Products

GLASS, WITH ONE BULB AND TUBE FOR BENDING, LENGTH EXCLUDES NARROW TUBE.

GLASS WITH SIDE ARMS AND INTERCHANGEABLE STOPPER.

GLASS, IN U SHAPED.

PLAIN ENDS, WITHOUT SIDE ARMS

GLASS, IN U SHAPED.

PLAIN ENDS, WITH SIDE ARMS

MADE OF PP,AUTOCLAVABLE.
ALSO AVAILABLE SPARE STOP COCK.

GLASS CONSTRUCTION

GLASS CONSTRUCTION

GLASS CONSTRUCTION

DOUBLE CHAMBER,FLY SCREW, CROSS PIN,FLANGE AND DIE PRESSED LID ARE FULLY STAINLESS STEEL. LID IS FITTED WITH PRESSURE GUAGE,SAFETY VALVE ,EXTRA SAFETY VALVE , FUSIBLE PLUG,MANUAL EXHAUST VALVE AND VACCUM BREAKER,DRAIN VALVE AT BOTTOM,MOLDED NEOPRENE GASKET.SPECIALLY DESIGNED ENERGY EFFICIENT HEATERS .
POWER SUPPLY 240V AC 50HZ SINGLE PHASE.

INSTANT OPERATION,TOUGH,VERSATILE,BRIGHT LARGE LED READ-OUTS, MEMORY RECALL,MICROPROCESSOR BASED SELF DIAGNOSTICS,DUAL RANGE

MOULDED IN TOUGH ABS PLASTIC ,WITH READING SCALE ON BOTH FACES.

CAPACITY: 1 KG 3 KG 6KG
GRADUATION : 25GM 50GM 100GM.

MOULDED IN UNBREAKABLE NYLON,WITH OVERLOAD PROTECTION AND AN INBUILT TARE SCREW FOR ZERO ADJUSTMENT,FITTED WITH HOOKS AT BOTH ENDS.

CAPACITY: .....1 KG 2KG 5 KG 10KG 15KG 20KG
GRADUATION: 5GM 10GM 25GM 50GM 100GM 100GM.

HIGH SENSITIVE,BRASS BEAM IS GRADUATED INTO 100 DIVISION WITH ZERO AT CENTRE PROVIDED WITH GROUND AGATE BEARING AND KNIFE EDGES WITH SS PAN FITTED ON WOODEN POLISHED CASE WITH TWO SIDE DOORS AND COUNTER POISED FRONT SLIDE.

CAPACITY : 200 GM ,SENSITIVITY - 1MG .

FOR USE IN COLLEGES & LABORATORIES,BEAM OF BRASS,THE UPPER EDGE DIVIDED INTO 50 SCALE DIVISION TO EACH SIDE ,EACH SCALE DIVISION REPRESENTING 0.2 MG, RIDER ON THE SCALE.ALL PARTS OF BRASS WITH S.S.PANS,FITTED ON WOODEN POLISHED CASE WITH FRONT SLIDER AND TWO SIDE DOORS

CAPACITY : 200GM , SENSITIVITY- 0.2 MG .

A HIGH FORM BALANCE WITH TWO BEAMS ONE DIAL AND ONE VERNIER SCALE
BEAMS :- 0-200 GM X 100 GM
.............0-100 GM X 10GM

DIAL : 0-10 GM

VERNIER SCALE READS TO 0.01GM.

TWO PAN BALANCE FOR ACCURATE & RAPID WEIGHING UPTO 2 KG WHEN USED WITH SUPPLEMENTARY MASSES.IT HAS CENTRE INDICATING SLIDING MASSES TO WEIGH UPTO 210GM, SPRING LOADED ZERO ADJUST COMPENSATOR & MAGNETIC

DAMPING S.S.PAN OF 150MM.
BEAMS- ...........................0 TO 200G X 10G , 0 TO 10G X 0.1
SUPPLEMENTARY MASSES - 1KG , 500G ,200G AND 100G
SUPPORT ROD FOR UNDER WEIGHING FACILITY.

SENSITIVE PRECISION BALANCE,BRASS BEAM PROVIDE WITH SELECT GROUND AGATE KNIFE EDGES & DETACHABLE S.S. PAN OF 75MM,FITTED ON WOODEN POLISHED CASE WITH DIVIDED DOORS.

CAPACITY : 250GM , SENSITIVITY- 1 MG

IT'S A SUBSTITUTION OF WEIGHTS.IT HAS 10 VERNIER SCALE DIVISION 9 MAIN SCALE DIVISION,1 MAIN SCALE DIVISION =100 SCREW GAUGE DIVISION,GRADUATED FROM 0 TO 110TH DIVISION,SIMPLE AIR DAMPING KNIFE EDGES MADE OF ARTIFICAL JEWELS,BUILT IN WEIGHT OF NON-MAGNETIC ALLOY,WEIGHING CHAMBER .

SIZE : W-225MM X D-175MM X H-240MM.
AVAILABLE CAPACITY: 200GM ......160GM ......100GM ......10GM
WITH ACCURACY OF 0.005 MG / 0.01 MG / 0.1 MG.

BUILT IN STEP DOWN TRANSFORMER FOR 220V AC INPUT.

GLASED EXCEPT OUTSIDE BASE WITH SPOUT

ALSO AVAILABLE FOR DIFFERENT CAPACITIES

HISTO BATH WITH HIGH CAPACITY,USED FOR STRETCHING AND FLATTENING. PARAFFIN TISSUE SAMPLES AFTER SECTIONING,ALSO TO MAINTAIN SPECIMENS AND SOLUTIONS AT A REQUIRED TEMPERATURE FOR IMMUNOHISTO CHEMICAL AND ENZYME CHEMICAL APPLICATION. WITH LED DISPLAY , TEMPERATURE CONTROL WITH PULSE WIDTH MODULATING FOR ACCURATE AND PRECISE CONTROL,OVEN HEATING PROTECTION,BATTERY BACK UP FOR MEMORY STORAGE.

STORAGE TYPE , FOR STEDY DISCHARGE OF CURRENTS , IN POLYSTRENE CONTAINER WITH MARKED POSITIVE TERMINALS AND CHARGING INSTRUCTIONS. SUPPLIED INCHARGED AND WITHOUT ACID.