Products
Categories
Plastic Labware
.jpg)
PIPETTE STAND (HORIZONTAL)
| Completely detachable stand, moulded in polypropylene, is totally noncorrosive and unbreakable, and can hold a total of 12 pipettes, 6 on each side. This autoclavable stand has two sides attached to each other through three metallic rods coated with polypropylene. |
|
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 2072320 | For 12 Pipettes |
.jpg)
PIPETTE STAND (VERTICAL)
| Stable, non-corrosive, detachable stand with heavy base, which can hold maximum of 28 pipettes of up to 14mm diameter. The base measures 225mm in diameter and a polypropylene coated square rod about 375mm in length is screwed on to the base. This rod carries two discs, upper one has holes for holding pipettes while lower one has pilot holes for supporting tips of the pipettes from where liquid drains out to the base. The distance between both the discs is adjustable according to length of the pipette. |
|
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 2072360 | For 28 Pipettes |
PIPETTE STERILE SEROLOGICAL
| Material: PS | |
| Cat. No. | Capacity mL |
| 5013100/1 |
1 mL |
| 5013100/2 |
2 mL |
| 5013100/3 |
5 mL |
| 5013100/4 |
10 mL |
| 5013100/5 | 25 mL |
PIPETTE STORAGE RACK
| Unbreakable rack, made of ABS plastic, useful for holding and storing pipettes. The rack holds 1 to 25mL pipettes in bulk, in packs or in common sizes of cans. It features 4 different compartments, angled, for easy loading and retrieval. Unique windows allow viewing of enclosed pipettes to determine supply level. ABS plastic construction makes it scratch resistant and easily cleanable. Each rack comes with two accessory attachments for holding pipette filler and pipette bulb. | |
| Material: Light Polypropylene | |
| Cat. No. | Description |
| 2072410 | Pipette Storage Rack |
PIPETTE, MICROLITER, FIXED VOLUME
| A range of economic, accurate, fixed volume micro-pipettes. Designed for exceptional comfort in use and high precision. Fully autoclavable to 121° C. Capacities available are |
|||
| Cat. No. | Capacity | Cat. No. | Capacity |
| 2066150/1 | 2μL | 2066150/8 | 200μL |
| 2066150/2 | 5μL | 2066150/9 | 250μL |
| 2066150/3 | 10μL | 2066150/10 | 300μL |
| 2066150/4 | 20μL | 2066150/11 | 400μL |
| 2066150/5 | 25μL | 2066150/12 | 500μL |
| 2066150/6 | 50μL | 2066150/13 | 1000 μL |
| 2066150/7 | 100μL | ||
PIPETTE, MICROLITER, VARIABLE VOLUME:
| A range of economic, accurate, variable volume with precise control micropipettes. These are continuously adjustable and are designed for exceptional comfort and accuracy. Easy to read digital display remains visible during pipetting. the volume adjustment wheel is recessed to prevent unintentional change, yet can be easily adjusted when required. Fully autoclavable to 121°C. Capacities available are |
|
| Cat. No. | Capacity |
| 2066180/1 | 0.5 - 2μL |
| 2066180/2 | 1 - 10μL |
| 2066180/3 | 2 - 20μL |
| 2066180/4 | 10 - 100μL |
| 2066180/5 | 20 - 200μL/td> |
| 2066180/6 | 200 -1000μL |
| 2066180/7 | 1000 - 5000μL |
PIPETTES, DISPOSABLE
| Disposable, Pasteur type, soft plastic, single piece blown from resistant polythene, without teat, supplied in pack of 250. Sizes (length) available are | |
| Cat. No. | Length mm |
| 2065910/1 |
145mm |
| 2065910/2 |
230mm |
PNEUMATIC TROUGH
| Made of polypropylene, these trough are autoclavable. Useful for wide range of purposes including storage, sterilizing and drying labware etc. Sizes (height × diameter) available are |
|
| Cat. No. | Particulars |
| 2067620/1 |
ø- 180 x h-60 mm |
| 2067620/2 |
ø- 200 x h-100 mm |
| 2067620/3 | ø- 250 x h-100 mm |
POLICEMEN STIRRING RODS
| This is, in fact, a multipurpose product made of polypropylene, designed in the form of circular rods with flat ends, thus enables its use as stirrer as well as spatula. The two different shaped flattened ends of this rod form two small spatulas. Available in size 245×6mm (length × diameter). |
|
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 2066530 | ø- 6 mm. x h-245 mm. |
POLYGON MAGNETIC STIRRING BAR
| Comprising strong magnets coated with PTFE to provided long-life stirring operation. For use along with magnetic stirrers. Cat. No. (f x I) mm |
|
| Material :PTFE / Alnico V Magnet | |
| Cat. No. | (f x I) mm |
| 5040600/1 |
8 x 14 mm |
| 5040600/2 | 8 x 22 mm |
