For using D flash light cell as small, low-voltage power source in the science laboratory, kits etc.
Snap-fit aluminum holder for 33mm diameter dry cells with Fahnstock clips on both sides for external connections. Provided with holes for attaching to a board or panel. Any number of cells can be connected in series or parallel.
For wheatstone bridges and potentiometers.
A brass metal knife edge is mounted on one end of an insulated handle with a 4mm socket binding post terminal on the other end. Overall length 100mm. Pack of 10 pieces.
For uses involving changing magnetic flux in electromagnets, electric motors, generators and transformers.
Dimension (d x l), 200 X 6mm.
To provide external magnetic field where required and to change the rate of magnetic flux passing through a coil.
Consists of a plastic spool with windings of insulated copper. End plates have brass binding posts. Capacity 10 amperes when used intermittently and 5 amperes when used continuously.
As a substitute for iron filings for studying the phenomenon of magnetic fields. Form clusters and chains between unlike poles of magnets.
Polished, hardened spheres of diameter 3mm. Pack of 100.
Improved version of simple meter bridge. For precise measurement of an unknown electrical resistance and for comparing nearly equal resistances without determination of the end-resistances.
Comprised of a hardwood base 1.1 meter long with laminated top and plastic feet. A meter long constantan resistance wire, 24swg, is stretched along a meter scale graduated in millimeters fitted on this base. Each end of the wire is firmly and precisely attached to plated copper strips. Three more copper strips are fixed parallel to the wire providing four gaps. Electric connections are made through 4mm socket binding post terminals. Supplied with a knife- edge jockey to make contact with resistance wire and the galvanometer (not supplied).
SB26083M | Alnico I Bar Magnets 1/4" x 1/2" x 1-1/2" |
1256-2 | Alnico Bar Magnets, 1 Pair |
SB14309M | Alnico I Bar Magnets 1/4" x 1/2" x 2" |
Made of brass on an insulated handle.
-01 | Cone 100x50mm (Length x Max. Diameter) |
-02 | Cylinder 125x50mm (Length x Diameter) |
-03 | Sphere 50mm (Diameter) |