Products
Categories
Chemistry Education Appliances
Potassium sulphate (low in nitrogen content) (Suitable for protein estimation)
Potassium sulphate (low in nitrogen content) (Suitable for protein estimation) Packing - PB Qty - 500 Unit - g
Potassium sulphate A.R.
Potassium sulphate A.R. Packing - PB Qty - 500 Unit - g
Potassium thiocyanate
Potassium thiocyanate Packing - PB Qty - 500 Unit - g
POWER SUPPLY, 3V DC
A simple, economical, power supply providing fixed output of 3V at 1 A.
Useful for low voltage experiments at moderately high current ratings
such as in electromagnetism. Sturdy sheet metal casing with toggle type ON/OFF switch and indicator lamp on front panel. Output available through a pair of colour coded 4mm socket terminals. Supplied with 2-core mains flexible lead.
POWER SUPPLY, AC / DC, 0-13V
The unit provides AC and DC voltages in 1 V steps up to 13\1. The AC is full wave rectified to give the DC equivalent. AC available through a pair of yellow 4mm shielded sockets, whereas DC through a pair of colour coded sockets. Protection against electrical overload or short circuit is provided by a thermal circuit breaker. When the rated current is exceeded, the circuit breaker opens and an audio signal is emitted. On removal of overload condition, the audio signal stops and power is returned within one minute. Rotary voltage selectors on the front panel determine the AC and equivalent DC voltage output. Complete unit housed in a sturdy sheet metal casing. With indicator type ON/OFF switch. Mains Input 220-240V AC, 50Hz, Voltage Output AG - O to 13V (nominal) in 1 V steps; DC - full wave Rectified equivalent of selected AC voltage, Current Output Primary Maximum 5A, Protection Secondary 2A time delay fuse, Protection : Thermal circuit breaker, self re-settable.
POWER SUPPLY, AC / DC, CONTINUOUS VARIABLE, WITH AMMETER / VOLTMETER
Similar to POWER SUPPLY, AC / DC, LOW VOLTAGE, CONTINUOUS VARIABLE but with additional AC/DC moving coil ammeter to indicate load current and overload trip protection having reset press switch on the front panel. With indicator type ON/OFF switch. Designed for continuous use. Supplied with detachable mains lead.
POWER SUPPLY, AC / DC, CONTINUOUSLY VARIABLE, 0-25V, WITH DIGITAL DISPLAY
The unit provides continuously variable AC output from 0-25V through a heavy duty step down variable transformer and equivalent DC output through bridge rectifier, at a maximum of 5A current. AC output can be had from a pair of yellow 4mm socket terminals, while DC from a pair of colourcoded socket terminals. The output voltage can be varied through a rotary knob on the front panel and can be read on 4 digit, 7 segment bright red LEO display with a toggle switch to select AC or DC measurement. Both input and output protected through slow blow fuse. The complete unit housed in a specially designed two part aluminium extrusion with insulated plastics side supports for safety. With indicator type ON/OFF switch. Designed for continuous use. Supplied with detachable mains lead.
POWER SUPPLY, AC / DC, LOW VOLTAGE, CONTINUOUS VARIABLE
The unit provides continuously variable AC output from 0-25V through a heavy duty step down transformer and equivalent DC output through bridge rectifier, at a maximum of 5A current. AC output can be had from a pair of black 4mm socket terminals, while DC from a pair of colour-coded socket terminals. The output voltage can be varied using a dimmerstat through a rotary knob on the front panel and can be read through an AC/DC moving coil voltmeter with a toggle switch to select AC or DC measurement. 80th input and output protected through slow blow fuse. Complete unit housed in a sturdy sheet metal casing. With ON/OFF switch and indicator light. Designed for continuous use. Supplied with detachable mains lead.
