Products

Categories

Laboratory Testing Instruments

OZONE ROOM STERLIZER

OZONE ROOM STERLIZER

Ozone is the most efficient natural Board Spectrum Microbiological control substance and very reactive Disinfecting agent. It destroys Bacteria, Viruses and Cysts in a very short duration, when it comes in contact with any media i.e. water, air or any food item. Ozone is considered by most, to be the best available technology and a better alternative than using chemicals.

The concentration of O3 is higher or inhaled for longer duration. As per OSHA and other controlling agencies O3 concentration should not exceed
0.1 ppm (0.2mg/M3): 8 hours or more / day.
0.3 ppm (0.6mg/M3) : Maximum 10 minutes.

Ozone is very effective in reducing Bacterial load from environment and product itself. Ozone drastically increases shelf life of product and thus the products will remain fresh for longer duration.

Monitoring the concentration of Ozone in Air & dissolution in water is essential for control of disinfection. We manufactures equipment for monitoring & controlling Ozone in Air & Water. Monitoring system are equipped with low & high level alarms and can be integrated with process equipment if required.

PASS BOX (STAINLESS STEEL BODY)

PASS BOX (STAINLESS STEEL BODY)

The pass box is an equipment normally installed on the wall between the clean room and any other room. It is used for transfer of material from and into the clean room, without contaminating the air of clean room and without having to open room door. This is achieved with the help of interlocking type doors of pass box.

Principal of Working :
This equipment is installed on the wall between the clean room and the other room. the pass box has two doors at its extreme ends. One door opens in the clean room and other door open in the other room. these doors are electrically interlocked type so that any other door can be operated at a time. This avoids direct flow of air from the clean room to the other room or vice versa. This also avoid the need to open the clean room door frequently for transferring of material from & into the clean room. Thus, it helps in achieving the aim of material transfer without disturbing the cleanliness level of the clean room.

Construction :
It is made of Commercial board and all its external & interanal surfaces are dully laminated. L.M.S. or S.S. sheet body also can be supplied optionally. Each hinged door has wide glass viewing window, through which material kept in the pass box can be seen. These doors are electrically interlocked type, so any one door can be opened at a time. U.V. & fluorescent light and HEPA filter can be provided optionally.

AVAILABLE SIZE :
24"(W) x 24" (H) x 24" (D)

Other Sizes on request.

PEN-TYPE-CONDUCTIVITY-METER

PEN-TYPE-CONDUCTIVITY-METER

pH METER (DIGITAL)

pH METER (DIGITAL)

Digital pH Meter are ideal instruments for determination of pH Value of any solution. The results are displayed on a 3? digit display. These are unique instruments that combine convenience with accuracy and precision in analysis. The temperature compensation facility, both automatic and manual is available. The measurement range is from 0 to 14 pH with a resolution of 0.01 pH.

These are extremely useful instruments for agriculture and sil analysis laboratories, swimming pools, fertilizer plants, chemical industries, pharmaceutical industries, petroleum refineries, textile plants etc.

SPECIFICATIONS :

Display 3? Digit LED
Range pH: 0-14 pH
mV: 0 to ? 1999
Resolution pH: 0.01
mV: 1
Accuracy pH: ? 0.01pH
mV: ? 1mV
Temp. Compensation Auto : 0 to 100?C
Manual: 0 to 100?C
Input Impedance > 10?? ohms
Slope Control 80 to 120%
Recorder Output 0 to 10mV/pH
0 to 10mV/100mV
Adjustable
Power 230V ? 10% AC, 50 Hz
Dimensions 76 x 275 x 175mm
Sensor Combined pH electrode
POCKET pH METER

POCKET pH METER

RANGE : 0.0 TO 14.0 pH
RESOLUTION : 0.1 pH
ACCURACY (@200c/680F) : + 0.1 ph
BATTERIES : 3 x to 1.5 V alkaline
LIFE : approx 700 hours of use
DIMENSIONS : 150 x 30 x 24 mm
(5. 9 x 1.2 x 0.9?)
WEIGHT : 85 g ( 3 oz.)
POLARIMETER (220/400MM)

