Products

Wooden Lab Products

ACOUATIC COLLECTION NET (D-SHAPED)

Strongly built for sweeping up of aquatic Fauna and useful as a general utility aquatic net. Net ring and handle can be separated for easy carriage. Stron~ V shaped ring frame dia 12" with stout handle.

Boyle's Law Apparatus

This low cost apparatus is great for demonstrating Boyle's law (elasticity of gases). A plastic syringe is mounted on a wooden base. A piston is mounted to a platform that holds various size weights, allowing students to plot pressure versus volume of gases in the cylinder. Dimensions: 9 x 6 x 2. Shipping weight: 1.0 Lb. Boyle's Law Apparatus

CHROMOTAGRAPHY CHAMBER

Glass panelled frame work is made out of teak wood frame finish with clear lacquer polish. The interior is wax coated to make it resistant to the most of the solvents. The lid is also glass paneled and is tightened with clamps and has sealing gaskets. Castor wheels have been provided for easy movements of the equipment. One acrylic tray has been provided for Chemicals. Complete with troughs and glass rods.

01 for 6 filter paper of 57 x 68 cm.
Size- 82 x 32 x75 cm. (33" x 13" x 30")
02 for 4 filter paper of 46 x 57 cm.
65 x 30 x 60 cm. (26" x 12" x 24")

CHRYSOPA REARING CAGE

frame work measuring 50x3Ox2O cm. (21xl3x7") fabricated out of seasoned. wood. The bottom and all sides are covered with fine mould Netlon mesh. One side has hinged window and the frame has been mounted with comb like grooves.The sliding top of the cage is made of ply wood which is covered black cloth from inside. Nicely polished.

COLLECTION TUBE STORAGE BOX

Box frame made of seasoned Teak wood with tongs & grooves type joints and top & bottom made of thick ply wood. Fittings like hinges, clips and index card frame made of brass. Suitable holes in thick NU-Wood to accommodate specimen tubes of size -11/2 " x 3/4" 150 nos. and 2 x 1/2" 200 nos.

COMPUTER PRINTER TABLE

Fabrication as in above model but Table Top provided with suitable slit for print - outs. Size - 67 x 55 x 75 cm. (27" x 22" x 30")

COMPUTER TABLE

Fabrication as in above model but meant for Computer work only.

Size - 67 x 55 x 75 cm. (27" x 22" x 30")

COMPUTER WORKSTATION

Compact unit suitable for all computer jobs i.e. for keeping, Monitor, UPC, Keyboard, Printer, stabilizer etc. Structure made of 1 " square iron in pipe and prelaminated particle boards with a unique key board tray

Size - 120 x 55 x 75 cm. (48" x 22" x 30")

DISPLAY BOARD (HANGING TYPE)

Soft pinning board mounted with green blazer, in white partal wooden frame light weight nicely lacquer polished wall hanging type.

1. Overall Size - 92 x 60 cm. (3" x 21/2")
2. 92 x 60 cm. (4" x 21/2")
3. 152 x 52 cm. (5" x 21/2")
4. 182 x 92 cm. (6" x 21/2")

DISPLAY BOARD (MOBILE TYPE)

Soft pinning board, white partal wooden with nicely lacquer polished framework, light weight mobile type easy to assemble with two square pipe stands.

1. OverallSize - 92 x 60 cm. (3" x 21/2")
2. 92 x 60 cm. (4" x 2Y2")
3. 152 x 52 cm. (5" x 21/2")
4. 182 x 92 cm. (6" x 21/2")

EGG LAYING CAGE

Frame made out of NU wood. Top & bottom wire mesh & one 30 mm hole fix with airtight wooden round stick on top corner. One side opeaable sliding sash. Well polished.

Size - 40x3Ox2O cms.

ENTOMOLOGICAL PIN STORAGE BLOCK

Made of wood with 6 holes to store different sizes of entomological pins and keep the same handy

FUME HOOD (mild STEEL)

Fabricated out.of thick c.r.c.a. sheet, double chamber, outer triple layer enamel painted and inner finished in apoxy & lined with compressed a asbestos sheet with strong blower exhaust system, light arrangement & counter balanced sliding sash. To work on 220 / 230V AC 50 Hz. Power plug with socket provided.

