Four equal division of a circle / Six equal divisions of a circle / Eight equal division of a circle / Twelve equal divisions of a circle / Sixteen equal divisions of a circle
Four equal spanisions of a circle all
amrked with A Blue colour Plastic corrugated sheet of 3mm thickness diameter 160mm. Its thickness may be increased to 5mm. All pieces should be cut in the form of sectors. As per
sample Six equal spanisions of a circle, all marked with B As per sample Twelve equal spanisions of a circle all marked with D. As per sample Sixteen equal; spanisions of a circle all marked with E. As per sample
Algebraic Identities
(i) 1. Square shaped plastic sheet of side 76mm 2. Three cutouts-one as a 38mm
square having yellow colour and two pieces of same size of blue colour- 38 X 76mm with a cut of 45 degree from the corner of base sheet reaching up to 38mm square cutout (ii) plastic sheets in four pieces
two squares of 80mm.and 45mm. and another two rectangular shaped of 80mm X 45mm Note- Sheet thickness 3mm uniform for all tiles. (Remove flash from all
sides)
ALGERAI C TILES x2 ,
x , 1
All tiles in three sizes. Made in PLastic sheets/ plastic moulded1)x2-50mm. x .50mm. 5tiles in blue colour 2)x 50mm.x 10mm. 10 tiles in blue colour 3) 1- 10mm. x 10mm. 20 tiles in blue colour Packed in plastic box. As per sample Note-Sheet thickness 3mm & Printing on tiles required and flash remove all side all
algebraic tiles in blue colour.
Connectors (T-Type)
Flat rivet type 20mm height and dia 4mm with rubber sleeve. As
per sample
Connectors For (strip)
Stainless steel, length 25mm. and dia 5mm. with rubber sleeve. Push fitting for trigonometric circul;ar
board groove. As per sample
Connectors For holes
Stainless steel, lenght 25mm. and
dia 5mm. with sleeve.Push fitting for trigonometric circular board
holes. As per sample
Cut Outs for area of a circle
Blue colour Plastic corrugated
sheet 2.7/3mm thickness with diameter 160mm. five circle in 4,6,8,12,and 16 different equal parts. Sheet thickness 3mm and all spanisions marked A,B,C,D and
E, As per sample
CUTOUTS with CUBE
a) Cone b) Cuboids Cylinder d) Hemisphere
Plastic solid/hollow cube 60mm X 60mm with 4 sides top, bottom, right and left of the cube fitted with cone (dia-30mm, height-30mm), cuboid (30mm X 30mm X 15mm height), Cylinder (diia-20mm, height-20mm) and hemisphere (dia-30mm, height-15mm)
respectively. As per sample
CUTOUTS(For area of polygons)
a) A triangle and a trapezium marked as A and B respectively b) Three triangle marked as A,B and C c) Two triangle marked as T1 & T2 respectively d) Two trapeziums marked as C & D respectivelyA parallelogram plastic corrugated sheet 2.7mm/ 3mm. thick, blue colour, length 120mm, width 85mm, one angle 75o, labeling
with black colour. As per sample
Fly nut and Screw
Mild steel, chromium plated lenght 15 mm, metric thread(M4), round head washer type with fly nuts. As
per sample
Full Protractor(360o)
Transparent, plastic with diameter
125mm and thickness 2 mm. Double angle marking 0-360o withcentre hole 4mm on centre
point. As per sample
Geo-board / Geo-board pins
ABS material 210 x 210 x 15 mm. One face has gride of 10 mm square 2 mm x 7mm Corners of each square except boundary corners of the square ie total squares 289 other side four rounds with 2.5 mm dia. X 6mm height dowel inbuilt dia. Having 70,110,150,190 mm each dia. 20 dowels inbuilt in each circle and one dowel inbuilt at center point.
As per sample 2mm dia X length 15mm of aluminum pins with rounded head.
As per sample
Half Protractor(180o)
Transparent plastic dia. 96/100
mm. approx and thickness 2 mm. Double angle marking 0-180o with center hole 4 mm on base line. As
per sample
Kit box with carton
Plastic molded box in blue colour overall size 340mm X 340mm x height 110 mm with tolerance +/- 5mm and sheet thickness 5mm Two parts and joined with two pines on sides all corners round shaped and top to bottom taper 10 degree approx .Handle for carrying with locking system. Inner side arrangements for partition two pieces of taper shaped plastic strips for partition and outer side etching. Weight not less than one
Kg. As per sample
Kit manual
Kit manuals along with kit
Plastic Box
80mm X 70mm x 35/40mm As per sample
Plastic Strip (B Type)
Transparent Perspex/ Plastic moulded 264 x 20 x 2.7 mm to 3 mm having 3 slots of width 5 mm. at a distance of 0 to 0.3 mm. next to 50 to 200mm and again 220 to
250 all marking and numbering with center line in black colours.
As per sample
Plastic Strip(A Type)
Transparent Perspex/ plastic moulded 264 X 20 X 2.7 mm to 3 mm having 3 slots of width 5 mm. at a distance of 0 to 30 mm. next 50 to 200mm. and again 220 to 250mm. numbering on 0 to 25 Cm. markings in itonboth sides. with mm. , all marking and numbering with center line in black
colours. As per sample
Rubber bands
Standard item assorted size thin rubber band good quality
Set Square
As per Standard medium size.
Trigonometric Circle Board
260mm X 260mm X 12 to 13mm thick plastic board. take the center of the board 120mm from the bottom and 120mm from the left side and circle dia 200mm.
Circular groove 5mm X 10mm depth. X and Y making on the dials. Full protractor 360o marking in center and 5o to 10o marking outside of dials. Dia 5mmx 10mm hole in the center and top of circular board. Three side slot 5mm X 10mm depth from circle groove to out of board end as per sample fourteen holes and one blind hole in center of circle Note: Sheet board should be milky
white. As per sample