POLARIMETER (220/400MM)

  • Maximum Length of tubes which this model can take is 220mm; smaller tubes of course can be used. The tubes supplied have a bubble trap.
  • Polaroid Sheets used for polarizing the incident light.
  • Glass circular scale finely marked in angular degrees and also in ISS degrees. The range on ISS Scale is from?30 o + 130 o .
  • Permanent focus: Once the spaniding line is focused for the eye. The focus is not disturbed by inserting tubes containing solutions, regardless of the nature of solution or of the length of the tube.
  • Permanent good definition even with difficult liquids.
  • Rotating half shadow Effect.
  • Provision for attaching lamp to the instrument thus keeping alignment correct at all times.

Polarimeter is a reliable instrument for accurate measurement of Optical Rotations, for study of Polarization effects and for quick and easy discrimination between right-handed sugars such as Dextrose and left handed sugar such as levulose. The instruments find use in industries as well as in Colleges and Universities.

The Polarimeter essentially consists of a pair of polarizes arrange in a straight line, one of which (analyzer) can be rotated with respect to the other (Polaris) and the rotation measured on a spanided circle. The analyzer is rotated till it is ?crossed' with the Polaris. In this position the planes of he polarization of the polarizer and the analyzer, are mutually perpendicular, so that there is no transmission of light across the pair. Now if a tube containing an optically active solution is introduced between the polarizer and the analyzer, the light transmission is partially or wholly (if the optical rotation of the liquid equals90 o ) resorted. The analyzer is rotation again to obtain the ?no transmission? position. This rotation equals, the optical rotation of the liquid.
Since it is difficult to recognize the actual ?no transmission? position, one is able to obtain a ?range? only for no transmission. The definition of this range is quite subjective. To overcome this difficulty, in modern polarimeter, an extra device is used. This device is a ?half-wave plate?, covering half of the circular field of view. This plate introduces a certain path difference between light waves in the two halves of the field of view. Thus when the analyzer is rotated the intensity in one half of the field of view is extinguished slightly before the other half. At this point it is easy to continue rotation of the analyzer to obtain a uniform illumination of the field of view. This position can be determined quite accurately and is used as the desired position. The optically active substance (solution) is now introduced between the polarize and the analyzer and the uniform, field of view position is determined again to obtain the optical rotation of the liquid.

The circular scales are finely marked on a 10cm diameter circle both in angular measure and in International Sugar Scale. The smallest spanision on angular scale is 1 o ISS. The Sugar Scale is calibrated between?30 o (for Laboratory substances) and +130 o ISS. A spanided of 0.05o(3 minutes) on the angular scale and 0.1 o ISS. The Scale is properly illuminated to facilitate reading.

POLISHING MACHINE (Double Disc)

POLISHING MACHINE (Double Disc)

POLISHING MACHINE (Single Disc)

POLISHING MACHINE (Single Disc)

Polishing machines are used for preparing metallographic specimens & petrographic from pregrinding to smooth surface finish, for microstructure examination. The machine is basically of motor driven disc type to provide stepless variable speed from 400 to 1100 RPM approx. The driven is provided by suitable H.P. single phase 220V A.C. Motor. The brass ped steel disc of 8" or 10" dia (easily replaceable).
PROFESSIONAL LINE ANALYTICAL BALANCES

PROFESSIONAL LINE ANALYTICAL BALANCES

CX Series
OPTICS TECHNOLOGY(INDIA) Offers Exactly right performance and convenient features that you need to accomplish the most sophisticated weighing tasks

On OPTICS TECHNOLOGY( INDIA) you can weigh just about anything from really light weight samples to heavy weight objects. And if you want to do more than "Basic Weighing" the 5 application programs will let you easily perform the following

  • Differential weighing with Net-Gross formulation
  • Piece Counting
  • Percent Weighing
  • Averaging to weigh live animals
  • Toggling between any two units

21st Century high speed milling technology let us invent, latest monolithic systems with versatile advantages of perfect weighing system.