POWER SUPPLY, AC/DC, 1.5-12V, STEPPED
A simple and economical low voltage AC / DC power supply providing multiple tapped outputs of 1.5, 3, 4.5, 6,9 and 12V, both the outputs available from the respective pairs of 4mm socket terminals marked clearly for output type. A small lead terminating in 4mm banana plug projects outside from the front panel and can be plugged on any of the 4mm sockets, clearly marked provided on the panel for selecting the desired output. Housed in sturdy, well painted, sheet metal case. Full wave bridge rectifiers, double wound transformers with good-quality enameled copper wire and highgrade laminations minimize losses while ensure continuous trouble-free operation over prolonged use. With toggle type ON/OFF switch and indicator. Input fused for circuit protection. Operates on 220-240V AC, 50/60Hz.
POWER SUPPLY, AC/DC, LOW VOLTAGE, STEPPED
Stepped Output Voltage in steps at 2A maximum current selectable through a positive click stop rotary knob. With indicator type ON/OFF switch. Input fused for circuit protection. Operates on 220-240V AC, 50/60Hz. Supplied complete with 2-core mains flexible lead.
POWER SUPPLY, DC, 1.5-12V, STEPPED
This completely IC regulated power supply unit provides 11 fixed DC voltage outputs available at 2A current rating through a pair of colour coded 4mm shrouded sockets and selectable through a rotary knob with positive click stops. Input fused protected. Output is overload and short circuit protected. The complete unit housed in a specially designed two part aluminium extrusion with insulated plastics side supports for safety. The front panel has an additional 4mm socket for earthing and indicator type ON/OFF switch. Designed for continuous use.
Input 230V ? 10% AC, 47 -53Hz, Voltage Output 1.5,2,3,4,4.5,5,6,8, 9, l0 and 12VDC, Current Output : Maximum 2A, Stabilization : 0.5%, Ripple : 5mV
Supplied complete with detachable mains cord.
POWER SUPPLY, DC, PROGRAMMABLE
Highly sophisticated instrument with facility to be interfaced with PC ~ ability to work as standalone unit. It has menu driven front panel with numerical/rotary switches that makes it user friendly with unique feature to store up to 10 settings. Unit can be set to give constant voltage, constant current, constant power with low ripple and high resolution. Fully protected against over / under voltage and current, with excellent line and load regulation. The voltage, current, power and output status (ON/OFF) are displayed on backlit LCD screen. Main features include - Excellent Load/Line regulation. Constant voltage, Constant current, constant power mode operation. Can set max voltage current & power output · LCD display with backlight. Digital plus rotary switches. 10 memory locations. RS-232 interface for PC controlled operations. Compact and truly portable.
TECHNICAL SPECIFICATIONS :
Output : Single, Output Voltage : 0- 36V 0-3A, Constant Current : 1mV at 0-3.999V; 10mVat 4-36V, Current Resolution : ≤1mA, Line Regulation for Voltage - 0-3.999V - 0.01%+3mV, 4-36V, 0.02%+10mV, Line Regulation for Current : 0.02%+10mA, Load Regulation for Voltage :0.02%+20mV, Load Regulation for Current : 0.02%10mA, Ripple : V rms ≤ 2mV rms, Reaction time of the Output Program Set - Up 50/90% 10ms, Down : 90/50% 30ms, Memory : 10 point EEPROM, Protective Mode : over voltage / over current/ over power, Mains Input : 220V ± 10% 50Hz, Operating Environment : 0- 500C, 8O%RH, Accessories Included : Users Manual, Mains Cord, Optional Accessories : Communication cable for RS232 and software.
TECHNICAL SPECIFICATIONS :
Output : Single, Output Voltage : 0- 36V 0-3A, Constant Current : 1mV at 0-3.999V; 10mVat 4-36V, Current Resolution : ≤1mA, Line Regulation for Voltage - 0-3.999V - 0.01%+3mV, 4-36V, 0.02%+10mV, Line Regulation for Current : 0.02%+10mA, Load Regulation for Voltage :0.02%+20mV, Load Regulation for Current : 0.02%10mA, Ripple : V rms ≤ 2mV rms, Reaction time of the Output Program Set - Up 50/90% 10ms, Down : 90/50% 30ms, Memory : 10 point EEPROM, Protective Mode : over voltage / over current/ over power, Mains Input : 220V ± 10% 50Hz, Operating Environment : 0- 500C, 8O%RH, Accessories Included : Users Manual, Mains Cord, Optional Accessories : Communication cable for RS232 and software.
