Products
Categories
Dynamics
Universal Governor
Specifications:
This system is incorporated with all types of governors such as WATT, PROEL, HARTNELL and PORTER. It is mounted on a Common frame with DC motor, Speed controller, Digital RPM meter, Links, Fly weights, springs, dead weights, etc. to make it universal and comprehensive. 1/16 HP DC electric motor is used for the drive. Upper Arm length is 200mm approximately Lower Arm length is 120mm approximately. Central Load is 1 Kg. Speed is controlled through Electronic regulator. Universal Governor is also available with non contact pick-up and built-in digital RPM Indicator. Model-BSPIL-DYN-04004 (a).
Universal Joints
Universal Speed Setup Consisting of Photo Voltic Pickup
Features:
Consisting Of Photo Voltaic Pickup, Contact, Non Contact Pickup, Magnetic Pickup Stroboscope 0- 20000 Rpm Digital Pickup With Flash Gun & Motorized Fan Arrangement
Universal Vibration Apparatus
Features:
A mechanical oscillation recorder and digital indicator for indicating forcing frequency A stop clock to measure the time period A technical manual accompanying the equipment An attractive and rustproof powder coating for long life.
The unit should be supplied with following experimental setup
Module I
llations of simple pendulum
Oscillations of compound pendulum
Radius of gyration of bi-filar suspension
Radius of gyration of tri-filar suspension
Module II
Undamped torsional vibrations of single rotor system
Damped torsional vibrations of single rotor system
Undamped torsional vibration of double rotor system
Module III
Free vibrations of helical coiled spring
Free vibrations of spring mass system
forced damped vibrations of a spring mass system
Lateral vibrations of simply supported beam
Verification of Dunkerley?s rule.
Velocity Measuring Apparatus
Specifications:
- Blower : 1- 2 HP Capacity
- Starter : 3 Phase starter for motor
- Duct : Made up of M.S. sheet, 100 ? 200 mm * 100 ? 200 * 100 ? 200 length
- Stand : M.S. Frame
- Anemometer with probe : Hand held (digital) battery operated, van type
- Range : 0-50 m/sec Butterfly valve to vary the air velocity
- Power supply : 240 volts AC, 50Hz
Vibration indicator and sensor 1mm Displacement
Specifications:
- This setup consists of shaker, vibration meter and sensor.
- Shaker: Force rating: 5 Newton, Frequency ranges 50Hz to 1 kHz static load on shaker spindle 100 grams.
- Control Unit: Frequency range: 50Hz to 1000Hz, output voltage 0 ? 10V
- Vibration meter: Display: 3.5 digit LCD, Source capacitance 30,000Pf
Measurement Range:
- Acceleration: 0.1 ? 199.9m/s2
- Velocity: 0.01 ? 19.99 cm/s
- Displacement: 0.03 ? 1.99mm
- Accuracy: A: ?5%, V: ?5%, D: ?5%
- Selector for different modes such as accelerator, velocity and displacement.
- Power supply 230V, AC 50 Hz mains socket with toggle switch.
Vibration Measurement
Vibration Table With Recorder
Whirling of Shaft
Whirling of Shaft with 3 shafts, 2 set of different bearing ends, Safety guard, speed controller, flexible shaft etc. Duly mounted on the solid frame with FHP Motor drive
Specifications:
Test shafts ? 4.75mm, 6.35 mm, 2 each.
Bearing to provide and conditions. a. Both ends fixed b. One end fixed and one end free
Drive Motor ? 1/8 HP, 1500 rpm with speed control arrangement
Rotor for each shaft, of suitable size.
