Products

Parallelepiped, each rectangular side of 100mm lenght and 60mm width. Rods of diameter 5mm height 55mm made of plastic. Arrow marked to show vectors a,b,c As per sample

Angle between two planes

Plastic sheet of size 200x70/75x base height 15mm, one plastic sheet joined with hinge on top side size 100mmx 75mmx sheet thickness 5mm. Fix one half protractor on one side of base as per sample. And two steel rods, onefixed at right angle to the base and another to the plastic sheet joined. And one half protractor fixed on steel rod perpendicular to the base as per sample. Packed in plastic box. As per sample

Arithmetic mean and geometric mean

One red square piece of plastic sheet of size 60x60x2mm and 4 rectangular pieces of size 90x30x2mm each in Yellow,orange,blue& green colour made of transparent plastic. As per sample

Complex numbers

Plastic sheet of size 200 x200x3.4mm. Graph printed on white plastic with 2 different coloured arrows having 2mm dia and lenght 80mm, steel wire bended in L shape. As per sample.

Conic section

Four different part constituting a cone of base dia. 60mm and total height of 75 mm in 2 different colours showing sectional cutting of circle, ellipse and parabola made of plastic showing their borders clearly. One hole of 2mm dia. running from top to bottom of both the cones. one 2mm dia. steel rod of length 160mm. As per sample

Demonstration board of ellipse

Size 235 X 235 X 16 mm board. One side permanent graph printing in black colour on ceramic white steel sheet and other side covered with laminated sheet. All four sides covered with round aluminum Chapter and four corners fitted by first quality ABS corner. 2 screws fixed on the top of the graph with long life thread tied for experiment. As per sample

Distance between two skew lines

Four plastic pipe pieces of dia 30/32, lenght 50mm, internaldia 24mm. Three holes of 2mm dia on each pipe, distance between successive holes 12mm. Two steel rods of dia 2mm, lenght 200 mm and one steel rod of dia 2mm lenght 50mm. As per sample

Graph of (y=ex andy=logex)

Plastic sheet ofsize 200x 200 x 3 / 3.5mm , working graph with 6 holes for the slope at the back side of removing the graphical curve. As per sample

Increasing and decreasing, maxima and minima.

Plastic sheet of size 225x200x3.5/4mm,2 movable arrows working on paticular path of graph made of plastic as per sample and packed in plastic box. As per sample

Integral

Paper graph in three different colours blue, yellow and pink but curve shapes should be same for all three sets. As per sample

Intersection of two planes

Plastic white sheet of size 200x200x3.5/4mm with a V shape- slot of 1.8/2 mm depth with 2 square plates coloured blue and yellow of size 100x100x1.5/2 mm made of plastic. As per sample

Inverse trignometric function (sin xand sin- 1x)

Plastic sheet board of size 200 x 200x 3.6 mm, working graph , 4 holes at the back side of 2mm dia. for removing the graphical curve. As per sample.

Inverse trignometric function (tan-1)

Plastic transparent sheet of size 200x200x0.3mm. Graph printed As per sample.

Inverse trigonometric function (cos-1)

Plastic transparent sheet of size 200x200x0.3mm. Graph printed . As per sample

Inverse trigonometric function (sin-1)

Plastic transparent sheet of size 200x200x0.3mm. Graph printed . As per sample

Kit box

Container along with a lid and wheels at the base, attached with two locks on two opposite sides. 30-35 liters, high density polyethylene material. As per sample

Kit manual

Kit manualalong with kit

Limit and continuity

Size 200x200x 4mm 3 movable arrows working on particular path of graph made of plastic and two arrows extra provide as per sample . Packed in plastic box. As per sample.