  • Excellent meteorological specification
  • Better protection against transportation & temperature drift
  • Fast response time & better stability

STANDARD FEATURES :

  • High-Contrast, Large, easy to read liquid crystal display
  • Splash proof & dust protected shell in compliance with IP54
  • Motorized calibration with built in weigh to obtain optimum result
  • Standard Bi-Directional RS232 interface allows you to plug in to PC or printer for data collection
  • Hanger for weighing below the balance
  • Minimal space requirement despite the spacious draft shield interior
  • Excellent wind protection, ensuring the best results in ambient environment
  • Integrated overloaded Protection
  • User selectable stability and filter levels
  • Conforms to GLP, GMP and ISO9000 standards
MODELCX 265 CX 301CX 220CX 120CX 65
CAPACITY 60/210 g 301 g 220 g 120 g 65 g
READABILITY0.01/0.1 mg 0.1 mg 0.1 mg 0.1 mg 0.1 mg
REPEATABILITY +0.02/0.1 mg + 0.1 mg + 0.1 mg + 0.1 mg + 0.1 mg
LINEARITY +0.03/0.2 mg0.2 mg + 0.2 mg + 0.2 mg + 0.2 mg
PAN SIZE (MM) 80 ?
RESPONSE TIME 3 sec 2 Sec
OPERATING TEMPERATURE 0? to 45? C
HOUSING DIMENSION 210 X 290 X 310 mm
WEIGHT APPROX 6.6 kg 5.3 kg
POWER SUPPLY A/C ADAPTER , 230 V + 20% 50-60 Hz
UNITS AVAILABLE g,mg,ct,lb,Oz,Ozt,tls,GN,dwt,tic,mom,K,tola,baht,MS
PROFESSIONAL LINE ANALYTICAL BALANCES

PROFESSIONAL LINE ANALYTICAL BALANCES

CY Series

OPTICS TECHNOLOGY Basic Analytical Balance gives you reliable weighing technology, speed, stability and high quality craftsmanship with excellent price/performance in real compact package.
.
OPTICS TECHNOLOGY(INDIA) Basic Analytical Balance comes with all the intelligent, capabilities you need for daily routine application in the lab and does it all reliably and precisely.

  • Net-total formulation
  • Piece Counting
  • Weighing in Percent %
  • Animals Weighing
  • Toggling between any two units

Latest DLS monolithic systems is more than one step ahead of the competition, offers.

  • Less movable parts
  • Fast response time & better stability
  • Excellent Metrological Specification
  • Better protection against transportation and temperature drift

STANDARD FEATURES :

  • High-Contrast, Large, easy to read liquid crystal display
  • Sealed, easy to clean keypad with large sized keys
  • User selectable stability and filter levels
  • Compact housing featuring and new space age design
  • Integrated overloaded protection
  • Easy access, all grass draft shield with doors that slid open effortlessly and quietly
  • Optional RS 232C Interface available to plug in a PC for data collection or printer or remote display
  • Conforms to GLP, GMP and ISO9000 standards

MODEL CY 204 CY 104 CY 64
CAPACITY 210 g 120 g 60 g
READABILITY 0.1 mg 0.1 mg 0.1 mg
REPEATABILITY +0.1 mg + 0.1 mg + 0.1 mg
LINEARITY +0.2 mg +0.2 mg + 0.2 mg
PAN SIZE (MM) 80 ?
RESPONSE TIME 2 Sec
OPERATING TEMPERATURE0? to 45? C
HOUSING DIMENSION 200 X 270 X 300 mm
POWER SUPPLYA/C ADAPTER , 230 V + 20% 50-60 Hz
UNITS AVAILABLEg,mg,ct,lb,Oz,Ozt,tls,tlt,tlh,GN,dwt,tic,mom,K,tola,baht,MS
ROTAP SIEVE SHAKER

ROTAP SIEVE SHAKER

Heavy duty(Improved Model ) FOR 8 ",12" & 18" TEST SIEVES The Rotap Sieve shaker is durably constructed and is run by ? H.P. Electric MOTOR 220 Volts A.C through reduction gear. Designed to carry upto 6/7 TEST SIEVES of 200 mm Dia (8") with one set lid & pan. It reproduces circular and hammering motion is given at . it reproduce Circular (revolution approx.: 280 to 320 R.P.M and tapping approx.: 140 R.P.M to 160 R.P.M No foundations are required.
ROTARY SHAKER

ROTARY SHAKER

Rotator shaker is used in blood banks and hematology laboratories for blood typing, cross matching and mixing of donor blood with anti-coagulant, V.D.R.L. Tests and other test.

