Products
Categories
Upper Primary Mathematics Kit ("U.P.M.K.")
A pack of cards numbered from 1 to 100
Plastic coated on both sides As per sample
A pack of cards numbered from 1 to 100
Plastic coated both side As per sample
Abacus
a) Abacus stand Plastic base 120 x 30 x 15 mm with as per dowell dia push fitted in holes. 7.5 mm deep 5 holes. b) Aluminium Dowels Dia 6 x 110 mm.Quantity per Kit-6 c) Beads of one bright colour As per sample Quantity per Kit-50 Nos.
Abacus a) Abacus stand
Plastic base 120/150 X 28/30 X 15/18mm with as per dowel dia punch fitted in holes. 8mm/ 10mm deep 5 holes. Marking as per sample. As per sample
b) Aluminium Dowels
Dia 6 X 100/102mm. Write 100, 10, 1, 1/10, 1/100 in while colour on box As per sample
c) Beads of one bright colour
"Diameter 12.5mm X 10mm height and throughout hole dia
6.5/7mm As per sample"
Board showing numbers+104 to- 104
A4 sizex2,Plastic coated on both sides
As per sample
Board showing numbers +104 to -104
A4 size x 2 , Plastic coated both sideAs per sample
Circle
a) Four equal parts of a circle, 2 marked with A Blue colour Plastic corrugated sheet 3 mm thickness dia 160 mm. b)Six equal parts of a circle, 3 mark with A c) Eight equal parts of a circle, 4 marked with C d) 12 equal parts of a circle, 6 marked with D e) 16 equal parts of a circle, 8 marked with E f) 2 equal parts of a circle g) 3 equal parts of a circle As per sample
Counters
Plastic dia 20mm (whose one side is
blue and other side is red) As per sample
Counters
Plastic, dia 20mm (whose one side is blue and other side is red) As per sample
Counters of different colours
Plastic, 20 mm diameter X 2mm thickness. Different 4 colours two of each colour. Red,Blue,Yellow and
Green As per sample
Counters of different colours
Plastic 20 mm dia x 2 mm thickness. different 4 colours two each colours.As per sample
Cover Slips
0.5 mm thick, 18 mm square glass pieces.
Cut outs of
a) Parallelogram Plastic corrugated sheet 3 mm thick blue colour. Length 120 mm, width 85 mm, one angle 750. Labeling with black colour. b) Triangle cut from Parallelogram c) Trapezium and triangle to form the Parallelogram d) Two congruent triangle e) Parallelogram showing triangles on it. Triangles A and C fitting on triangle B f) Two congruent parallelogra As per sample
Cut outs of paralleogram
Parallelogram Plastic corrugated sheet 3mm thick, blue colour.
Lenght 120mm, width 85mm, one angle 75 degree Labeling with black colour. As per
sample
b) Cut outs of
Triangle and Trapezium (parallelogram)"
Triangle cut from a Parallelogram As per sample
c) Cut outs of Triangle and Trapezium (Rectangle)
Trapezium and triangle to form the rectangle Triangles in Parallelogram and rectangle to be of the same size. As per
sample
d) Two congruent Trapeziums
(parallelogram)"
Two congruent Trapeziums forming a Parallelogram Each part to be separated As per sample
e) Triangle A, B, and C from a parallelogram
Parallelogram showing triangle in it. Triangles A and C fitting on triangle B As per sample
f) Two congruent Triangles
Two congruent Triangles As per sample
Dice 1 to 6
Blue and Red Cube 18/20 mm.
side,edges rounded As per sample
Dice 1 to 6
Blue and Red Cube 18/20 mm. side edges rounded As per sample
Dowels
Stainless steel, length 18 mm and dia 2 mm. with round edges. As per sample
Electric bell
Plastic base 190 x 120 x 15 mm, attached with steel bell cover of dia 77 mm, two brackets attached to MS strip for striker to bell along with rectangular coil having 26 SWG super enameled copper wire of 600 turns (225 gm wire) and iron core to fit in the coil. As per sample.
