows use of incandescent crucibles with porcelain desiccator plates. A convenient neatly fitted removable pan holds calcium chloride or other drying agents without any risk of corrosion |
|||
| Material: Polypropylene/ Polycarbonate | |||
| Cat. No. Vaccum |
Size (mm) |
Flange O.D. (Mm) |
I.D. (mm) |
| 2063450/1 |
150 |
171 | 150 |
| 2063450/2 | 200 |
232 | 199 |
| 2063450/3 | 250 |
276 | 240 |
| 2063450/4 | 300 | 340 | 300 |
3. DESICCATOR CABINET
| All plastic, sealed construction, transparent sides and front provides clear inside view. Specially designed to block 99% of ultraviolet light. All cabinets feature a built in hygrometer for indicating inside humidity level and are lockable to ensure secured storage of the desiccants. Sizes (height × width × depth) available are |
|
| Cat. No. |
Size (mm) |
| 2063460/1 |
210 × 340 × 410mm |
| 2063460/2 |
310 × 340 × 410mm |
| 2063460/3 |
410 × 340 × 410mm |
| 2063460/4 | 510 × 340 × 410mm |
8 TEST TUBE STAND (WIRE PATTERN)
| An economical substitute for wire racks, these test tube stands made of polypropylene are submersible, autoclavable and can be stacked when empty. Available in different colours, these stands are made of special blend of polypropylene that makes it sink in water bath and maintain their stability even in agitated water. The racks can easily be disassembled for cleaning purposes. The base is in the form of a grid with square openings and has fold up sides and end bars that lock into rack tops. |
|
| Material: Light Polypropylene | |
| Cat. No. | Particulars |
| 2072520 |
13 mm x 90 tubes |
| 2072520/1 | 16 mm x 60 tubes |
| 2072520/2 | 20 mm x 40 tubes |
| 2072520/3 | 25 mm x 24 tubes |
ANALYTICAL FUNNEL
| Designed specifically for analytical chemistry. Similar to Cat No.2064590, but provided with both internal and external ribs to prevent air blockage. Sizes (diameter) available are |
|||
| Material: Polypropylene | |||
| Cat. No. | Particulars | Insidef | Steam Length |
| 2064620/1 | 50 mm | 50 | 50 |
| 2064620/2 | 62 mm | 62 | 67 |
| 2064620/3 | 75 mm | 75 | 77 |
| 2064620/4 | 100 mm | 100 | 95 |
ANIMAL CAGE
| Available in two different sizes, these Cages provide excellent shelter for different animal species in the laboratory. The metallic top provides proper ventilation and has provisions for feeding the species. |
|
| Material: Polypropylene / Stainless Steel | |
| Cat. No. | Particulars |
| 5050050/1 | 290 x 220 x 140 mm |
| 5050050/2 | 430 x 270 x 150 mm |
ANIMAL CAGE
| Strong resilient cage body is moulded in polypropylene for its superior chemical resistance to urine and other body fluids. The body has rounded corners for easy cleaning and to avoid food entrapment and other contaminations. The extra strong wire lid, securely locked to the body top, is made of stainless steel which ensures no coating to chip off or corrode. The four stoppers at the corners prevent scratching thus allowing space saving storage. These can be repeatedly autoclaved and be used with radioactive material. Sizes available are |
|
| Material: Polypropylene / Stainless Steel | |
| Cat. No. | Particulars |
| 4120400/1 |
290 x 220 x 140 mm |
| 4120400/2 |
430 x 270 x 150 mm |
Aspirator Cans, Big, Polythene
Heavy duty cans made of high density polythene. With carrying handle at
the top, screw cap and side tap for outlet. Available in capacities
the top, screw cap and side tap for outlet. Available in capacities
| Cat. No. | Capacities Ltr. |
| 2060180/1 | 35 L |
| 2060180/2 | 50 L |
ATOMIC MODEL SET
