Products
Categories
Chemistry Education Appliances
Sodium tungstate
Sodium tungstate Packing - PB Qty - 100 Unit - g
Sodium tungstate solution 10% w/v
Sodium tungstate solution 10% w/v Packing - PB Qty - 125 Unit - ml
Soil testing kit
Soil testing kit Packing - C Qty - 4x10 Unit - te
Soil testing kit refill pack (Reagent only)
Soil testing kit refill pack (Reagent only) Packing - C Qty - 4x10 Unit - te
SOLDERING FLUX PASTE
For applying to the surfaces being soldered to obtain a clean solder joint without and blow-hole or dry soldering. Supplied in pack of 50g.
SOLDERING IRON
With insulated handle, leak proof, lightweight body, element tested for high insulation, gives instant heating with constant tip temperature. Available in power ratings. Available with Pencil, Oval, Henlay Type Bits.
SOLDERING WIRE
Pack of 100g, used with soldering irons for soldering.
SOXHLET EXTRACTION HEATER, MANTLE TYPE
Comprises multiple heating mantles similar to HEATING MANTLES number of mantles for heating are provided instead of Hot Plates. Suitable for flasks of 200-350mL capacity. Also available in other capacities on specific request.
SOXHLET EXTRACTION HEATER, MANTLE TYPE - 3 Mantles, total Rating 480W, with single energy regulator for all the mantles
SOXHLET EXTRACTION HEATER, MANTLE TYPE - 4 Mantles, total Rating 640W, with single energy regulator for all the mantles
SOXHLET EXTRACTION HEATER, MANTLE TYPE - 6 Mantles, total Rating 960W, with single energy regulator for all the mantles
SOXHLET EXTRACTION HEATER, MANTLE TYPE - 3 Mantles, total Rating 480W, with inspanidual energy regulator for each.
SOXHLET EXTRACTION HEATER, MANTLE TYPE - 4 Mantles, total Rating 640W, with inspanidual energy regulator for each mantle
SOXHLET EXTRACTION HEATER, MANTLE TYPE - 6 Mantles, total Rating 960W, with inspanidual energy regulator for each mantle
SPADE CONNECTORS
Comprises spade shaped terminations made of plated metal insert, fitted in insulated plastic shank with 4mm end sockets for connection. Available in colours Red & Black.
SPANNERS SET
Metric sizes, set of seven, chrome alloy steel, double ended, covering sizes up to 1 9mm. Length of largest spanner 200mm approx.
Spatula, Chattaway
One end flat, other end bent up. Length 200mm.
SPATULA, CHATTAWAY, STAINLESS STEEL
'CHATTAWAY' pattern, one end flat and the other end bent up. Sizes (length) available are 125mm, 150mm & 200mm.
SPATULA, FLAT, STAINLESS STEEL
With flat blade on either end. Sizes (length) available are 125mm, 150mm & 180mm.
SPATULA, MICRO
Stainless steel spatula with small spoon shape at one end and other end flat with central portion circular wire shaped. Sizes (length) available are 100mm, 120mm, 150mm & 190mm.
SPATULA, NUFFIELD, STAINLESS STEEL
'NUFFIELO' pattern, with a scoop at one end and a bent-up flat blade at the other. Sizes (length) about 140mm.
SPATULA, PALETTE KNIFE, STAINLESS STEEL
'PALETTE KNIFE', flat, flexible blade with parallel sides in handle. Sizes (blade length) available are 100mm, 150mm & 200mm.
Spatula, Stainless Steel
Spoon at one end and spatula at the other. Made of stainless steel.
Length
| -01 | 100mm |
| -02 | 150mm |
| -03 | 200mm |
SPATULA, TRULLA, STAINLESS STEEL
Spatula having recessed middle portion running along the complete length. Length about 175mm.
Spatula, With Handle
Stainless steel blade with a wooden handle for firm grip.
Blade Length
| -01 | 100mm |
| -02 | 150mm |
SPATULA, WITH SPOON, POLYPROPYLENE
Moulded in polypropylene, consist of spoon at one end, while other end is flat construction with a knife edge, Sizes [length] available are 150mm & 200mm.