Fly nut and Screw
Mild steel, chromium plated,lenght 15 mm, metric thread (M4), round head washer type.With fly nut. As per sample
Fly nut and Screw
Mild steel, chromium plated, length 15 mm, metric thread (M4), round head or HDPE moulded. With fly nut. As per sample
Four equal divisions of a circle
Four equal spanision of a circle all marked with A. Blue colour plastic corrugated sheet of 3mm thickness diameter 160mm. its thickness may be increased to 5mm. All pieces should be cut in the form of sectors. As per
b) Six equal spanisions of a circle
six equal spanision of a circle, all marked with B As per sample
c) Eight equal spanisions of a circle
Eight equal spanisions of a circle all marked with C. As per sample
d) Twelve equal spanisions of a circle
Twelve equal spanisions of a circle all marked with D. As per sample
e) Sixteen equal spanisions of a circle
Sixteen equal spanisions of a circle all marked with E. As per sample
f) Two equal parts of a circle
Two equal parts of a circle As per sample
g) Three equal spanisions of a circle
Three equal spanisions of a circle. Note- Thickness of each sheet be increased to 5mm As per sample
Full Protractor
Marking at place to be 320 degree and 340 degree in place of 220 degree and 240 degree respectively Transparent plastic, with diameter 125mm approx. thickness 2 mm. Double angle marking 0-360degree With center hole dia 4mm. on center point. As per
sample
Full Protractor
Transparent plastic dia 120 mm, thickness 2 mm. Double angle marking 0-3600 With center hole dia 4mm. on center point. As per sample
Geo - board / Geo-board pins
ABS material,210 X 210 X15mm. One face has grids of 10 mm square 2mm dia X 7mm deep. Corners of each square except boundary corners of the squares i.e. total square 289. other side four rounds with 2.5mm diax 6mm height dowel inbuilt dia. Having 70, 110, 150, 190 space mm each dia. 20 dowels inbulit in each circle and 1 dowel
inbulit at centre point. As per sample 2mm dia X length 15mm of aluminum pins with rounded head As per sample
Geo-board
ABS material, 190 x 190 x 10 mm. One face has grids of 10 mm square with 2 mm dia holes at all corners of squares. Boundary corners of grid squares are without holes. As per sample
Half Protractor
Transparent, plastic, withdia.96 mm, thickness 2 mm. Double angle marking 0-180 degree. With center hole dia
4mm. on base line. As per Sample
Half Protractor
Transparent plastic dia 90 mm, thickness 2 mm. Double angle marking 0-1800 With center hole dia 4mm. on base line. As per sample
Kit Box along with carton
20 12mm.ply box outer size 425 mm. x 300 mm. x 115 mm. heights with flap. Two part should have suitable hinges and locking system As per sample. Inside of the box and flap have pockets potting the kit items As per sample. the front side of the box in centre folding type handle As per sample. Painted with teak colour and in side gray colour. Carton packing and placing of kit box ready for transport.
Kit box with carton
Plastic molded box in Red colour overall size 340mmx340mm x height 110 mm with tolerance +/-5mm and sheet thickness 5mm Two parts and joint with two pines on side all corner round shape and top to bottom taper 10 degree approx and handle for carrying with locking system. Inner side arrange for partition two pieces taper shape plastic strip for partiton and outer side etching. Whole box weight not less than
one Kg. As per sample.
Kit Box with carton 6 ply
Main Body of 24 SWG and doors and partitions of 26 SWG M.S.Sheet. Doors will be fitted 15 mm above the ground level with main body. Right hand door should have two racks with 2 size of holes to accommodate 42 containers/vails. The rack partition should have guides (As per sample) for free movement. Rack size 220mm x 100mm x 15mm. M.S.Sheet 24SWG. 1st rack should have 18 holes dia 26 mm and 2nd rack to have 29 holes (dia. 15 mm 20 holes. And dia 26mm 9 holes) Inside painted Light Grey. Main body and doors may be of different matching colours. The doors should have suitable piano hinges duly spot welded/riveted etc. with main body. Provision for locking system (As per sample) & two folding type handle 4mm dia for carrying box. Provision for supporting rest for hanging doors to be made. Allover box size 530 x 305 x 460mm. As per sample.
Kit manual
Kit manual along with kit
Light Emitting Diod (LED)
Standard
Panel for Connections
Wooden box / plastic ABS 170 mm x 140 mm, Taper 50 mm back and 20 mm front side, painted white, markings in black.