| Useful for construction of 3-dimenional molecular structures of various organic and inorganic compounds and demonstrating their geometries. The set consists of moulded balls of different colours and sizes along with connecting lugs of different sizes. The balls have holes to facilitate the fixing of lugs. Complete components moulded in polystyrene. The set comes nicely packed in a compartmented plastic box. |
|
| Material Polypropylene | |
| Cat. No. | Particulars |
| 2100200/1 | Senior Set |
| 2100200/2 | Junior Set |
ATOMIC MODEL SET
| Useful for construction of 3-dimenional molecular structures of various organic and inorganic compounds and demonstrating their geometries. The set consists of moulded balls of different colours and sizes along with connecting lugs of different sizes. The balls have holes to facilitate the fixing of lugs. Complete components moulded in polystyrene. The set comes nicely packed in a compartmented plastic box. |
|
| Cat. No | |
| 2100200/1 | Senior Set: The set consists of 185 connecting lugs and 375 balls of prescribed colours and sizes. Each compartment of the moulded plastic box has separate space for every particular colour and size of ball. |
| 2100200/2 | junior Set: The set consists of 37 connecting lugs and 75 balls of prescribed colours and sizes. |
ATOMIC MODEL SET (EURO DESIGN)
| This set consists of moulded balls of different colours & sizes along with connectors of different sizes. The sizes & shapes of the balls & connecting lugs have been designed in accordance with internationally acceptable standards. | |
| Material: Polystyrene | |
| Cat. No. | Particulars |
| 5030100/1 | Student Set |
| 5030100/2 | Teacher Set |
Beakers
Moulded in polypropylene, these superior quality beakers feature
excellent clarity and very good chemical resistance. Autoclavable, with
permanent graduations. Tapered spout facilitates easy pouring out.
Available in capacities (mL)
excellent clarity and very good chemical resistance. Autoclavable, with
permanent graduations. Tapered spout facilitates easy pouring out.
Available in capacities (mL)
| Cat. No. | Particulars | Least Count |
| 2060510/2 | 50 mL | 5 |
| 2060510/3 | 100 mL | 5 |
| 2060510/4 | 250 mL | 10 |
| 2060510/5 | 500 mL | 10 |
| 2060510/6 | 1000 mL | 25 |
| 2060510/7 | 2000 mL | 250 |
.jpg)
BEAKERS (EURO DESIGN)
| Cat. No. | Particulars | Least Count |
| 5010800/1 | 25 mL | 5 |
| 5010800/2 | 50 mL | 5 |
| 5010800/3 | 100 mL | 5 |
| 5010800/4 | 250 mL | 10 |
| 5010800/5 | 500 mL | 10 |
| 5010800/6 | 1000 mL | 20 |
| 5010800/7 | 2000 mL | 50 |
| 5010800/8 | 5000 mL | 200 |
| 5010850/1 | 50 mL | 5 |
| 5010850/2 | 100 mL | 5 |
| 5010850/3 | 250 mL | 10 |
| 5010850/4 | 500 mL | 10 |
| 5010850/5 | 1000 mL | 20 |
Beakers R.M. PTFE
| Capacity in ml | Case of |
| 25 | 1 pcs |
| 50 | 1 pcs |
| 100 | 1 pcs |
| 250 | 1 pcs |
| 400 | 1 pcs |
| 500 | 1 pcs |
| 1000 | 1 pcs |
| 2000 | 1 pcs |
BELL JAR, STOPPERED, PLASTIC
Made of clear transparent plastic. Size 20×10cm with stopper, transparent.
| Cat. No. | Size cm |
| 2060690 | 20×10cm |
Bottle Heavy Duty Vacuum
This autoclavable bottle, made of polypropylene, has thick walls, is rugged
& can be used for repeated applications of vaccum
& can be used for repeated applications of vaccum
| Cat. No. | Particulars |
| 5010550 | 2000 mL |
Bottle Narrow Mouth
This autoclavable bottle, made of polypropylene, can be used for storing &
transferring chemicals and other reagents safe & sound
transferring chemicals and other reagents safe & sound
| Cat. No. | Particulars |
| 5010450 | 4000 mL |
.jpg)
Bottle Reagent (Narrow Mouth)
High density PP. Bottles are rigid, translucent and have excellent contact
clarity, can be autoclaved filled as well as empty. Screw cap has a built in
seal ring to make the bottles leakproof.
clarity, can be autoclaved filled as well as empty. Screw cap has a built in
seal ring to make the bottles leakproof.