SPATULA, WITH SPOON, STAINLESS STEEL
One end flat and the other end spoon form. Apart from holding powdered solids, spoon end is ideal for crushing lumps, breaking cakes etc., while the flat rectangular end is useful for scraping chopping etc. Sizes (length) available are 125mm, 150mm, 180mm & 210mm.
SPECTROPHOTOMETER, DIGITAL
A highly stable and accurate spectrophotometer features direct concentration facility.
TECHNICAL SPECIFICATIONS
Wavelength Range : 340 to 960nm
Resolution : 0.1%T, Abs 0.001, Conc. 1.0
Output : %T: 0-100%, Abs: 0-1.999, Conc : 0-1999
Detection : Silicon Photodiode
Light Source : Tungsten halogen Lamp BV, 10W
Monochromator : BOO lines/mm Diffraction Grating
Sample Holder : 1 Omm Test Tubes
Spectral Bandwidth : 10nm
Wavelength resolution : 5nm
Wavelength Accuracy : ±2.5nm
Repeatability : ±2nm
Recorder Output : Available
Display : 3 1/2 digit Bright Red LED display
Power Input : 220V ± 10%, 50Hz AC
Accessories : Test Tubes (10mm path length) -1 set, Dust Cover-1 No. Operation Manual- 1 No.
TECHNICAL SPECIFICATIONS
Wavelength Range : 340 to 960nm
Resolution : 0.1%T, Abs 0.001, Conc. 1.0
Output : %T: 0-100%, Abs: 0-1.999, Conc : 0-1999
Detection : Silicon Photodiode
Light Source : Tungsten halogen Lamp BV, 10W
Monochromator : BOO lines/mm Diffraction Grating
Sample Holder : 1 Omm Test Tubes
Spectral Bandwidth : 10nm
Wavelength resolution : 5nm
Wavelength Accuracy : ±2.5nm
Repeatability : ±2nm
Recorder Output : Available
Display : 3 1/2 digit Bright Red LED display
Power Input : 220V ± 10%, 50Hz AC
Accessories : Test Tubes (10mm path length) -1 set, Dust Cover-1 No. Operation Manual- 1 No.
SPECTROPHOTOMETER, MICROPROCESSOR BASED
Main features include
· Highly accurate and stable
· RS-232C computer interface
· Soft touch membrane keys
Technical Specifications : Wavelength Range - 340 to 960nm, Wavelength resolution - 1nm, Wavelength Accuracy - ±1nm,
Spectral Slitwidth - <5nm, % Transmission - 0.0 to 100%T, Absorbance 0-1.999A, Concentration - 0 to 19999, K Factor - 0.1 to 19999, Resolution - 0.1%T 0.001 Abs, Stray radiant Energy - ±2% or lessor at 340nm and 400nm, Photometer Accuracy - Less than 0.01 Abs, Monochromator - 600 lines / nm Diffraction Grating, Photodetector Wide Range Silicon Photodiodes, Display - 16x2 line LCD back lit display, Key Board - 8 keys soft touch membrane type, Data Storage - up to 100 samples, Light Source - Tungsten Halogen Lamp 6V, 10W, Sample Holder - 10mm Glass Cuvettes, Printer Interface - for any Centronics dot matrix printer, Power Input - 220V ± 10%, 50Hz AC.
· Highly accurate and stable
· RS-232C computer interface
· Soft touch membrane keys
Technical Specifications : Wavelength Range - 340 to 960nm, Wavelength resolution - 1nm, Wavelength Accuracy - ±1nm,
Spectral Slitwidth - <5nm, % Transmission - 0.0 to 100%T, Absorbance 0-1.999A, Concentration - 0 to 19999, K Factor - 0.1 to 19999, Resolution - 0.1%T 0.001 Abs, Stray radiant Energy - ±2% or lessor at 340nm and 400nm, Photometer Accuracy - Less than 0.01 Abs, Monochromator - 600 lines / nm Diffraction Grating, Photodetector Wide Range Silicon Photodiodes, Display - 16x2 line LCD back lit display, Key Board - 8 keys soft touch membrane type, Data Storage - up to 100 samples, Light Source - Tungsten Halogen Lamp 6V, 10W, Sample Holder - 10mm Glass Cuvettes, Printer Interface - for any Centronics dot matrix printer, Power Input - 220V ± 10%, 50Hz AC.