Linear programming

1. Plastic sheet size 200x200x4mm. White sheet with graph. Sides as per graph, make 2mm holes on every line of the border line on all four sides. As per sample 2. Plastic transparent sheet one is 210x180mmx0.3mm for linear programming (maximization problem) and another three sheets for linear programming (minimization problem) 3. Aluminum dowels 2mmx15mm lenght with head. 4. Five elastics with three arrows yellow, Red and Green fixed on every elastic. One elastic 50mm two elastics 70mm & two other elastics 120mm with terminal, as per sample As per sample

Permutation and combination

Plastic sheet of size 205x230x3.2/3.5mm Rectangular pieces with multi colour printing and 2 jigsaw cuttings inside for fixing 2 strips of 1.8mm each made of plastic. As per sample

Plane passing through the line of intersection of two plane

Plastic white sheet of size 200x200x3.5/4 mm and 3 square sheetcoloured red, blue and yellow, size 100x100x1.8/2mm, made of plastic. And three slot cuttings on base sheet as per colouredsheetthickness anddepth 1.8/2 mm As per sample

Principal of mathematical induction

Plastic sheet of size 200x60x12mm 5 multi coloureddiscs ofdia. 65mm- Yellow, dia60mm-White, dia,55mm- Green,dia. 50mm-Blue and dia. 45mm- Red. All discs with center hole and thickness 2mm. Also 3 plastic dowels made of polymer. Center distance between one pillar to another pillar 66mm. Height of pillar 30mm. As per sample

Probability

1. Size 70x25x3mm, rectangular sheets having 8 pieces each of 10 transparent red & blue colour and 8 pieces in white opaque colour with printing. Made of plastic with tray. 2. Size 60x20x1.6/2.5mm, Six rectangular pieces made of plastic as per sample with 8.5mm round coins. 15 pieces in three colours. As per sample

Projection of Vector a on vector b

Plastic sheet of size 225x300x3.5/4mm with two steel rodsof dia.4mm. Both rods 5mm bent at one end after the lenghts of 180 and 160mm. Working model. As per sample.

Relations & Functions

Size 225x 225x3.5-4mm in whitecolour with 2 elliptical shaped pieces in yellow colour pasted on white sheet. 10 different pieces with round edges of size 55x22x1.8mm each with center hole. Print Ali, Bhanu,Chavi, Divya, Ekta, Mohan and a,b,c,d,e and m as per sample. 10elastics with 1 arrow and 2 lugs on both ends. Also 20 nos. aluminimum dowels of 3mm dia with appropriate height made of plastic. As per sample

Sets

(iv) Base sheet in green colour withsize 125 x 125 x 4mm Threediscs(out of whichone disc in blue colour with 70mm dia and one circle in red colour with 60mm dia & one circle in yellow colour with 50mm dia.) All three disc intersect each other generating a shape with black colour in the center along with generating white colour between any two intersecting disc, made of plastic. Mark 1 on green square sheet, 2 on yellow disc, 3on blue discs, 4 on red disc 5,6 & 8 on white pieces and 7 on black piece. All pieces have the same thickness of 2 mm. All items As per sample

Sum of first n natural numbers and sum of cubes of first n natural numbers

White piece of plastic sheet of size 200x225x6mm with 100 inbuilt aluminimum pins of height 2mm. equidistant, in ten rows to hold square pieces. 110 square pieces of size 20x20x2mm with colours (White-2, Red- 10,Green-30 & Blue-68) with center hole. Also 1 small name plastic strip of size 160x200x2mm with printing on both sides which can be fitted on the big white piece. As per sample.

Sum of squares of first n natural numbers

ABS plasticcubes with sides 20mm accurate size, 5mm to 8mm dia holes with depth of 5mm on five faces. sixth face will have a Leg to push fit into the holes (Unfix cubes).As per sample

Three dimension

14/1 Size 100 X 100 X 2.5 plastic sheet with jigsaw cuts on each side along with small holes on the sheet as per sample 2 small rectangle sheets of size 100x50x2.5mm with jigsaw cutting and holes and 2 small rectangular sheets of size 100x50x2.5mm with jigsaw cutting. Two iron rod as per hole diameter and lenght 100 mm. 14/2 Transparent sheet plastic cuboid with size 50x60x70 mm open from one side, along with 4 steel rod of appropriated size 104mm should be equal. As per sample

Trigonometric function (cos x )

Plastic transperant sheet of size 200x200 x0.3mm. Graph printed as per sample. As per sample

Trigonometric function (sin x)

Plastic transparent sheet of size 200x200x0.3mm. Graph printed as per sample. As per sample

Trogonometric function (tan x)

Plastic transperant sheet of size 200x200x0.3mm Graph printed as per sample and arrow to be marked on tan x graph. As per sample