| Cat. No. PP | Cat. No. LDPE | Particulars |
| 2061020/1 | 5010300/1 | 60 mL |
| 2061020/2 | 5010300/2 | 125 mL |
| 2061020/3 | 5010300/3 | 250 mL |
| 2061020/4 | 5010300/4 | 500 mL |
| 2061020/5 | 5010300/5 | 1000 mL |
Bottle Wide Mouth Square
This autoclavable bottle, made of polypropylene, can be used for storing & shipping chemicals & reagents. Being wide mouthed, it is always convenient to pour in & take out die reagents. The built in depressions on two sides provide excellent grip while holding this bottle.
| Cat. No. | Particulars |
| 5010500 | 4000 mL |
BOTTLE, WASH (NEW TYPE)
| Resilient, translucent and unbreakable wide mouth bottle of low density Polyethylene, single piece blowing. These bottles have built-in delivery tube blown outside the bottle, ensuring no contamination of impurities from the bench while filling. Entire contents can be dispensed without tipping or shaking, stream of liquid jet controlled by the amount of pressure. Graduated on the outside to give an approximation of volume of liquid to be filled or dispensed. Comes with leak proof screw-cap with innerplug. Acid and alkali proof. Available in capacities (mL) |
|
| Material : Low Density Polyethylene | |
| Cat. No. | Particulars |
| 2061320/1 |
125 mL |
| 2061320/2 |
250 mL |
| 2061320/3 | 500 mL |
BOTTLES ,WASH, WIDE MOUTH
| Wide mouth bottles of low density polyethylene enabling easy filling and cleaning. Features a top closing leak-proof screw type cap with dispensing stem moulded in one piece. Available in 500mL capacity. | |
| Material : Polyethylene | |
| Cat. No. | Particulars |
| 2061290 | 500 mL |
Bottles Aspirator
Light weight and easy to handle. These bottles are moulded in Polypropylene, which is autoclavable, dependable and have good impact strength providing extra durability to the bottle. The leak-proof spigot is screwed to the bottle body and requires only a half turn to open or close providing quick and convenient dispensing. It is acid and alkali resistant and can be used for storing and dispensing solutions, media and distilled water. Can be autoclaved, when empty, to prevent recurring bacterial growth. Available in capacities (L)
| Cat. No. | Particulars |
| 2060210/1 | 5 Ltrs. |
| 2060210/2 | 10 Ltrs. |
| 2060210/3 | 20 Ltrs. |
Bottles Dropping
Narrow Mouth Polyethylene Bottles for dispensing small uniform drops of
the liquid contained, when squeezed gently. Available in capacities (mL)
the liquid contained, when squeezed gently. Available in capacities (mL)
| Cat. No. | Particulars |
| 2060840/1 | 60 mL |
| 2060840/2 125 | mL |
BOTTLES, WASH
| Resilient, narrow mouth bottle of low density Polyethylene, acid and alkali proof. These Bottles are easy to squeeze and have screw cap with bent delivery tube. Liquid is expelled out through the flexible delivery tube by squeezing the bottle and can be directed wherever required. Available in capacities (mL) | |
| Material : Polypropylene | |
| Cat. No. | Particulars |
| 2061260/1 |
125 mL |
| 2061260/2 |
250 mL |
| 2061260/3 |
500 mL |
| 2061260/4 | 1000 mL |
BUCHNER FUNNEL
| These two-piece funnels are light-weight, easy to clean and autoclavable. The upper portion can be snap-fitted with the lower one forming a vacuum seal that does not require greasing. Base of upper portion has a perforated plate. Sizes (diameter) available are |
|
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 2064830/1 | 70 mm |
| 2064830/2 | 110 mm |
BURETTE
| Transparent acrylic body with a leak-proof stop-cock having self lubricating PTFE plug. Each burette inspanidually calibrated for maximum accuracy. Material PMMA / TPX. Available in capacities |
|
| Material : Polypropylene | |
| Cat. No. | Particulars |
| 2061980/1 |
25 mL |
| 2061980/2 |
50 mL |
| 2061980/3 | 100 mL |
BURETTE CLAMP, FISHER TYPE
| Non-corrosive, unbreakable clamps, moulded in polypropylene, grip the burette firmly without obstructing graduations. The spring loaded jack in the middle, with concealed spring, provides vice-like grip to the burette and prevents it from slipping. Central holder provided with tapered wedges to ensure a firm grip on the rods up to 12.5mm diameter. Suitable for use with Retort Stand, Polypropylene, |
|
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 2070840/1 | Fisher Clamp-Single |
| 2070840/2 | Fisher Clamp-Double |
BYTAC? BENCH PROTECTOR
| Bytac is a laminate consisting of FEP film that is bonded to vinyl backing. Bytac Provides an easy and economical way to protect bench tops, fumehood surfaces With a non-stick chemical resistant fluropolymer film. It creates a non absorbent, Contamination free surface that can be washed with chlorine bleach for clinical and Biological labs. Corrosive chemicals or sticky substance are easily removed by Wiping with a damp sponge. | |
| Material:FEP / VINYL | |
| Cat. No. | (W ? L) cm. |
| 5060050/1 | 32 ? 460 |
| 5060050/2 | 63.5 ? 460 |
Carboy
Carboys, made of polypropylene, are much lighter than glass. These
autoclavable, dependable & durable Carboys are provided with wide
handles making it convenient while carrying or pouring purposes.