POWER SUPPLY, DC, REGULATED, ?15V, 1A
A universal DC power supply with continuously adjustable output from 0 to ? 15V at 1 A current rating, obtainable through a set of three colour coded 4mm shielded sockets and can be varied using the voltage control knob provided on the front panel. Negative voltage with respect to zero through green socket can be had from black socket marked '-', while positive voltage can be had from red socket marked '+'. A 4 digit, 7 segment bright red LEO display shows the voltage reading at any instant. The power supply also provides a fix 5V DC output at 1 A through another pair of 4mm colour coded sockets. Input fused protected. Output is overload and short circuit protected. The complete unit housed in a specially designed two part aluminium extrusion with insulated plastics side supports for safety. The front panel has an additional 4mm socket for earthing and indicator type ON/OFF switch. Designed for continuous use. Input : 230V ? 10% AC, 47 -53Hz, Output : 0-15V DC, continuously variable, and 5V DC fixed, Current Output : Maximum 1A, Stabilization : 0.5%, Ripple : 5mV, Supplied complete with detachable mains cord.
POWER SUPPLY, EHT, 0-5kV DC
This is a specially designed universal floating high voltage power source useful for supplying charge for quantitative electrostatic experiments and also for gas discharge tubes needing a filament supply, or even spectrum tubes. Provides a continuously variable output up to 5kV by a transformer having specially insulated windings to withstand EHT voltages. The fully floating EHT circuit is particularly useful for discharge tube experiments so that the positive or negative terminal may be safely connected to earth and / or one side of the filament. The transformer is tapped directly to provide 6V/1A AC or 12V/0. 5A AC filament heating supply, which is also insulated for EHT voltages. A rotary control knob provided on the front panel adjusts the EHT output from 0 to 5000V DC with a non-hazardous maximum load capacity of 3mA [short circuit current) which can be read directly from an analog moving coil meter. All outputs available through 4mm shielded sockets and are clearly marked for their respective outputs. Both input and output fuse protected. The complete unit housed in a specially designed two part aluminium extrusion with insulated plastics side supports for safety. With indicator type ON/OFF switch. Supplied complete with detachable mains lead. Operates on 220-240V AC, 50Hz.
POWER SUPPLY, EHT, 0-5kV DC, SHEET METAL CASING
Technically similar to Cat No. 2040360, but complete unit housed in a robust, sheet metal case fitted with lifting handles at the front. Low voltage AC outputs are available from 4mm socket terminals whereas, EHT output available from 4mm shielded sockets, all properly insulated for EHT output. Simular to POWER SUPPLY, EHT, 0-5kV DC.
POWER SUPPLY, MULTIPLE
TECHNICAL SPECIFICATIONS
DC Output : A: 0-30V, 1A, continuously variable by means of coarse & fine controls B: 5V, 1A Adjustable from 4-6V C: 0-?15V. 1A. continuously adjustable, Current Limit : 20mA ?15V 1A continuously adjustable, Resolution : Voltage - 10mV; Current - 2mA, Internal Resistance ≤15m , Stability - ≤2.5mV at 30V/1A, 5V/1A, ? 15V/1A, Recovery Time - ≤80s, Load Regulation - ≤0.05%, Temp Coefficient - ≤0.05%, Ripple & Noise - ≤1mV rms, Display - . 3 digit for voltage & 3% digit for current LED indication for voltage & current, Accuracy - ?(1 %+1digit), General Information - All outputs are floating. & switchable from front panel. Built-in overheat. over voltage and short-circuit protection, Insulation - Between chassis & output terminals > 10M at 100V DC. Between chassis & AC plug> 50M at 500V DC, Power Input Operating - 220V ? 10%. 50Hz/60Hz , Conditions - 0-40?C. 95% RH.