SPHEROMETER, BRASS DISC
Similar to SPHEROMETER, SIMPLE but with heavier brass disc table in place of the three prongs. Legs are also of stainless steel.
SPHEROMETER, BRASS DISC Screw Pitch 0.05mm, LC 0.005mm
Similar to SPHEROMETER, SIMPLE but with heavier brass disc table in place of the three prongs. Legs are also of stainless steel.
SPHEROMETER, BRASS DISC Screw Pitch 1 mm, LC 0.01 mm
Similar to SPHEROMETER, SIMPLE but with heavier brass disc table in place of the three prongs. Legs are also of stainless steel.
SPHEROMETER, DELUXE
A bigger sized spherometer having triangular shaped heavy cast metal table with three accurately positioned pointed steel legs at its underside. The center of table has a stainless steel micrometer head at its center with a graduated circular table capable of measuring displacement as small as 0.002mm. The circular table screws/unscrews along a vertical scale graduated in millimeters. Suitable for lenses / mirrors 75mm or more in diameter.
SPHEROMETER, SIMPLE
Used primarily for the precise measurement of radius of curvature of curved surfaces such as lenses and mirrors. Brass disc of about 40mm diameter, graduated 100 spanisions, rests on the center of a three pronged brass table, through a steel screw. Each prong carries a pointed leg of MS below it equidistant from each other. A vertical scale, graduated 10-0-10mm mounted on one of the prongs.
SPHEROMETER, SIMPLE Screw Pitch 0.05mm, LC 0.005mm
Used primarily for the precise measurement of radius of curvature of curved surfaces such as lenses and mirrors. Brass disc of about 40mm diameter, graduated 100 spanisions, rests on the center of a three pronged brass table, through a steel screw. Each prong carries a pointed leg of MS below it equidistant from each other. A vertical scale, graduated 10-0-10mm mounted on one of the prongs.
SPHEROMETER, SIMPLE Screw Pitch 1 mm, LC 0.01 mm
Used primarily for the precise measurement of radius of curvature of curved surfaces such as lenses and mirrors. Brass disc of about 40mm diameter, graduated 100 spanisions, rests on the center of a three pronged brass table, through a steel screw. Each prong carries a pointed leg of MS below it equidistant from each other. A vertical scale, graduated 10-0-10mm mounted on one of the prongs.
SPIRIT LAMP - Aluminium
Sheet die pressed, with woven wick in metal holder, screw on cap. Capacity 100ml. Also available in Brass & Stainless Steel.
SPIRIT LAMP - Brass
Sheet die pressed, with woven wick in metal holder, screw on cap. Capacity 100ml. Also available in Aluminium & Stainless Steel.
SPIRIT LAMP - Stainless Steel
Sheet die pressed, with woven wick in metal holder, screw on cap. Capacity 100ml. Also available in Aluminium & Brass.
SPIRIT LAMP, BULB SHAPED, GLASS
With metal wick holder screw-on type and glass top cover, superior quality. Capacities available are 60ml & 125ml.
SPIRIT LAMP, BULB SHAPED, GLASS, SUPERIOR
Similar to SPIRIT LAMP, BULB SHAPED, GLASS but with plastic wick holder screw-on type and glass top cover, push fit type, superior quality.
SPIRIT LAMP, CYLINDRICAL, GLASS, SUPERIOR
Similar to SPIRIT LAMP, BULB SHAPED, GLASS but with plastic wick holder screw-on type and plastic top cover, push fit type, superior quality.
SPIRIT LAMP, POLYHEDRAL SHAPED, GLASS
Polyhedral, heavy duty allows the position of flame at just the right angle for each task, complete with cap and one wick.
SPIRIT LEVEL
Simple, for horizontal use. Mounted in a wood casing. Dveralilength about 230mm.
SPIRIT LEVEL, CIRCULAR
Circular pattern, about 25mm diameter, housed in plated metal case with drilled flange.
SPIRIT LEVELS
Specially designed spirit levels to ensure high standards or precision and reliability. Shock proof and unbreakable bubble tube or vials manufactured with latest technique to prevent vaporization and leakage under normal working conditions, Each level electronically calibrated to ensure precise mounting and alignment of vials and require no adjustment by the user.
