Products

Our clamps feature strong malleable iron frames that are painted to reduce corrosion.

C-Clamp, 3 jaw opening

Steam autoclavable, polypropylene molded tray has a built-in handle for easy carrying of reagents or laboratory ware using one hand.

380 x 240 x 115mm

Molded in polypropylene and polycarbonate, these tubes have excellent clarity and are strong enough to be used up to 50,000xG. These tubes can be autoclaved; however, repeated autoclaving in PC tubes reduces their mechanical strength.

16ml

For rods to 19mm in diameter

Cast iron, Brass Thumb Screws

Quality clay pipe on havy gauge galvanized steel wire. Inspanidually packed in ploy bags, and chip board boxes.

1 1/2 Side length

These conical measures are very good for measuring small qunatities of reagents. Molded in polypropylene, these autoclavable measures have a hexagonal base which provides it excellent stability. The measures are clear, have good chemical resistance, and have raised graduations for easy reading.

12ml

Good quality plated brass cork borers with handles

Set of 3

Overall length 9, riveted joints, tips are serrated.

Brass

Unibody construction with one piece of sheet nickel, polished inside and out. Lids sold separately.

15ml

Very good, quality porcelain crucibles, made to withstand temperatures up to 1150 degrees C. Glazed inside and out, except for outside bottom surface. Lids included.

15ml

Unibody construction with one piece of stainless steel. Lids sold separately.

15ml

These Cryo Boxes are molded in polycarbonate, making them extra strong and autoclavable. They are designed to be used at temperatures ranging from -190 degrees C to 121 degrees C. The transparent covers provide a good view of the contents, and are numbered for better inventory control.

81 places of 1.0ml or 1.8ml vials.

Molded in polypropylene, these cryo boxes feature hinged box tops. Available in 2 different sizes, these autoclavable boxes feature an alphanumeric index for easy identification of different vials placed inside.

81 places for 1.0ml or 1.8ml vials

Molded in polypropylene , our Cryo Racks are tough, autoclavable, and hold 50 vials. Vials can be unscrewed without actually picking them up as the vial will lock in each well, and will not twist while unscrewing. Rack comes with four anti-skid rubber feet, and each well is identifiable with an aphanumeric index.

Cryo Rack

These autoclavale desiccators are made of polypropylene (PP) and Polycarbonate and can hold vacuum up to 740mm Hg for 24 hours without any greasing. The PP stopcock has a self-lubricating PTFE plug that works to create the vacuum, shut it off and release it. Non-vacuum (Plain) desiccators are physically the same as vacuum desiccators. Only difference is the absence of stopcock. Grease should be applied on the glanges to make it air-tight.

8

Blown in low density polyethylene, these dropping bottles dispense small uniform drops of liquid when pressed lightly.

60ml, pack of 12

Ergonomically designed to operate, our electronic pipettes are available in 6 models to meet all of your pipetting needs. Each pipette is inspanidually calibrated according to ISO 8655 standards. A calibration certificate is provided with each pipette. A charging unit is included at no additional cost.

Volume Range is 0.2-1.0 ul in increments of 0.05 ul and compatible tips are 10 ul.

Used for celloidin or paraffin sections, these embedding blocks are made of phenolic resin, which can be marked with a glass marking pencil. Top surface has 1/32 deep grid to provide a firm hold for embedding specimen. Blocks are 3/4 high.

Embedding Blocks, 1/2 x 1/2, pack of 10

Extension clamp with cork covered jaws, 8 total length

Extension clamp, Steel

Zinc plated STEEL extension rings. Rod diameter is 5/16, overall

Ring Diameter is 2

Variable Volume (Fully Autoclavable)

Volume Range is 0.2-2.0 ul in increments of 0.01 ul and compatible tips are 20 ul.

Made of polypropylene, these corrosion free funnel holders can hold funnels with diameters 3 to 6. The extra plate provided can be placed to hold funnels having diameter 1 to 3. Tow tapered wedges are provided to ensure firm grip on rods having 1/2 or 3/8 diameter.

Funnel Holder

A good quality polyethylene powder funnel for general lab use. Dimensions are 25mm stem diameter, 100mm top diameter. And 100mm overall length.

Powder Funnel, 100mm

Material: HDPE

125mm dia.

These unbreakable polypropylene funnels have three external ribs. Internal angle of bowl is 60 degrees. Stem length is approximately the same as diameter.

55mm dia.

Stirring rods with pre-assembled rubber policeman

5 / 3mm, pack/12