Salient Features:-

  • Operates at 130/180 RPM (as desired)
  • Rotates Specimens in horizontal plane in 3/4" circle.
  • 30x30cm platform can accommodate slides, blood bottles, flasks & beakers by use of spring bottle holder.
  • Constructed of all steel finished with stoved enamel paint.
  • Turned up edges and rubber sheeting on platform to prevent slipping of specimen containers.
  • Platform rigidly supported by steel legs for smooth and silent rotation and heavy load can easily be supported.
  • Shaker mounted on four rubber suction feet to prevent creeping.
  • 1/35 H.P. motor operates on 220/230 volts A.c. only.
  • Supplied with brass ring maker for 12 rings.
  • Without thermometer.
  • Adjustable 0-30 minute timer with arrangement for continuous operation (optional).

Models:-

(A) 12" X 12"(4 Flask of 250 ml)
(B) 18" X 18"(16 Flask of 250 ml)
(C) 24" X 24 "(25 Flask of 250 ml)
(D) 36" X 36 "(36 Flask of 250 ml)


OR Any Non Standard Size

SEED GERMINATOR

SEED GERMINATOR

Most suitable for conducting various experiments ona variety of seeds under different conditions of temperature and tumidity. Atmospheric conditions are created within the chamber to perforated different experiments without going on to the field. The double walled unit has inner chamber made of anodized aluminum or Stainless Steel and outer chamber of M.S. sheet duly painted. Temperature from 5?C ? 1?C is controlled by Digital Temperature controller-cum-Indicator. Humidity (Not adjustable) is created in a S.S. water reservior fitted at the bottom to provide 90% to 95% ? 3% RH Humidity. Supplied complete with 14 adjustable perforated trays with exterior lighting arrangement on both sides & electronic Digital Temperature Controller - Cum - Indicator. Complete with cord and plug to work on 220/230 volts A.C. Supply.

INSIDE CHAMBER SIZE (W x H x D) :
555mm x 910mm x 605mm

OPTIONAL ACCESSORIES :-
a) Exterior lighting arrangement (on both sides)
b) Automatic timer (0-24 hours)
c) Electronic Digital Temperature Indicator-cum-Controller
d) Dual Setting Digital Temperature Controller for setting two different temperatures for day and night.
e) Automatic Voltage Stabilizer 3 KVA.

seed germinator

seed germinator

SEED GERMINATOR (DUAL CHAMBER)

SEED GERMINATOR (DUAL CHAMBER)

SHAKING TRAY SIZE: INSIDE

SHAKING TRAY SIZE: INSIDE

TRAY MADE OF S.S. 304 QUALITY)

(A) 275x275x75 mm. 6 Ltrs.

(B) 275x275x150mm. 12 Ltrs.

(C) 405x300x150mm 18 Ltrs

SO2 apparatus

SO2 apparatus

SOXHLET APPARATUS

SOXHLET APPARATUS

The complete soxhlet apparatus consists of solvent reservoir extraction assembly with 6 extraction places with concentric metal rings of various diameter to suit 100ml flasks to 250ml flasks and built in steam generator. Complete with stand, clamp holder soxhlet extraction (condenser) glass and extraction flask of 60 ml volume. Temp. range 50 C to 350 C.
SOXHLET APPARATUS WITH GLASS PARTS