Size- Wdt. Dpt. Ht. Exhaust Duct No. 122

01 4' x 2.6'x 31/2' 3" dia
02 5' x 3' x 31/2' 4"
03 6' x 3' x 31/2' 4"

FUME HOOD (WOODEN)

Fume Exhaust hoods are designed to contain and exhaust toxic. Obnoxious or otherwise harmful gases, vapours, mist etc. to protect personnel and equipment. A motor driven blower created negative pressure within the chamber extracting the contaminated air from work area and expel it in to the atmosphere. The hood is ventilated of the air drawn for inside the laboratory which is used effectively for through sweep out of work chamber. Fabricated out of best quality thick weather resistant Duroboard clad in Mica Lamination from outside, Inner chamber finished in chemically-resistant Epoxy paint and work surface covered with glazed tiles and counter balanced slid ' ing Sash Fluorescent tubes are fitted inside. A gas tap and an electric plug is also provided to work on 220/230 V AC 50 Hz power plug.

A work bench/ Table (optional) to install the equipment any where in the lab can be supplied. The work bench is fabricated out of square steel pipe or hard wood and have a cupboard and a drawer.

FUMIGATION CHAMBER

Versatile chamber for fumigating for sterilization with insecticide for preservation clothes, plants, old books etc. Made of sturdy board, mica covered, Epoxy coated from inside with fume circulator of electric motor. Top cover tightened with clamps. One drawer is provided for keeping perti-dish for fumigants chemical. Castor wheel provided for easy movement.

01 Size- 90 x 60 x 80 cm.(36" x 24" x 32")
02 75 x 50 x 65 cm.(30" x 20" x 26")
03 50 x 40 x 55 cm.(24" x 16" x 22")

HEREBARIUM (PLANT) PRESS (HEAVY)

01 Heavy duty wooden planks finished in green

Duco paint. Brass chrome plated tightening screws and fly-nuts have been provided for strong and uniform pressure. An arrangement has been made that the fly-nuts need not be removed completely to lift the upper plank for keeping and removing planks as the same can be laboratory used.

02 HEREBARIUM (PLANT) PRESS (LIGHT)

The unit is very light and handy for field use. Made of reinforced wooden frame in green Duco paint. Surfficient and uniform pressure can be applied by means of strong belts provided on it.

Size - 45 x 30 cm. (18" x 12")

INOCULATION (U.V.TRANSFER) CHAMBER

Economical equipment for transfer of material/ tissue and to be used as dry-box and dust proof environmental enclosure. Made of thick board, covered with mica laminated inside Epoxy paint. Fluorescent tube light and U.V. tube inside with covered rectangular opening for transfer of material with two round holes for handling. Perspex sheet cover has been provided for viewing operations. Inside of chamber is painted with Epoxy paint.

01 Size 100 x 60 x 50 cm.(40" x 24" x 20")
02 70 x 50 x 40 cm.(27" x 20" x 16")

INSECT BREEDING NET / CAGE

Useful for breeding of insects in natural environments made with strong wire 5" dia 8" long mounted with synthetic netting. The ends of the netting can be tied on twig of tree or plant for natural atmosphere.

INSECT COLLECTION NET (DELUXE)

Strong wire ring dia- 12". Anodised aluminium handle fitted with hand grip. Heavy di-pressed clamp and fastening device is used for clamping the handle with the net- ring. Superior netting is used to make the netbag.

INSECT COLLECTION NET (SUPER DELUXE)

With telescopic folding handle, strong wire ring dia 12". Folding handle range 3 to 5 ft. including net ring. Heavy di-pressed clamps & fastening device is used for clamping the handle with the net ring. Superior netting is used to make the net bag. The unit is very useful for carrying the same to long distance collection areas and trap fast moving and more sensitive insects from a distance.

INSECT LIGHT TRAP (METALLIC)

01 Fabricated out of M.S. sheet with a box at the bottom for killing bottle & tray. Funnel measuring 30 x 5 cms. comes to the box size 40x 40x 25 cms. for convenient collection of trapped insects. Size of the tumbler is 25 x 40cms. It is provided with shaded bulb covering the complete area of the equipment & five meter long electric cord with bulb. The unit is finished in synthetic paint.

02 INSECT LIGHT TRAP
with 10 watt flourscent tube light.

03 INSECT LIGHT TRAP
with 15 waft U.V.Tube

INSECT SETTING SHOWCASE

Frame work fabricated seasoned teak wood joints are tongs and groove type glass frame lid and 3 mrn plywood bottom with tongs & grooves type joints. The inner side linned with EVA sheet suitable for repeated pinning without leaving pin marks. Double walled and perforated fumigation chamber has been provided on all sides of bottom frame for storing pesticide. All fittings like hings, clip, card frames are of brass finish with moisture proof clear lacquer.

01 Size - 60 x 45 x 7.5 cm. (24 x 18 x 31/2")
02 45 x 30 x 6.25 cm. (18 x 12 x 21/2")

INSECT SPLIT CAGE

Wooden frame 60 cm. (24") high & 45 cm. (18') roundThree fourth portion of the cage is covered with black Tusser cloth and one fourth is provided with glass for easy viewing of the plant and insect activity. Inside of the unit is painted black colour

INSECT SPREADING BOARD

Made of seasoned wood which is covered with non-scaring, washable, synthetic 6 or 8 mm EVA sheet suitable for repeated pinning without leaving pin marks. Groove smoothly adjustable in width for various sizes of abdomen of various insects upto 12 mm. Die-pressed brass fittings duly chrome plated.