autoclavable, dependable & durable Carboys are provided with wide
handles making it convenient while carrying or pouring purposes.
| Cat. No. | Particulars |
| 5010600/1 | 10 Ltrs. |
| 5010600/2 | 20 Ltrs. |
Carboy With Stop Cock
Adding in line of Aspirators, These polypropylene Carboys are autoclavable, dependable & durable. These are also equipped with a leak proof spigot screwed to the body. These carboys are an excellent replacement for glass carboys and are used for storing & dispensing distilled water & other laboratory solutions.
| Cat. No. | Particulars |
| 5010650/1 | 10 Ltrs. |
| 5010650/2 | 20 Ltrs. |
Carboys R.M HDPE
| Carboys have strong side handles for easy and safe carrying and pouring of chemicals, distilled water and other solutions. It comes with teak-proof cap which has self-sealing. | |
| Capacity in ml/ltr. | Case of |
| 250 ml | 12 pcs |
| 500 ml | 12 pcs |
| 1000 ml | 6 pcs |
| 2000 ml | 6 pcs |
| 5000 ml | 1 pcs |
| 10 ml | 1 pcs |
| 20 ml | 1 pcs |
| 30 ml | 1 pcs |
CARRIER TRAY
| This autoclavable Polypropylene Tray has a unique feature i.e. its handle which proves really helpful in carrying reagents or laboratory apparatus from one place to another, single handedly. |
|
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 5014200 | 380 x 240 x 115 mm |
CELL SCRAPER
| This cell scraper, as the name suggests, provides an excellent option for cell scraping purposes in microbiology. | |
| Cat. No. | Particulars |
| 4012320/1 |
240 mm |
| 4012320/2 | 300 mm |
Centrifugal Tube Conical Bottom R.M P.P.