SOXHLET APPARATUS WITH GLASS PARTS

STANDARD MODEL

STANDARD MODEL

  • Open & economical model
  • Change over from one gauge to the other by use of two needle valves fitted with the gauges.
  • Maximum pointer ( Lazy Hand) for peak value recording.
  • Accurate, reliable and one of the oldest selling model.
  • Machine available in various specifications to test Paper, Paper Board, Corrugated Board,
  • Solid Fibre board, Filter Cloth/ Industrial Fabric etc.
SUPER MODEL

SUPER MODEL

  • Fully enclosed model.
  • Bursting Strength displayed on flat angled gauges for greater accuracy.
  • Accurate, reliable and trouble free equipment.
  • Available with single or two pressure gauges.
  • Change over from one gauge to the other by a simple switch.
  • Machine available in various specifications to test Paper, Paper Board, Corrugated Board, Solid Fibre board, Filter Cloth / Industrial Fabric etc.
TABLE SIEVE SHAKER

TABLE SIEVE SHAKER

(FOR 8" & 12" TEST SIEVES)

(Soundless , Vibration type)

Fitted with F.H.P Electric Motor. It can accommodate 6 Test sieves of 8" Dai with Lid and pan. Speed can be regulated through variable speed regulator to work on 220 volts A.C (without Test Sieves) speed regulator to work on 220 volts A.C

TABLET FRIABILITY TEST APPARATUS (DOUBLE DRUM)

TABLET FRIABILITY TEST APPARATUS (DOUBLE DRUM)

TABLET FRIABILITY TEST APPARATUS (SINGLE DRUM)

TABLET FRIABILITY TEST APPARATUS (SINGLE DRUM)

The apparatus is designed to determine the abrasion rate and impact hardness of tablets. Two transparent acrylic drums rotated by superior quality constant speed sturdy motor, mounted in painted sheet metal cabinet with chemical resistant epoxy coating..

SPECIAL FEATURES: Realistic abrasion rate is obtained by pre-set revolutions through LED as compared to time setting, where voltage fluctuation may change number of revolution in pre-set time.

SPECIFICATIONS:

Drim Diameter : 285mm
Tablet Fall Distance : 140mm
Drive : 1/8 HP
Power Phase. : AC/230 volt Single
TABLET HARDNESS TESTER ( PHYZER TYPE )

TABLET HARDNESS TESTER ( PHYZER TYPE )

A handy, tough and direct dial reading type tablet hardness tester, working as pair of plairs, generates breaking force in single grip. The instrument offers accurate and reproducible result much faster other conventional hardness tester.

SPECIFICATIONS :

ACCURACY : + 0.2 kg
LEAST COUNT : 0.2 kg
SAFE TESTING FORCE : 20 kg
MAXIMUM TABLET DIAMETER : 25 mm
TABLET HARDNESS TESTER (MONSANTO TYPE)

TABLET HARDNESS TESTER (MONSANTO TYPE)

THIN LAYER CHROMATOGRAPHY ( T.L.C. APPARATUS )

THIN LAYER CHROMATOGRAPHY ( T.L.C. APPARATUS )

composing of : A) Applicator : the Thin Layer applicator is carefully constructed to give dependable service in drawing thin uniform layer variable form 0 to 2 mm. ( Minimum thickness attainable 0.1 mm.) Accurate design and skilled workmanship of the applicator gives no trouble in coating number of plates at a time. It is made of Aluminum finished in proper shape two pieces of feeler gauge are supplied to facilitate the setting of applicator supplied with Drawing Board, Drying Rack, Spotting Guide, Developing Chamber, Micro pipette, Silica Gel, Glass Plates.
ULTRA VIOLET CABINET

ULTRA VIOLET CABINET

Cabinet for Chromatographic analysis by ultra violet fluorescence.

  • Fluorescence analysis under laboratory lighting condition.
  • Fast, simple and convenient operation with independent controls at s.
  • Long wave and short wave lamps plus white light provides three menans of locating and identifying components.

DESCRIPTION: This chromatogram viewing cabinet combines both long and short wave ultra violet and also white light in a compact table- unit. This self-contained unit is designed for easy viewing and marking of chromatograms and also for general fluorescence studies.