POWER SUPPLY, OUAL, 30V/2A, WITH AUTOMATIC OVERLOAD PROTECTION
TECHNICAL SPECIFICATIONS
DC Output : 2x0-30V, 1A, continuously variable by means of coarse & fine controls, Current Limit : 100mA-2A continuously adjustable for 0-30V & 5V) 100mA - 1A continuously adjustable for ?5V, Resolution : Voltage - 10mV; Current - 2mA, Internal Resistance ≤15m , Stability - 2.5mV at 30V/2A, Recovery Time - ≤ 50s, Load Regulation - ≤ 0.05% ? 10mV, Line Regulation - ≤ 0.05% ? 10mV, Temp Coefficient - ≤0.05% + 5mV/?C, Ripple & Noise - ≤1mV rms, Display - . 3 digit for voltage & 3 digit for current, LED indication for voltage & current, Accuracy - ?(1%+1digit), General Information - Both outputs are floating. Built-in overheat. over voltage and short circuit protection, Insulation - Between chassis & output terminals > 10M at 100V DC. Between chassis & AC plug > 50M at 500V DC, Power Input 220V ? 10%. 50Hz/60Hz, Operating - Conditions - 0-40?C. 95% RH.
DC Output : 2x0-30V, 1A, continuously variable by means of coarse & fine controls, Current Limit : 100mA-2A continuously adjustable for 0-30V & 5V) 100mA - 1A continuously adjustable for ?5V, Resolution : Voltage - 10mV; Current - 2mA, Internal Resistance ≤15m , Stability - 2.5mV at 30V/2A, Recovery Time - ≤ 50s, Load Regulation - ≤ 0.05% ? 10mV, Line Regulation - ≤ 0.05% ? 10mV, Temp Coefficient - ≤0.05% + 5mV/?C, Ripple & Noise - ≤1mV rms, Display - . 3 digit for voltage & 3 digit for current, LED indication for voltage & current, Accuracy - ?(1%+1digit), General Information - Both outputs are floating. Built-in overheat. over voltage and short circuit protection, Insulation - Between chassis & output terminals > 10M at 100V DC. Between chassis & AC plug > 50M at 500V DC, Power Input 220V ? 10%. 50Hz/60Hz, Operating - Conditions - 0-40?C. 95% RH.
POWER SUPPLY, TRIPLE
TECHNICAL SPECIFICATIONS
DC Output : 2 x 0-30V, 500mA, continuously variable by means of coarse and fine controls 1 x 5V fixed 1A, Current Limit : 10mA-500mA continuously adjustable for 0-30V, Resolution : <0.1%, Internal Resistance ≤15m for 0-30V, ≤0.06 for 5V, Stability ≤2.5mV (Max 2x200mA) at line voltage variations of up to 10% at 30V/0.5A ≤0.5mV at line voltage variables of up to 10% at 5V/1A. Recovery Time - 80s at 0-30V/0.5A; 100s at 5V/1A, Load Regulation - 0.05%, Line Regulation - 0.05%, Temp Coefficient 0.1%/?C, Ripple & Noise - 1 mV~(0-30V/0.5A); 5mV~ (5V/1A), Tolerance - ?0.2V for (5V), Display - 2 x 3 digit, 7 segment LED display for voltage & current. Separate LEDs (for V & mA)l indicate the unit of display, Accuracy - ?(1% + 1digit), Over Range Indicator - Glowing of LEDs indicate overload, General Information - All outputs are floating & switchable from front panel. Built-in overheat protection. Insulation - Between chassis & output terminals >10M at 100V DC. Between Chasis and AC Plug > 50M at 500V D.C., Power Input Operating - 220V ? 10%, 50Hz/60Hz, Conditions - 0-40?C, 95% RH.