INSECT SPREADING BOARD BOX

Utility forfield where the insects can be stretched on the spot and can be securely kept inside. The box made of light weight white wood with tongs & grooves type joints. The top & bottom lined with 6 mm EVA sheet over which adjustable strips for stretching insects. The scripts can be fixed at one place with screw and fly uts, Folding hingis provided for separation of top & bottom. Index card frame clips & flexible handle are also provided.

LAMINAR AIR FLOW (BIO SAFETY) . STAINLESS STEEL

Ultra Clean AirWork Station, Vertical type, made of sturdy board, all sides covered with Mica, Work stage thoroughly lined with Stainless Steel (S.S. -304 or 316) with illumination by fluorescent tube lights. The unit is complete with H.E. P.A. filtered clean exhaust duct. Efficiency u to 99.97%, retaining particles up to the size oF0.03 micron. To work on 220 / 230V AC 50 Hz.

LAMINAR AIR FLOW (BIO-SAFETY CABINET)

Ultra Clean Air Work Station, Vertical type, made of Pest & weather resistant board which is clad in laminated sheet Work stage thoroughly lined with Stainless Steel (S.S. - 304 or 316) with illumination by fluorescent tube lights. The unit is complete with H.E.RA. filtered clean exhaust duct. Efficiency up to 99.97%, retaining particles up to the size of 0.03 micron. To work on 220 230 V AC 50 Hz.

LAMINAR AIR FLOW (HORIZONTAL) STAINLESS STEEL (SS-316)

The equipment is fabricated made from rectangular/square pipe than fix with water proof thick board covered with mica. Environmental air is drawn by a balanced blower through prefilters retaining more than 85% of particles and is thrown to work chamber through high efficiency HEPA filters retaining particulate and Biological contaminants larger than. 0.3 microns. Table top is covered with stainless steel (SS-316) sheet. Front door is folding type & Side panel are fixed and made of clear thick plexi glass sheet. Including U.V. Tube, Fluorescent tube light, gas cock & manometer. To work on 220/230 V AC 50Hz.

Laminar Air Flow (vertical)

LAMINAR AIR FLOW (VERTICAL) STAINLESS STEEL

Same as Horizontal model, but the air drawn vertically on the Work stage, An Exhaust system can be provided (Optional) at the bottom of the Unit to throw the air outside the Work. place.

LAMINAR AIR FLOW MODULE (HORIZONTAL)

The Equipment is fabricated out of reinforced pest and weather resistant Board which is clad in white mica laminated sheet. Environmental air is drawn by a balanced blower through prefilters and is thrown to work chamber through high efficiency HEPA filter retaining particulate and Biological contaminants larger than 0.3 microns. Table top is covered with stainless steel/ mica sheet.The side panels & front door is made of thick clear imported plexy glass sheet including U.V. Tube FluorescentTube Light, Gas Cock and manometer, C.R fiting complete. To work on 220/230 V AC 50 HZ.

LAMINAR AIR FLOW MODULE (VERTICAL)

Same as Horizontal model, but the air drawn vertically on the Work stage, An Exhaust system can be provided (optional) at the bottom of the Unit to throw the air outside the Work place.

LITERATURE REPRINT PAPER BOX

Made of light weight white partial wood, with clamps to hold reprints / paper in position. Nicely polished.

Size - 37.5 x 25 x 7 cm. (15" x 10" x 21/2")

MAGNETIC BOARD

White enamelled / coated m.s. sheet, in anodized aluminium frame light weight, wall Cabinet made of thick board covered with mica hanging type.

01 Overall Size - 92 x 62 cm. (3" x 2")
02 122 x 77 cm. (4" x 2")
03 152 x 92 cm. (5" x 2")
04 182 x 92 cm. (6" x 2")

MICROSCOPE / INSTRUMENT COVER (PERSPEX)

Made of transparent 3 mm imported parspex sheet with mica cover base, suitable for Binocular microscope.

01 Size - 27.5,x 13.5 x 42 cm. (11 " x 9" x 17")
02 suitable for Trinocular or Stereo Microscope

Size - 30 x 20 x 45 cm. (12" x 10" x 18")

MUSEUM SPECIMEN JAR (PERSPEX)

Fabricated out of transparent Imported Perspex sheet with fit-in type cover. The joints are chemically welded to make it perfectly leak-proof. The imported sheet is non-corrosive to almost all animal and plant preservatives.