Chromatograms can be viewed with 3600-4000Ao long wave or 2500Ao short wave ultra violet or with white light. The ultra violet lights can also blew used in combination if desired.

Black curtain on the front ensure darkness and brilliant fluorescence inside the cabinet, at the same time enabling the operator to adjust the samples and lights easily or marking the fluorescent spots.

CONSTRUCTION : Sturdy all metal construction and provided with two handles at the sides for transportation. Switches and starters are fitted at the for easy operation.

APPLICATION :
Long wave : Fluorescing Spots on chromatograms can locate compounds like dyestuffs, vanillin, flavones, alkaloids etc.

Short wave: Detects compounds, such as barbiturates, purine and pyrimidine derivatives, PTH-amino acids, DNP-amino acids and steroids.

In detection of traces of minerals, study of old inspections forgeries, chemical erasures, stains etc..

The cabinet finds application in quality control especially with pharmaceuticals, electronics and industrial fabrication materials.

ULTRASONIC BATH (SONICATOR)

ULTRASONIC BATH (SONICATOR)

Principle of Ultrasonic Cleaning :
Ultrasonics (Ultrasound) is the sound which human beings cannot hear. Ultrasound utilizes frequencies from and above 18khz (18,000 cycles per sound) High frequency electrical energy is converted into ultrasound waves by means of ultrasonic Transducers, which are bonded on the base of S. Cleaning Tank. These high frequency sound waves create in the liquid countless, Microscopic vacuum Bubbles which rapidly expand and collapse. This phenomenon is CAVITATION. These bubbles act like miniature high speed brushes, driving the liquid in to all openings and minute recesses of the Object immersed in the liquid. Intense scrubbing of Cavitation cleans away all the dirt and soil from the object immersed and the object is perfectly cleaned. Intricate objects can be cleaned with either complete or little Dismantling.

Applications :

Laboratory : For Glassware, Filter, Cleaning and HPLC Mobile, Phase Degassing
Industrial : Printed Circuit Boards, Semi-Conductors, Electronic Components, Precious Parts and Mechanisms
Medical : Dental and Surgical Instruments
Optical : Spectacles, Spectacle Frames, Lenses
Jewellery : For all kinds of Jewellery, Precious Stones etc.
To remove : Dust, Oils, Greases, Polishing Compound, Waxes, Swarf, Stains, Soils and any other Contaminants.


Silent Features :

  • Easy to operates & maintain with one piece S.S. Tank.
  • Indigenously manufactured with advanced MOSFET technology with Auto-tuning facility.
  • Digital Tuning of Transducers with Generators to avoid any frequency shifted even during demanding applications.
  • Compact, rugged and highly durable systems.
  • Extensively protected electronic circuits means longer and safer Operations.

Technical Specifications :

  • Operating frequency 33+-3KHz, for all general purpose cleaning is highly recommended
  • Input Voltage range of 170V AC- 270V AC, 50 Hz, 1 Ph.
  • Micro Controller based timer range 0 to 30/99 minutes.
  • Thermostatic controlled temperature controller.

*Other capacity other than mentioned are also available as per customer requirement.

MODELS AVAILABLE :

  • 1.0 Litre to 9 Litres
  • Heater Optional
  • Body S.S. or M.S. Powder Coated
Capacity

Tank size
(LxBxH)mm

Over all Dimension
(LxBxH)mm

Wattage
1.5 Lit. 240 x 135 x 65 265 x 160 x 180 60W
3.5 Lit. 300 x 150 x100 330 x 175 x 250 120W
6.5 Lit. 300 x 150 x150 450 x 200 x 350 200W
9 Lit. 300 x 200 x150 450 x 300 x 370 250W
UV- CURRENCY DETECTOR

UV- CURRENCY DETECTOR

U.V. Currency Detector is a boon for businessman, Bankers, Traders, Travel Agents, Post Offices, Railway and all other Institutions where a log of currency transactions take place.