DC Output : 2 x 0-30V, 500mA, continuously variable by means of coarse and fine controls 1 x 5V fixed 1A, Current Limit : 10mA-500mA continuously adjustable for 0-30V, Resolution : <0.1%, Internal Resistance ≤15m for 0-30V, ≤0.06 for 5V, Stability ≤2.5mV (Max 2x200mA) at line voltage variations of up to 10% at 30V/0.5A ≤0.5mV at line voltage variables of up to 10% at 5V/1A. Recovery Time - 80s at 0-30V/0.5A; 100s at 5V/1A, Load Regulation - 0.05%, Line Regulation - 0.05%, Temp Coefficient 0.1%/?C, Ripple & Noise - 1 mV~(0-30V/0.5A); 5mV~ (5V/1A), Tolerance - ?0.2V for (5V), Display - 2 x 3 digit, 7 segment LED display for voltage & current. Separate LEDs (for V & mA)l indicate the unit of display, Accuracy - ?(1% + 1digit), Over Range Indicator - Glowing of LEDs indicate overload, General Information - All outputs are floating & switchable from front panel. Built-in overheat protection. Insulation - Between chassis & output terminals >10M at 100V DC. Between Chasis and AC Plug > 50M at 500V D.C., Power Input Operating - 220V ? 10%, 50Hz/60Hz, Conditions - 0-40?C, 95% RH.
POWER SUPPLY, TRIPLE OUTPUT, DC
It is a high performance, fully solid-state, triple output DC power supply, particularly suitable for wide range of industrial and laboratory use involving experimental set-ups and circuit development applications. The two main outputs are continuously variable from 0-32V DC at a maximum of 3A, available through 2 sets of 4mm colour coded terminals, one towards the left and other towards the right of front panel. The variable output sections can be operated in constant voltage or constant current modes, with the unit automatically interchanging between the two modes, which are indicated by separate indicator LEOs. The front panel Voltage and Current control knobs provides for adjustment in output voltage and current respectively. The front panel also has separate 3 digit LED display for each variable section to monitor output voltage or load current, selectable through meter (V / AJ selection switch. The unit also provides a fixed 5V DC output with adjustment facility from 4.5 to 5.5V with a maximum current of 3A along with overload indication. All the outputs are floating, i. e., neither the output positive terminal nor the negative terminal (nor any point within the ,circuitry] is connected to ground. Designed for continuous use. TECHNICAL SPECIFICATIONS
Variable voltage Sections (2 Identical sections) - Output Voltage 0-32V DC, continuously variable
Output Current 0-3A maximum, continuously variable Constant Voltage Mode Operation Line Regulation ?0.01% + 2mV for ? 1 0% line Load Regulation ?0.01% + 2mVfor ? 1 0% load change Ripple & Noise 1 mV _ maximum Constant Current Mode Operation Line Regulation ?0.1% + 250?A for ? 10% line
Load Regulation ? 0.1% + 250?A for change in output voltage from O to maximum. 5V Section - Output Voltage 4.5 - 5. 5V DC with adjustment on front panel, Output Current : 3A maximum with overload indication, Line Regulation : Less than 10mV, Load Regulation : Less than 10mV, Ripple and Noise : 2mV, maximum Load Regulation.
Output Current 0-3A maximum, continuously variable Constant Voltage Mode Operation Line Regulation ?0.01% + 2mV for ? 1 0% line Load Regulation ?0.01% + 2mVfor ? 1 0% load change Ripple & Noise 1 mV _ maximum Constant Current Mode Operation Line Regulation ?0.1% + 250?A for ? 10% line
Load Regulation ? 0.1% + 250?A for change in output voltage from O to maximum. 5V Section - Output Voltage 4.5 - 5. 5V DC with adjustment on front panel, Output Current : 3A maximum with overload indication, Line Regulation : Less than 10mV, Load Regulation : Less than 10mV, Ripple and Noise : 2mV, maximum Load Regulation.
PRESSURE COOKER
Large domestic type pressure cooker made of lightweight, polished aluminium alloy with safety valve. Reinforced heatresistant handles, with emergency safety valve, which releases the steam in case of any blockage in the main valve blocked. Capacity about 5L. Inner dimensions are 150x210mm (height x diameter) approx.