Sizes

5"x5"x8"
6"x4"x8"
7"x4"x9"
7"x5"x10"
8"x5"x10"
8"x5"x12"
8"x5"x14"

PHOTOPERIODIC SIMULATION /TISSUE CULTURE RACK

Fabricated out of 1x1x12mm wall thickness square M.S. pipe fitted with sturdy castorwheel for smooth shifting movement of the unit. Shelves are made of 'Hylem' sheet area frosted glass. Each shelves has been provided with four fluorescent tubes of 4'size.The unit is workable on 220V AC 50Hz single face. Heavy duty copper chokes have been mounted on a separate connection board with wall hanging arrangement.

Ht. 152 x Shelf Length 127 x Shelf width 61 cm. (60" x 50" x 24")

PROJECTION SLIDE BOX

(for 35mm film slides) Frame fabricated out of Teak wood with tongs & grooves type joints .50 x 50 mm plastic or card cover in vertical position wooden groovds serially numbered are fitted on cushioned bottom. Inner side of the lid is pasted with index sheet. All fittings like hinges and clips are made of brass. Nicely polished.

01 Capacity 200 slides
02 100 slides
03 50 slides
04 25 slides

PROJECTION SLIDE CABINET

(for 35mm film slides). Cabinet made out of thick board clad in Mica Lamination. Lockable door, Drawers to hold 50 x 50 mm Plastic or card cover projection slides in wooden grooves serially numbered. Drawers made ofTeak wood well polished. An extra drawer is provided to keep Index Card sheet etc.

PROJECTION SLIDE SORTER

(for 35 mm film slides)This rack type equipment has been designed to facilitate to quickly identify and sort projection slides. An adjustable magnifier has been provided with ledges to hold 35 slides at a time, is illuminated from within the chamber by a fluorescent tube.

REFERENCE CARD CABINET

Cabinet made of thick board covered with mica hanging type. lamination. Drawer frame seasoned wood front mica laminated joints with tongs & groove type, chrome plated rods in the drawer and through it moves a metal plate which can be fixed at any desired position. Drawer fitted with puller knob & index card holder the drawers can be fixed at ant desired position. Drawer fitted with puller knob & index card holder the drawers can be pulled out by disengaging locking lever.

SLIDE BOX (DELUXE)

For 75x25 mm Slides Made of seasoned Teak wood frame joints are tongs and grooves type. Very nice plastic grooves are serially numbered. Mica covered hinged top lined with printed index sheet & velvet bottom fitted with brass clip. Finished with clear Lacquer polish.

01 100 slides
02 150 slides

SLIDE BOX (UNIQUE) ABS PLASTIC

For keeping 75 x 25 mm glass slides in vertical position in serially numbered grooves, ABC plastic moulded box. Removable top with printed index sheet. Very nice look.

SLIDE CABINET (BI PURPOSE)

Combination of slide storage in flat as well as in vertical position. Cabinet is fabricated out of thick board clad in mica lamination sheet. Lockable door. One half of the cabinet holds anodized. aluminium trays for 20 slides each in flat position and the other half carries drawers to hold slides in vertical position in serially numbered wooden grooves. An extra drawer for keeping index sheets. Finish with clear lacquer.

01 (500 Flat+ 500 Vertical) Cap. - 1000 slides
02 (600 +1000 1600 slides
03 (800 +1200 2000 slides

SLIDE CABINET HORIZONTAL (FLAT POSITION)

For 75x25 mm slides in aluminium trays. Body fabricated out of thick board which is clad in mica lamination sheet. Lockable door is disappearing type. Thickly anodized aluminium trays cap. 20 slides each. An extra drawer is provided to keeping index sheets etc.

SLIDE HOLDER

Thick anodized aluminium sheet, die cut to carry 4 slides.

SLIDE STAINING RACK (WOODEN)

Wooden, suitable for dropping bottles of different sizes, provided with slide rack grooves & other Instruments keeping space.

01 to hold 125ml. bottles/staining tubes
02 60 mi.
03 30 mi.

SLIDE TRAY (WOODEN) FILE TYPE

File type tray with hinged cover flap. It can carry 20 slides in flat position in 20 compartments which are serially numbered. Best for carrying prepared slides to the class or field.

SLIDE TRAY(ALUMINIUM)

Made out of 20 cm SWG aluminium sheet by dia-press system and is richly anodised. for 20 slides of 75x25 mm in flat position.

TABLE DESK - CUM -TRACER

Designed for prolonged work and tracing job provided with removable shaded tube light and a tube light below the frosted glass for tracing work. Finished with mica covered and inside painted.

Size- 67 x 45 x 11.5 / 2.5 cm.