This units has one U.V. Florescent tube which helps in detecting all colour & chemical faults in counterfeit currency, cheques / demand drafts / visas, Passports, I.D. Cards, Credit Cards, Traveller's Cheques etc. in an efficient and effective way. It also consists of one white tube giving day light effect in which all water marks and other discrepancies in the currency / cheque / drafts are easily detected. A magnified glass is provided for extra clearity enabling us to see all the defects clearly in the currency/cheques/drat. These defects are not visible to the naked eye.

U.V. Currency detector is an ultimate device in checking counterfeit currency, duplicate cheques and fake drafts. It is a compact well designed appliance which can easily be accommodated on an office table or can be kept hidden inside a bank counter. This instruments has a magnifying glass for proper magnification.

VACUUM PUMP

VACUUM PUMP

Rotary Vacuum Pump is of oil immersed rotary van type, where not only complete assembly i immersed in oil but shaft seal is also designed in such a way that it totally eliminates possibility of suction of air through it.

It is designed to achieve maximum vacuum in a very short time. It successfully checks the rise in temperature of the unit. It reduces the water and tear of its components and makes it suitable for noiseless and trouble free performance\ for years and thus helps in reduction of repair bills.

The main assembly of pump consists of a stator with a rotary mounted eccentrically. The rotor is fitted with two spring loaded diametrically opposed vanes, which move in and out of their slots, pressing against the inner surface of the stator. when the rotor revolves eccentrically these vanes sweep the air space, two times in a single revolution creating the vacuum. The main assembly is enclosed in a square box made from fine material capable of offering toughest resistance to corrosive intakes.

It is very compact but so simple in design that all repairs, in case of need, can be carried out easily without removing the main housing from its base plate and disturbing the alignment.

GUARANTEE: Though each pump is fully tested at various stage of its manufacturing but still it is guaranteed for full one year against any manufacturing defect.

ACCESSORIES: Like Belt guard, moisture trap, vacuum gauges, non-return valve, regulator, air ballast inlet dust filter, release valve etc. are available at extra cost, if required.

Available in following sizes:-

SINGLE STAGEDOUBLE STAGE
H..PDISPLACEMENT VACUUM VACUUM
0.25 50 Ltr/Min. 0.02 MM/Hg 0.005 MM/Hg.
0.33 75 Ltr/Min. 0.02 MM/Hg 0.005 MM/Hg
0.50 100 Ltr/Min. 0.02 MM/Hg 0.005 MM/Hg
0.75 150 Ltr/Min. 0.02 MM/Hg 0.005 MM/Hg.
1 300 Ltr/Min. 0.5 MM/Hg 0.005 MM/Hg
1.5 500 Ltr/Min. 0.05 MM/Hg 0.005 MM/Hg
2 800 Ltr/Min. 0.05 MM/Hg 0.005 MM/Hg.
3 1200 Ltr/Min. 0.5 MM/Hg 0.05 MM/Hg
4 1500 Ltr/Min. 0.5 MM/Hg 0.05 MM/Hg
5 2000 Ltr/Min. 1 MM/Hg 0.5 MM/Hg
7.5 3000 Ltr/Min. 1 MM/Hg 0.5 MM/Hg
10 5000 Ltr/Min 1 MM/Hg 0.5 MM/Hg
VORTEX MIXER

VORTEX MIXER

WITH TOUCH AND WITHOUT TOUCH FACILITY
WATER BATH (SEROLOGICAL)

WATER BATH (SEROLOGICAL)

Double walled outer casing made of M.S. sheet duly painted inner stainless steel 304 grade sheet. Temp. controlled by Hydraulic Thermostat from ambient to 95?C ? 0.5?C. The bath consist of 2 pilot lamps & on-off switch. To work on 220/230 volts A.C. Supply with ISI immersion heaters.
Size of Inside Stainless Steel Tank
a) 300x300x175mm (For 2 Racks)
b) 325x300x175mm (For 4 Racks)
c) 600x300x175mm (For 8 Racks)
WATER BATH (With Holes)

WATER BATH (With Holes)

Rectangular Single wall made of S.S. 304 grade (Stainless Steel) Heating elements has an Automatic Cut of Device. Complete with concentric rings to work on 220/230 volts A.C. supply.
WATER BATH HIGH PRECISION

WATER BATH HIGH PRECISION

Temperature range from ambient temperature to 100?C. Temperature controlled by digital Electronic Controller-cum-Indicator with a sensitivity of ? 0.1?C. Suitable for all laboratory applications requiring constant temperature with high degree accuracy. Double walled inside Stainless Steel and outside Mild steel sheet. A glass window is fixed on the front. Complete with stirrer, with speed regulator. Operates on 220/230 volts A.C. Supply.