PROJECTION SCREEN, DELUXE
The screen incorporates roll back spring action. Consists of a high reflectance, durable, rollable & projection screen encased in a sheet metal box casing with provision for hanging on walls, flat vertical surfaces or suitable tripod stand. When released after use, the spring loaded mechanism automatically winds the projection screen inside the casing, which can be easily pulled out any time for use. It can be used for black and white as well as colour projection.
Available in various sizes.
PROJECTION SCREEN, DELUXE - Size 90 x 120cm
PROJECTION SCREEN, DELUXE - Size 100 x 100cm
PROJECTION SCREEN, DELUXE - Size 130 x 175cm
PROJECTION SCREEN, DELUXE - Size 150 x 150cm
PROJECTION SCREEN, DELUXE - Size 180 x 240cm
PROJECTION SCREEN, DELUXE - Size 240 x 300cm
PROJECTION SCREEN, DELUXE - Size 270 x 360cm
PROJECTION SCREEN, DELUXE - Tripod Stand foldable, metal with 4 position vertical adjustment; for mounting projection screens.
PROJECTION SCREEN, SIMPLE
A simple and economical projection screen, ideal for use in educational institutions or conferences, where the screen can not be installed permanently. Equipped with provision at the top for suspension on walls or flat vertical surfaces. The screen has a markable surface and has roller on either side for rolling after use, just like maps and charts. Supplied in plastic bag.
Available in various sizes.
PROJECTION SCREEN, SIMPLE - Size 90 x 120cm
PROJECTION SCREEN, SIMPLE - Size 100 x 100cm
PROJECTION SCREEN, SIMPLE - Size 130 x 175cm
PROJECTION SCREEN, SIMPLE - Size 150 x 150cm
PROJECTION SCREEN, SIMPLE - Size 180 x 240cm
PROJECTION SCREEN, SIMPLE - Size 240 x 300cm
PROJECTION SCREEN, SIMPLE - Size 270 x 360cm
Propan -2- ol
Propan -2- ol Packing - PB Qty - 2.5 Unit - L
Propan-1-ol (n-propyl alcohol)
Propan-1-ol (n-propyl alcohol) Packing - PB Qty - 500 Unit - mL
Propan-2-ol (Electronic garde) (Isopropyl alcohol)
Propan-2-ol (Electronic garde) (Isopropyl alcohol) Packing - GB Qty - 2.5 Unit - L
Propan-2-ol (Isopropyl alcohol)
Propan-2-ol (Isopropyl alcohol) Packing - PB Qty - 500 Unit - mL
Propan-2-ol A.R.
Propan-2-ol A.R. Packing - GB Qty - 2.5 Unit - L
Propan-2-ol A.R. (Isopropyl alcohol)
Propan-2-ol A.R. (Isopropyl alcohol) Packing - GB Qty - 500 Unit - mL
Propan-2-ol HPLC
Propan-2-ol HPLC Packing - GB Qty - 2.5 Unit - L
Propan-2-ol HPLC (Isoproyl alcohol)
Propan-2-ol HPLC (Isoproyl alcohol) Packing - GB Qty - 1 Unit - L
Propylene glycol
Propylene glycol Packing - PB Qty - 500 Unit - mL
PROTRACTORS
Big sized, designed for use by students. Useful for reading, marking and measuring angles in degrees. Clear black marking provides easy reading. The protractors are provided with rotatable slider that rotates about the center of protractor for precise marking of the angles and also facilitates angle measurements. Circular scale is calibrated 0-180?x 1? both clockwise as well as anticlockwise, i. e., reading in both directions - forward as well as reverse. Made of aluminium
& Made of Brass, superior quality.