DC Voltmeter : 0 - 20 V with resolutions of 0.4 V, 0 – 1 Amp. with resolutions of 20 mA.
Rectifier : Four diode rectifier bridge circuit (Full wave rectification of AC).
Panel connections : For input / output etc. As per sample.
Paper nets for solid geometrical shapes (a)
350 GSM papere, UV/ coated 60 X 60 X 60 mm cube As per sample
(b) Cuboid
65 X 65 X 40mm cuboid As per sample
(c) Cone
Cone with slant height of 120mm and circular based diameter of 80mm As per sample
(d) Cylinder
Height: 130mm and circular base diameter 60mm. As per
(e) Prism
Height 100mm, equilateral triangle of sides of 55mm As per sample
(f) Pyramid (with triangular base)
4 equilateral triangles of sides 93mm As per sample
(g) Pyramid with square base
Square base sides of 70mm, equilateral triangle of sides 70mm. As per sample
(h) Hexagonal Base Prism
Hexagon side 40mm & hexagonal base prism height 120mm. All the shapes plastic coated on both sides As per
Paper nets for solid geometrical shapes
a) Cube 350 GSM paper, UV / coated 60 x 60 x 60 mm cube As per sample b) Cuboid 65 x 65 x 40 mm cuboid As per sample c) Cone Cone with slant height of 120 mm and circular based dia of 80 mm. As per sample d) Cylinder Height : 130 mm and circular base dia 60 mm. As per sample e) Prism Height 100 mm, equilateral triangle sides of 55 mm As per sample f) Pyramid (with triangular base) 4 equilateral triangles with sides 93 mm As per sample g) Pyramid with square base Square base sides 70 mm, equilateral triangle sides 70 mm. All the shapes plastic coated both side. As per sample
Perspex Plano Convex Cylindrical Lense
Dia. 25 mm , half of the diameter x 15 mm height.
Plastic box
140/150 X 90/95 X 40/45mm.
Plastic box
19 140 x 90 x 40mm. As per sample
Plastic Cubes
ABS plastic cubes with sides 20 mm accurate size, 5 mm to 8mm diaholes with depth of 5 mm on five faces, Sixth face will have a peg to push fit into the
holes. As per sample
Plastic Cubes
ABS plastic cube with sides 20 mm accurate size, 5 mm to 8mm dia holes with depth of 5 mm on five faces. Sixth face will have a peg to push fit into the holes. As per sample
Plastic Strip (Type I)
Transparent Perspex sheet or plastic
moulded 262 X 20 X 2.7 mm to 3 mm, having 3 holes of dia 5 mm at a distance of 50 mm, 120 mm and 190 mm from one end . 4 slots Of 25 X 5mm with both ends rounded to semi- circle.Location of slots:1st slot:0-
25mm, 2nd slot :70-95mm, 3rd slot: 140- 165mm, 4th slot: 210-235mm Marking should be in black colour. As per
sample
Plastic Strip (Type I)
Transparent Perspex 262 x 20 x 2.7 mm to 3 mm, having 3 holes of dia 5 mm at a distance of 50 mm, 120 mm and 190 mm from one end. 4 slots 125 x 5 mm with both ends rounded to semi-circle. Location of slots: 1st slot : 0-25 mm, 2nd slot : 70-95 mm 3rd slot: 140-165 mm, 4th slot: 210-235 mm As per sample
Plastic Strip (Type II)
Transparent plastic moulded or Perspex
sheet 262 X 20 X 2.7mm to 3mm, having 2 holes of dia 5 mm at a distance of 50mm and 120mm from one end. 3 slots X 5mm width with both ends rounded to semi-circle.Location of slots:1st slot: 0-25mm 2nd slot :70- 95mm 3rd slot :140-235mm Marking should be in black clolour. As per
sample
Plastic Strip (Type II)
Transparent plastic 262 x 20 x 2.7mm to 3 mm, having 2 holes of dia 5 mm at a distance of 50 mm and 120 mm from one end. 3 slots 125 x 5 mm with both ends rounded to semi-circle. Location of slots: 1st slot : 0-25 mm 2nd slot : 70-95 mm 3rd slot : 140-235 mm As per sample
Rubber bands
Standard item assorted size thin rubber band good quality As per sample
Rubber bands
Standard item assorted size