Size Inside Chamber (Stainless Steel 304 Quality)
430 x 230 x 265mm 28 Liters

OPTIONAL:-

1) PID controller having two ramp & two soak profile can be fitted in above instruments at an extra cost of with sensitivity of ? 0.1?C

WATER BATH INCUBATOR SHAKER (Metabolic Shaking Incubator)

WATER BATH INCUBATOR SHAKER (Metabolic Shaking Incubator)

Temperature range from room temperature to 100?C. Thermostatic control with an accuracy of ? 0.5?C. Double walled inside made of stainless steel 304 Quality and outside Mild Steel sheet painted in epoxy powder coating. Oscillating tray is riding on ball rollers. Shaking speed range 40 to 140 rpm. Built-in L-shape thermometer. To work on 220/230 volts A.C. Supply. Without RPM Indicator.

SHAKING TRAY SIZE: INSIDE
(STAINLESS STEEL 304 QUALITY)

TI-1 275x275x75 mm.6 Ltrs.
TI-2 275x275x150mm. 12 Ltrs.
TI-3 405x300x150mm 18 Ltrs

Shaking Rack made of stainless steel for TI-1 & TI-2

To hold 16 Nos. 25ML Conical Flask
To hold 12 Nos. 50ML Conical Flask Conical Flask
To hold 9 Nos. 100ML Conical Flask Conical Flask
To hold 5 Nos. 250ML Conical Flask Conical Flask
To hold 4 Nos. 500ML Conical Flask Conical Flask
To hold 2 Nos. 1000ML Conical Flask Conical Flask
To hold 25 Nos. 25mm Conical Flask Conical Flask


Shaking Rack made of stainless steel for TI-3

To hold 20 Nos. 25ML Conical Flask
To hold 16 Nos. 50ML Conical Flask
To hold 12 Nos.100ML Conical Flask
To hold 9 Nos. 250ML Conical Flask
To hold 6 Nos. 500MLConical Flask
To hold4 Nos. 1000ML Conical Flask
To hold 35 Nos.25mm Conical Flask

OPTIONAL:-

1) Electronic Digital Temperature Controller cum Indicator.
2) PID Controller having two ramp & two soak profile can be fitted in above instruments at an extra cost.

WILLEY MILL

WILLEY MILL

INTERMEDIATE MODEL "ARTHUR THOMAS" TYPE

Electrically operated to work on 220 volts A.C Recommended for grinding of dry plant samples.
Also for a great variety of commercial dry materials. Unit having two stationary steel blades and rotary with steel edges provided in the cast iron chamber.
Willey mill is fitted on substantial cast iron base.

WORKING CHAMBER

(a) 40 mm x 20mm
(b) 65 mm x 25mm
(c)100 mm x 50mm

WRIST ACTION SHAKING MACHINE

WRIST ACTION SHAKING MACHINE

The shaking machine fitted with D.C. MOTOR to work on 220 VOLT A/C 50 CYCLES to work for longer period smoothly. Flasks mounted spindle to oscillate through a small amplitude sturdy eccentric mechanism provides effective mechanical shaking . The shaking machine constructed to hold 100 ml to 1000 ml. Conical flasks. The shaking speed action is controlled by ELECTRONIC regulator . 100 R.P.M TO 800 R.P.M approx HOLDING CAPACITY

(a) To hold 4 Flasks Cap. 100 ml. to 1000 ml. by side clamps

(b) To hold 8 Flasks Cap. 100 ml. to 1000 ml. by side clamps