Products

3000 Kgf Capacity
Manually Operated & Manual cum Electricity operated

B3000 (J) Brinell Hardness Tester 3000 Kgf.
Model AI B-3000(J) : Simplest model of Brinell Hardness tester with mechanical Design. Loading, unloading manual, Best suitable for testing batch quantities.

B-3000(H) Brinell Hardness Tester 3000 Kgf.
Model AIB-3000(H) : Machine designed with a hydraulic power pack and control circuit for effortless loading unloading operation. A dial gauge in front measures depth of ball penetration. This facilities production testing within tolerance limits by compression method.

B-3000(0) Brinell Hardness Tester 3000 Kgf.
Model AIB-3000(O) : Basic machine design and operation similar to AIB-3000(H). In addition, an ?optical device? with 14x magnification provided in front to project data of ball impression on glass screen with a micrometer measuring system with 0.01 mm accuracy. This indenter swivels and projects dia of ball impression immediately after unloading operation which avoids additional time for measurement of ball impression. This gives real Brinell number on production testing.

The machine is designed for determining the compression strength of cement concrete cubes upto 200mmx200mm and cylinders of size upto 200mm dia x 300mm height. The machine is hydraulically operated and are available in manually operated version and manual cum electrically operated versions. We are quoting below our prices for both the versions and the types on our range of manufacture:

Capacity 100 Tonnes : Manually Operated
Channel type loading Unit
Same as above but both Manual cum Electricity operated

Capacity 200 Tonnes: Electrical Operated : Channel Typoe
Loading Unit With Single Hydraulic Pressure Gauge Reading
0 - 200000Kgf X 1000Kg

Same As Above But With 2 Hydraulic Pressure Gauges Reading
0 - 200000Kgf X 1000Kg And 0 - 100000Kgf X 500Kgf Divisions

Same As Above But With 3 Hydraulic Pressure Gauges Reading
0 - 20000 Kgf X 1000 Kgf; 0 - 100000 Kgf X 500 Kgf And 0 - 50000 Kgf X 250 Kgf Divisions
Capacity: 300 Tonnes: Electrically operated with
Single Hydraulic Pressure Guage reading 0 - 300000 Kgf x 1500 Kgf

Same as above but with 2 Hydraulic Pressure Gauges reading 0 - 300000 Kgf
X 1500 Kgf and 0 - 200000 Kgf x 1000 Kgf spanisions

Same as above but with 3 Hydraulic Pressure Gauges
Reading 0 - 300000 Kgf x 1500 Kgf; 0 - 100000 x 1000 Kgf and
0 - 100000 Kgf x 500 Kgf spanisions

Note: If any of the above quoted 200 Tonnes Compression Testing Machines are required in Two Pillar Compression Type Models

The machine strictly conforms to IS 1828 is designed for testing metalsand other materials under tension, compression, bending / Transverse loads. It is computerized and incorporates Germen scada software with logic controller of Fanue. This computerized Universal Testing Machine is supplied complete with PC,Monitor, 104 Keys Key Board,Logitech Mouse. The electronics come in a rugged and dust protected IP 68 enclosure.

Features

Automatic data capture,storage and graphic display.
Recording storage and retrieval of results and details.
Real time monitor display to allow Operation/system interaction.
Auto load ranging.
On line display of load/extension characteristics.
Tare load ,peak hold and reset elongation facilities shall be available.

The equipment is designed to reveal the cupping qualities of metal sheets and strips. It can also be used for testing adhesion, elasticity and porosity of coats of paints or varnish by way of comparison. The material after fracture gives in grain structure and contitution.

Features:

• The big handle and the intermediate gearing provided make easy pressing and swelling out of the charged sheet metal by the punch.
• It is easy to get the pointer to zero as the top of punch and furrow holding plane are always kept to coincide by measurement correction panel.
• A necessary tolerance, 0.05mm is obtained by the rear back screw, easily and precisely.
• By utilizing the attached test piece holders, suitable tests for nos. 1,2 and 3 test pieces, can be easily performed at the most normal location.
  

Installation:

It is recommended that the machine is mounted on a table. It reserves rights of change in the above specification due to constant improvement in design. The dimensions given above are all approximate. Erichsen tester is designed to carry out Erichsen Cupping test on metals. Quick clamping and manual operation facilitates faster and trouble free working of the machine.

