Products
Categories
Sr. SECONDARY PHYSICS LAB KIT
Measuring Cylinder
Plastic transparent with in built base, 100 mL. graduation 1 mL As per sample.
Meter Bridge
Two part assembly with 0-50 cm scale one part and 50-100cm scale on other part.
Maximum lenght and width of each part should be 55 cm and 7.5 cm respectively.
As per sample
Mirror Strip with plastic piece
Mirror strip of size 100mm x 40mm x 2mm,
one plastic piece 25 x 25 x 15mm for holding the mirror strip As per sample
Multimeter
VDC;0-600V,VAC;0-600V,IDC;0-
200mA,10A hfe range resistance ;0-2 Mega ohm, diode range continuity range with
extra 10 fuses. As per sample
Optical bench assembly
Four pieces of scale of lenght 58cm with marking 0-50cm on one side and 50-100cm on other side,Scale width 25mm and thickness 8/10mm. End locking pins(2), strips for joining scales (2), sliding bases for uprights(4)sliding upright holder(4),mirror/lens holders(2), screen (10cm x 15cm)Lock for horizontal motion of
holders. As per sample
Pan
75mm dia, 10mm height with a provision for hanging As per sample
Peneils
Different colourned round pencils As per sample
Physical Weight Box
In the weight box 1mg. to 100g iron weights with forceps. As per sample
Pinch clip
As per sample
Pins
a.Drawing pins b. Allpin Both items packed
in plastic box. As per sample
Plane Glass plate
6cm x 6cm x 2mm As per sample
Plane mirror
80mm x 80mm x 3mm As per sample
Plane mirror strips with scale
300mm x 45mm x 2mm. mirror strip pasted
on wooden strip of same size (of thickness 10mm) with gratuation 0 to 240 mm for holding, there should be two rings and screws fitted on back side of wooden strip.
As per sample
Plastic Beaker(100mL&250mL )
Plastic 100mL and 250mL beakers with
gratuation 0 to 100 mL and 250mL. As per sample
Plastic Box
Polypropylene transparent milky white box, overall size 170 x 120 x 70mm height with
cover. As per sample
Plug Key
i)Brass, One way Key-03 ii) Brass two way key-01 As per sample
Plumb line (small size)
As per sample
PN junction diode
IN4007 As per sample
Polaroid
Two seperate pieces of Polarizer & analyzer
fixed on cardboard sheet of size 50 x50mm
As per sample
Potentiometer
10wires of 50cm each fixed on wooden
board with jockey 8mm tip size. As per sample
Prism
38 x 38mm,equilateral triangles As per
sample
Rechargeable battery with charge
Rechargeable battery 2V As per sample
Resistance box
ABS body Box size 138mm/140mm x
113/115mm height 45mm with five dials 0.1 Ω-1 Ω 1 Ω -10 Ω
10 Ω -100 Ω
Resonance Tube with attachment
Tube inner dia. 25mm,outer dia. 30mm and 600mm lenght with scale marking 0-60cm. Provision for a plastic pipe(of 1m lenght and 8mm dia) fitted with cork and plastic
reservoir 500mL. As per sample
Rheostat
1. 30Ω, , 2A ureka wire 27 No. base phylum
/plastic sheet 170 x 50mm thickness,6mm side support aluminimum/ABS plastic rider width copper contactor 34mm. 2. 200Ω, 1A ureka wire 34 No. base phylum/ plastic sheet 170 x 50mm thickness 6mm side support aluminimum/ ABS plastic rider width copper/ contactor 34mm. As per
sample
Rubber Pad
70mm x 50mm x 8mm As per sample
Sand paper and emery Paper
Sand paper 120 No. Emery paper 100 No.
As per sample
Screw Gauge
Moore and wright type, stainless steel
screw+ pivot ratchet stop Standard item and good quality in two sizes. One is 15 x 1/100mm. Another size 15 x 1/200mm.
Both screw gauges packed in single plastic
box. As per sample.
Set of resistors 5Ω (one no.), 10Ω (One no), 20Ω (Two nos),30 Ω (One no)
15mm x 15mm x 125mm with nichrome wire resistance, embedded in plastic case
with terminal As per sample
Set of Tuning forks
256Hz,288Hz,320Hz,384Hz, 480Hz,
512Hz,packed in a plastic box. As per sample
Solenoid coil with removable iron core
Coil with inner dia 20mm(core) with 400
turns of 26SWG enameled copper wire. Removable core of dia 16mm and lenght 75/80mm(iron or ferrite core) As per
sample
Solid Wooden Block for holding beam balance and syringe
100mm x 100mm x 60 mm. wooden blocks, cut a slot on one side for attachment of beam balance with a hole and back side counter, hole of syringe 30mm depth.
(20mm for nozzle approx.) As per sample
Sonometer
A box of 3mm plywood of size 635mm x
110mm x 105mm open at the bottom. Two circular holes of 30mm dia. along with gratuated scale in front.. At the top arrangement for fixing pulley and fly nut and
screw As per sample
Spherometer
Standard item good quality with 100 spanision on circular scale. Brass Body, stainless steel screw legs, diatance b/w
legs 32mm As per sample
Spirit Lamp
Steel body along with brass wick holder dia 65mm, height 50mm As per sample
Spirit level
Aluminimum body, square of approx. 16mm x 150mm lenght As per sample
Split Rubber Cork
12 no. & 7 no. As per sample
Steel Balls
Steel ball of dia. 1mm,2mm,3mm,4mm, packed in four different vials with size
stickers. As per sample.
Steel Roller
Dia 20mm and 75mm lenght roll with wire hook. As per sample.
Stopwatch with Split timeout
Digital stopwatch standard with least count
0.01 second. As per sample
Straw
As per sample
Syringe(60mL) with Plastic top
60mL Syringe,Standard item, syringe nozzle blocked with Plastic Cap. Plastic top of dia 75mm, thickness 6mm having both side counters(one side for weight supproting and another side to fit with syringe pump), gratuation marking from top to bottom 0 to 60mm and one rubber cap
for syringe support. As per sample.
Transistor
BC-547npn BC-557pnp BC-548 As per sample
Transparent glass plate
100mm x 100mm x 3mm
Tripod stand
Height 100mm, cast iron top 7 x7 x7cm triangle, legs dia 4mm, As per sample
Variable power supply
Regulated independent two power supply with rating 0 to 15V, 500mA. Inspanidual power switch. Case should include terminal ports for output, knob to vary voltage.
Provided in a box of size (60 x 90 x 90mm) with 1-1/2 m long wire, power cable joined
with two/ three pin plug As per sample
Vernier Caliper
(1) Standard item Medium size main scale 0-15 cm, in steel body. Least count 0.1mm. (wheel type) (2) Standard item Medium size main scale 0-15 cm in steel body. Least count 0.05mm (wheel type) Both packed in
single plastic/wooden box. As per sample
Watch Glass
Dia. 50mm.
Wire gauze
100mm x 100mm with frame As per sample
Wires(1) Brass (2) Steelwire (3) Nichrome
24 SWG. wire 3m lenght approx. As per sample.