| With screw cap & printed Graduation | |
| Capacity in ml | Case of |
| 15 | 100 pcs |
| 50 | 100 pcs |
CENTRIFUGE MICRO, WITH CIRCULAR ROTOR
| High performance centrifuge is equipped with vibration free motor offering long life and reliability. Square shaped small foot print allows it be located easily on work benches. It incorporates built in power supply, digital display of time and RPM, and soft, membrane type touch key panel allowing adjustment of both RPM and time. Supplied with standard 6 place rotor for 1.5ml tubes. Spare 12 place rotor for 0.5ml tubes available optionally. RPM adjustable from 1000 to 10000 in steps of 1000. | ||
| Cat. No. | 2050920 | |
CENTRIFUGE TUBE CONICAL BOTTOM
| Moulded in polypropylene, these tubes are clear, strong and safe and are autoclavable. With printed graduations on the outer surface. The built in seal ring in the screw caps makes the tubes absolutely leak-proof. Available sterilized as well as non-sterilized | |
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 2051080/1 |
15 mL |
| 2051080/2 | 50 mL |
| 2051080/3 | 15 mL- Sterile |
| 2051080/4 | 50 mL- Sterile |
CENTRIFUGE TUBE ROUND BOTTOM
| Moulded in polypropylene, these tubes with round bottom offer excellent clarity and durability. Can be autoclaved. Provided with leak-proof, plug-in type cap. Available in capacities | |
| Material: Polypropylene / Polycarbonate | |
| Cat. No. | Particulars |
| 2051120/1 |
16 mL Cent Tube PP |
| 2051120/2 |
50 mL Cent Tube PP |
| 2051120/3 |
Cap for 16 mL Cent Tube |
| 2051120/4 |
Cap for 50 mL Cent Tube |
| 2051120/5 |
16 mL Cent Tube PC |
| 2051120/6 | 50 mL Cent Tube PC |
CENTRIFUGE TUBE, MICRO
| Moulded in polypropylene, these micro tubes are attached with plugs which snap fit to make it leak-proof. Capable of withstanding forces of an ultra centrifuge and can be used for transmitting samples for microanalysis. Can be steam autoclaved. |
|
| Cat. No. | Capacity mL |
| 2051140/1 |
0.5mL |
| 2051140/2 |
1.5mL |
| 2051140/3 |
1.5mL (Coloured) |
| 2051140/4 | 2.0mL |
CENTRIFUGE TUBES, OAK RIDGE
| Oak Ridge Centrifuge Tubes, made of Polypropylene, have excellent contact clarity and can be used upto 50,000xG. The screw cap is fitted with silicon O-Ring making it totally leakproof. These tubes should not be used below 4°C. | |
| Material : Polypropylene | |
| Cat. No. | Particulars |
| 5011350/1 | 30 mL |
| 5011350/2 | 50 mL |
| 5011350/3 | 100mL |
| Actual brim capacity of 5011350/2 is 45 mL | |
Cones R.M. PTFE
| Stuffing Box | |
| Bore Dimensions in mm | Case of |
| B-14 | 1 pcs |
| B-19 | 1 pcs |
| B-24 | 1 pcs |
| B-29 | 1 pcs |
| B-34 | 1 pcs |
| B-45 | 1 pcs |
| B-50 | 1 pcs |
| B-55 | 1 pcs |
CONICAL FLASK
| Break resistant, autoclavable transparent polycarbonate flask have excellent mechanical strength. | |
| Material : PC autoclavable | |
| Cat. No. | Capacities mL |
| 5060650 | 250 m L |
CONICAL FLASK WITH SCREW CAP
| Same as above flask with added advantage of polypropylene screw cap. Used for preparation and storage of culture media. | |
| Material : PC autoclavable | |
| Cat. No. | Capacities mL |
| 5060700 | 250 m L |
CONICAL MEASURES
| Useful for rapid measurement in small quantities. Moulded in polypropylene, these autoclavable measures have hexagonal base for excellent stability. Have good chemical resistance and raised graduation for easy reading. Available in capacities (mL) | ||
| Material: Polypropylene | ||
| Cat. No. | Particulars | Least Count |
| 2065550/1 |
12 mL | 1 mL |
| 2065550/2 |
25 mL | 1 mL |
| 2065550/3 |
50 mL | 2 mL |
| 2065550/4 |
125 mL | 5 mL |
| 2065550/5 | 200 mL | 5 mL |
.jpg)
CONNECTORS (CROSS)
| These four way connectors prove to be an excellent option for achieving leakproof joints in tubing connections. | |
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 5011550/1 |
Cross Connectors-6mm |
| 5011550/2 |
Cross Connectors-8mm |
| 5011550/3 | Cross Connectors-10mm |
.jpg)
CONNECTORS (L SHAPED)
| These L shaped connectors also add to the range of different connectors committed to provide excellent leakproof tube arrangements. | |
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 5011600/1 |
L Connectors-6mm |
| 5011600/2 |
L Connectors-8mm |
| 5011600/3 | L Connectors-10mm |
.jpg)
CONNECTORS (T & Y)
| Three way T-shaped connectors, riffled end for rubber tubing, 8mm outside diameter | |
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 2068130/1 |
T-Connectors 8mm |
| 2068160/1 |
Y-Connectors 8mm |
| 2068130/2 |
T-Connectors 6mm |
| 2068160/2 | Y-Connectors 6mm |