For metals: Reserve Bending, Cantilever type supplied complete with jigs and fixtures mounted an elegant table with motor, weights, etc.
Features:
This machine is used to test the Fatigue strength of materials and to draw S-N diagram by research institutes, laboratories, material manufacturers and various industries. This is a rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and loaded such that it experiences a uniform bending moment. The specimen is rotated at 4200 rpm by a motor. A complete cycle of reversed stresses in all fibres of the specimen is produced during each revolution. The bending moment is applied with a lever system and can be easily changed by moving a weight over the lever. Total number of revolutions at which the specimen fails are recorded by a Digital counter. An interlocking system puts off the motor at specimen failure. Machine meets requirements of IS 5075-1969

Technical Specifications:

1. Maximum bending momentkg cm 200
   
2. Bending moment adjustable kg cm25-200
   
3. Ranges I-kg cm 25-125 II-kg cm 125-200
   
4. Gripping dia of specimen mm 12
   
5. Testing dia of specimen mm 8
   
6. Rotating Speed rpm 4200
   
7. Accuracy of applied bending moment.
   
8. Digital counter No. of digits 8
   
9. Power required HP 0.5
   
10. Main supply 3ph,440,V,50Hz,A.C.
    
11. Overall Size (approx)mm 1000 L.X.
    
12. Weight (approx.)kg 120

?The system would be used for measuring microscopic hardness in micro Vickers of metals/alloys, various phases/micro-constituents present in metal matrix, thin wires & sheets, diffusion coatings and case depth of carburised/ nitride components etc.

Features:

A low cost upto-mechanical instrument which can be used for measuring microscopic hardness in micro Vickers. The instrument comprises of a microscope with a filar micrometer eye piece mounted on a stand, loading and unloading mechanism attached to the microscope for taking an indentation of a diamond indenter on a specimen surface under certain load in gms, an illumination system mounted on the microscope and rotating table having X and Y movements.

Specifications:

Viewing system

• Objective 40x
• Micrometer eyepiece 10x
• Total magnification 400x
• Working distance -1mm

Illumination system

• Lamp (6V,20W halogen)
• Fitted with condenser, filter, Iris diaphragm and Power supply through transformer from230 Volts, AC, 50 Hz
• IndentationsystemLoading/UnloadingMechanismWeights 10 to 200 gm
• Indenter Diamond Pyramid with an angle of 136 degreeRange 80 to 1000
• VickersAccuracy +/- 20 Vickers

Specimen Table

• Angle of turn 0 to 180 degree
• Longitudinal travel 0 to 100mm
• Crosswise travel 0 to 10mm
• Micrometer feed scale 0.01mm/span
• Total weight of the System 20kgs (approx)
• Dimensions 340x290x380mm (approx)

The machine strictly confirms to the relevant IS Standards and is designed for conducting IZOD & Charpy Tests on metals and alloys. The machine is supplied complete with strikes for conducting IZOD and Charpy Tests.

Optional Accessories :

Caliper gauge for checking V notch for Izod & Charpy as per BS:131:PART:1,2,3.
Depth notch gauge including V & U notch, angle & radius
Self centering tong.
V-notch milling cutter.
U-notch milling cutter

The machine is combined version, wherein both Rockwell Hardness under A,B and C Scales and Brinell Tests can be conducted. The machine is supplied complete with ball and diamond indentors together with Test Block for HRB and HRC Scales and Ball Indentor for Brinell Hardness test together with an illuminating type Brinell microscope complete with a BHN Conversion Table.
Capacity: 250 KGF

Technical Data

Foreward
The equipment is designed for testing Tension and compression Springs.

Description:
The machine consists of a robust base on which two columns are fitted with a contraption for holding Tension springs with a rotating handle and a pair of Compression Platens for Compression Springs. A Mechanical Graduated 0-1000 kgf is provided on top that indicates the load against a pointer. All the Steel columns are Electro plated & the shell is powder coated.

Technical Specifications: ?
Maximum load capacity -50kg ?
Resolution of load measurement - 0.2 kg ?
Resolution of Deflection measurement ? 1mm ?
Overall Size (l x b x h ) - 500mm x 300mm 1500mm ?
Overall weight - 60 kg (approx) ?
Stiffness of the Spring both closed and open coil can be found out using same experiment.

