Useful as a basic component for any electrical laboratory.
Mounted on bakelite base. Allows visible connection for easy use. With screw holes and suitable for bench fixing and panel mounting. Available in four configurations.
Open bulb miniature socket.
Consists of a 53mm diameter plastic base with two plated brass Fahnstock clips for connecting wires to a miniature lamp bulb holder.
For reading of topographical and tourist maps and determination of azimuthal location of a given place. Suitable for overhead projector.
Transparent design. Diameter 50mm with black and red magnetised needle. Mounted on a transparent plastic base with 0-6cm x 1mm scale on bevelled end of the base plate. Full circle spanided into 360? with N,S,E and W directions indicated. Graduated every 5? and labelled in 60? increments. The needle housing is liquid filled to damp oscillations in just 5 seconds. The red tip indicates north. Meridian lines help in accurate plotting of angles. Adjustable wrist strap. Made in Russia.
Useful for student demonstrations, plotting magnetic fields etc.
Made from magnetic steel strips. Painted red and stamped with N and S to indicate north and south poles. Supplied in pairs with cardboard separator and plated soft iron keepers. Dimensions:
Used for making or breaking the electrical circuits. Brass plug and brass blocks with tapered hole, terminals fitted on the blocks, mounted on a bakelite base.
-01 | One Way |
-02 | Two Way |
For studying electromagnetic induction, ferromagnetism and principles of a transformer.
Consists of two coils wound with enamelled copper wire over heavy plastic spools fitting one within the other. The inner primary coil has 1250 turns of heavy wire and the outer, acting as secondary coil with 250 turns of fine wires. Square supports of thick insulating material are used as vertical or horizontal mount. Both coils are equipped with binding posts and a soft iron core for induction studies.
For transferring electrostatic charges from one body to another such as Leyden jars and electroscopes.
Consists of a plated brass disc of diameter 25mm on a 15cm long insulated handle.
For flash lamp bulbs.
Consists of a rolled shell of brass mounted in plastic base with two screw terminal connections. Diameter 29mm and height 16mm. For use at voltages up to 50V A.C.