SPIRIT LEVELS
Specially designed spirit levels to ensure high standards or precision and reliability. Shock proof and unbreakable bubble tube or vials manufactured with latest technique to prevent vaporization and leakage under normal working conditions, Each level electronically calibrated to ensure precise mounting and alignment of vials and require no adjustment by the user. Heavy duty level, made from extruded aluminium alloy with ribbed body for extra strength and improved grip, desirable for professional use. Strengthened end caps for added protection and convenient handling of the level. Sizes available are
No. of Vials Sizes
1 Vial 10, 30cm
2 Vials 30,40,50,60,80,90,100 & 120cm
3 Vials 30,40,50,60,80,90,100&120cm
4 Vials 150, 180 & 200cm
These levels are available with optional add-ons, such as graduated edge, magnetic base and angle setter
No. of Vials Sizes
1 Vial 10, 30cm
2 Vials 30,40,50,60,80,90,100 & 120cm
3 Vials 30,40,50,60,80,90,100&120cm
4 Vials 150, 180 & 200cm
These levels are available with optional add-ons, such as graduated edge, magnetic base and angle setter
SPIRIT LEVELS
Specially designed spirit levels to ensure high standards or precision and reliability. Shock proof and unbreakable bubble tube or vials manufactured with latest technique to prevent vaporization and leakage under normal working conditions, Each level electronically calibrated to ensure precise mounting and alignment of vials and require no adjustment by the user. Levels manufactured from light-weight and economical profile, and is meant for normal routine use. Comes with metric graduated edge for linear measurements. Sizes available are
No. of Vials Sizes
1 Vial 10cm
2 Vials 15,20,30,45,60,80,90,100& 120cm
3 Vials 30,45,60,80,90,100&120cm
These levels are available with optional add-ons, such as magnetic base and angle setter .?
No. of Vials Sizes
1 Vial 10cm
2 Vials 15,20,30,45,60,80,90,100& 120cm
3 Vials 30,45,60,80,90,100&120cm
These levels are available with optional add-ons, such as magnetic base and angle setter .?
SPIRIT LEVELS
Specially designed spirit levels to ensure high standards or precision and reliability. Shock proof and unbreakable bubble tube or vials manufactured with latest technique to prevent vaporization and leakage under normal working conditions, Each level electronically calibrated to ensure precise mounting and alignment of vials and require no adjustment by the user. Made of heavy duty, high precision pressure die-cast body. The base is precision machined for high degree of leveling accuracy. With two vials precisely fitted for horizontal and vertical leveling. Magnetic base available optionally. Sizes available are 30, 40, 50 and 60cm.
SPIRIT LEVELS
Specially designed spirit levels to ensure high standards or precision and reliability. Shock proof and unbreakable bubble tube or vials manufactured with latest technique to prevent vaporization and leakage under normal working conditions, Each level electronically calibrated to ensure precise mounting and alignment of vials and require no adjustment by the user. Made of sturdy plastic body with tapered ends, which slides easily into the pocket for convenient carrying. Fitted with three vials, horizontal, vertical and at 45?. Comes with magnetic base.
SPLASH HEAD, ADAPTER
Available in Socket Size 19/26 & Cone Size 24/29.
SPLASH HEAD, DOUBLE BULB, SLOPING
Available in Cone Size to fit flask 24/29 Cone Size to fit condenser 19/26 Socket Size 14/23.
SPLASH HEAD, VERTICAL
A splash head similar to RECOVERY BENDS VERTICAL for use in distillation assemblies in which condenser is assembled in vertical mode. Its lower cone accepts flask, upper cone accepts condenser. Splash head reduces entrainment of raw liquid into the vapour stream. Available in Cone Size to fit flask 19/26 Cone Size to fit condenser 19/26, Cone Size to fit flask 24/29 Cone Size to fit condenser 19/26 & Cone Size to fit flask 24/29 Cone Size to fit condenser 24/29.
SPOKESHAVE, FLAT BLADE
Malleable iron frame with adjustable flat blade cutter 53mm wide. Overall length 225mm approx.
SPOON, SODIUM
For holding sodium under water. Comprising rust proof metal wire stem and strong cage to safely enclose the sodium.
SPOTTING PLATES
Made of porcelain, glazed. With 6 Depressions and 12 Depressions.