The machine is designed for determining Tensile Strength and Elongation Properties of a variety of materials. Each machine based on its rated capacity has 3 Load Ranges as detailed against each capacity quoted. The machine is operable on 415 volts, 3 phase 50 Hz AC supply and is supplied complete with one set of grips for holding the specimen under test. The detailed specifications of the machine is as per our enclosed leaflet.

A. Capacity : 50 Kgf
Load Ranges :
0 - 50 Kgf X 100 Gms
0 - 25 Kgf X 50 Gms
0 - 10 Kgf X 20 Gms

B. Capacity : 100 Kgf
Load Ranges :
0 - 100 Kgf X 200 Gms
0 - 50 Kgf X 100 Gms
0 - 25 Kgf X 50 Gms

C. Capacity : 250 Kgf
Load Ranges :
0 - 250 Kgf X 500 Gms
0 - 100 Kgf X 200 Gms
0 - 50 Kgf X 100 Gms

D. Capacity : 500 Kgf
Load Ranges :
0 - 500 Kgf X 1 Kgf
0 - 250 Kgf X 500 Gms
0 - 100 Kgf X 200 Gms

E. Capacity : 1000 Kgf
Load Ranges :
0 - 1000 Kgf X 2 Kgf
0 - 500 Kgf X 1 Kgf
0 - 250 Kgf X 500 Gms

F. Capacity : 2500 Kgf
Load Ranges :
0 - 2500 Kgf X 5 Kgf
0 - 1000 Kgf X 2 Kgf
0 - 500 Kgf X 1 Kgf

G. Capacity : 5000 Kgf
Load Ranges :
0 - 5000 Kgf X 10 Kgf
0 - 2500 Kgf X 5 Kgf
0 - 500 Kgf X 2 Kgf

H. Capacity : 10000 Kgf
Load Ranges :
0 - 10000 Kgf X 20 Kgf
0 - 5000 Kgf X 10 Kgf
0 - 2500 Kgf X 5 Kgf

The machine is designed for testing metals and other metals and other materials under tension, compression, bending/transverse loads. The machine is operable on 415 volts, three phase 50 hz ac supply and based on the rated capacity of the machine, has four load measuring ranges, as quoted below against each rated capacity of the machine. An autographic continous roll load elongation recorder, incorporated in the machine products a graph of load vs elongation.

Standard Accessories

For Conducting Tension Tests :
Clamping jaws for testing Round and Flat test specimens under Tension Tests.

For Conducting Compression Tests:
A PAIR OF compression Platens, duly hardened, ground and polished, with the bottom platen provided with guide-lines for placing the test specimen co-axial with the hydraulic RAM.

For Conducting Bending/ Transverse:
A table with adjustable rollers complete with mandrel for conducting bending/Transverse Tests

Vickers Hardness Tester is simple & accurate in design. It is Suitable for measuring the hardness of precision metallic parts with wide testing range from soft to hard & their accurate results are widely acclaimed. These testers strictly conform to IS” 1754 part I & part II 1986.

Features:

Wide testing range from soft metal such as lead, up to the hardest, like hardened steel.

Tiny indentation allows testing of a precision finished parts.

Thin sheet metal are perfectly tested. Because applied load is very small

Same Hardness number is obtained on the same specimen, regardless of the load applied.

Motorized loading and unloading cycle.§ Built-in projection screen to get accurate results.

Technical Data:

Test Loads : 5, 10, 20, 30, 50kg

Magnification of optical projection : 70x

Max.Test Height (mm). : 200

Scale least count (mm). : 0.001

Depth of throat (mm). : 133

Dimensions of machine (mm) : L585xW290xH860

Weight (Approx) : 73kg

Power Supply : 220v AC, 50Hz, 1-phase

Standard Accessories:

Standard Test Block : 1 pc.

Diamond Penetrator : 1 pc.

Weights : 1 Set.

Flat Anvil : 1 pc.

Vee-type Anvil (Small and Big) : 1 pc.

Each Spanners : 1 set

Electric cord : 1 pc

Instruction Manual : 1 book