Pyridine
Pyridine Packing - GB Qty - 250 Unit - mL
Pyrogallol (pyrogallic acid)
Pyrogallol (pyrogallic acid) Packing - GB Qty - 100 Unit - g
Pyrogallol (Pyrogallicacid)
Pyrogallol (Pyrogallicacid) Packing - GB Qty - 100 Unit - g
R.B.C. diluting fluid (Hayem's)
R.B.C. diluting fluid (Hayem's) Packing - PB Qty - 125 Unit - mL
R.B.C. diluting fluid (Hayem's)
R.B.C. diluting fluid (Hayem's) Packing - PB Qty - 500 Unit - mL
RC5168 Condenser, Allihn
Borosilicate glass. Inner tube consisting of bulb
sections.
Effective Length
| -01 | 200mm |
| -02 | 300mm |
| -03 | 400mm |
| -04 | 500mm |
RC5170 Extractor, Soxhlet Apparatus
Borosilicate glass.
Capacity
| -01 | 20ml |
| -02 | 40ml |
| -03 | 60ml |
| -04 | 100ml |
RC5172 Soxhlet Extraction Apparatus
Include one each of Allihn condenser, Soxhlet extractor and flat bottom flask.
Capacity
| -01 | 20ml |
| -02 | 40ml |
| -03 | 60ml |
| -04 | 100ml |
READING TELESCOPE
Fitted with an achromatic objective of FL about 17Bmm and clear aperture of 23mm. Eye piece B x. Ramsden type with cross line graticule. The focusing is done by rack and pinion mechanism and range from about 1000mm to infinity. Can be mounted on a retort stand.
Reagent Bottles
Narrow mouth, with plastic screw cap and polyvinyl liner.
Available in clear or amber glass.
Capacity
| -01 | 15ml |
| -02 | 30ml |
| -03 | 60ml |
| -04 | 125ml |
| -05 | 250ml |
| -06 | 500ml |
RECEIVER ADAPTERS, BENT, WITH STOP COCK
Bend with Socket connection and glass stop cock for providing fine flow control and positive closure in chemical corrosion free environment. Nos 20/1 Socket B14 Cone B14, Nos 20/2 Socket B19 Cone B19 & Nos 20/3 Socket B19 Cone B24.
RECEIVER ADAPTERS, STRAIGHT, WITH STOP COCK
Straight receiver adapter with socket connection and glass stop cock for providing fine flow control and positive closure in chemical corrosion free environment. Nos 21/1 Socket B14 Cone B14, Nos 21/2 Socket B14 Cone B19 & Nos 21/3 Socket B19 Cone B19.
RECOVERY BENDS VERTICAL
Useful in distillation assemblies in which the condenser is assembled in vertical mode. Available in Cone Size to fit flask 14/23 Cone Size to fit Condenser 14/23, Cone Size to fit flask 19/26 Cone Size to fit Condenser 19/26, Cone Size to fit flask 24/29 Cone Size to fit Condenser 19/26, Cone Size to fit flask 24/29 Cone Size to fit Condenser 24/29 & Cone Size to fit flask 45/40 Cone Size to fit Condenser 45/40.
RECOVERY BENDS, SLOPING
Provides a simple vapour conduit between the flasks and distillation condensers. Available in Size Cone Size to fit flask 14/23 & Cone Size 19/26, Cone Size to fit flask 19/26 & Cone Size 19/26, Cone Size to fit flask 24/29 & Cone Size 19/26, Cone Size to fit flask 24/29 & Cone Size 24/29, Cone Size to fit flask 29/32 & Cone Size 29/32, Cone Size to fit flask 34/25 & Cone Size 19/26.
Rectangular Base
Cast iron base having hammertone paint finish, with hole for rod. Without rod.
| SIZE | |
| -01 | 15x10cm |
| -02 | 20x12.5cm |
| -03 | 22.5x15cm |
Resorcinol
Resorcinol Packing - PB Qty - 100 Unit - g
Resorcinol
Resorcinol Packing - PB Qty - 250 Unit - g
Reticulocyte counting fluid (modified)
Reticulocyte counting fluid (modified) Packing - GB Qty - 125 Unit - mL