| 5040600/3 | 8 x 30 mm |
| 5040600/4 | 8 x 40 mm |
| 5040600/5 | 8 x 50 mm |
| 5040600/6 | 8 x 60 mm |
POWDER FUNNEL
| Used for transferring powder. Parallel stem minimize bridging of powder and external ribs prevent air lock. | |
| Material: PP Autoclavable | |
| Cat. No. | f mm |
| 5012450/1 |
65 |
| 5012450/2 |
80 |
| 5012450/3 |
100 |
| 5012450/4 | 150 |
.jpg)
RACK FOR MICRO CENTRIFUGE (FOLDING)
| These two – tier versatile racks, made of polypropylene, are autoclavable & can be used dry, in water baths or in freezers. These racks are provided with alpha numeric index for easy sample identification. Racks are stack able even when loaded and have purpose designed label spaces on each side. |
|
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 5021200 | 100 Places for 1.5 mL MCTs |
RACK FOR SCINTILLATION VIAL
| These Racks for Scintillation Vials, moulded in Polypropylene, are autoclavable & corrosion resistant. There is an inspanidual rack for both 8 mL & 20 mL vials. These rugged & stable racks can hold scintillation vials for convenient storage, handling & sample preparations. |
|
| Material: Polyethylene | |
| Cat. No. | Particulars |
| 5051500/1 | Rack for 90 vials of 8 mL capacity |
| 5051500/2 | Rack for 50 vials of 20 mL capacity |
REAGENT RESERVOIR
| Moulded in Polypropylene, this autoclavable Reagent Reservoir is helpful for multi-channel pipettes to be used into microtiter plates. | |
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 5013500 | 75 mL |
RETORT STAND WITH ROD
| The non-corrosive moulded Retort Stands provide excellent replacement of the metal ones. The base and the rod have no exposed metal parts to corrode. The metal rod has moulded polypropylene covering to make it non-corrosive, and acid / alkali resistant, with overall size about 12.5×750mm (diameter × height) and has threads at one end for screwing on top of retort base. The polypropylene thick, weighted, stable and smooth base has a deep thread at its top to take the rod. Base sizes available are |
|
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 2071920/1 | 225 x 150 mm-Side hole |
| 2071920/2 | 300 x 200mm- Centre hole |
| 2071920/3 | 300 x 200mm- Side hole |
ROCKER VACUUM PUMP
| Useful for liquid filtration for microbiology, suspended solid test, stack or ambient gas sampling etc. Piston powered, oil free vacuum pump having compact size and lightweight, aluminium die-cast construction. Comes with a moisture trap/vacuum regulator. Rated for continuous use. Specially designed to keep vibration and noise level to minimum. Supplied with a vacuum gauge attached to indicate the vacuum level at any instant. This rugged, durable compact and portable vacuum pump is available in two models with following specifications. |
||
| Cat. No. | Model | |
| 2050440/1 |
Rocker 300 | |
| 2050440/2 | Rocker 400 | |
| Specification | Rocker 300 | Rocker 400 |
| 220V / 50hz | 220V / 50hz | |
| Max. vacuum | 600 mm Hg | 650 mm Hg |
| 200 mm Hg | 3 Sec | 2 Sec |
| 300 mm Hg | 5 Sec | 3 Sec |
| 400 mm Hg | 8 Sec | 4 Sec |
| 500 mm Hg | 14 Sec | 6 Sec |
| 600 mm Hg | 25 Sec | 11 Sec |
| 650 mm Hg | - | 18 Sec |
| Max flow rate | 13 L /Min. | 23 L/Min. |
| Motor Rotation | 1400 RPM | 1400 RPM |
| Horse Power | 1/8 HP | 1/6 HP |
| Pole | 4 P | 4P |
| Net Wt. | 4.1 Kg. | 5.2 Kg. |
| Port Thread | 1/8 PS | 1/8 PS |
| Noise Level | 54 db | 54 db |
ROTARY MIXER
| Ideal for serial rotation of tubes for extraction diffusion etc. It consists of a series of U-shaped, plastic coated spring clips mounted on both sides all along the length of a rectangular bar for holding test tubes of diameter 10 to 30mm, which in turn is mounted on the rotor unit. The other end of rectangular bar is supported on pillar by means of a bearing. The rotor assembly has variable speed motor with provision for adjusting rotational speed from 5 to 50 RPM. Also incorporates a user settable timer from 0-99 hours / 1-59 minutes. The electronic touch panel having soft touch membrane type keypad along with 7 segment bright red LED display allows for convenient operation. Specially designed quick easy coupling mechanism for exchange of rotating bars. Operates on 220V AC, 50Hz. |
|
| Cat. No. | Description |
| 2051280/1 | Rotary Mixer |
| 2051280/2 |
Bar for 50 x 1.5 mL tube |
| 2051280/3 |
Bar for 20 x 15 mL tube |
| 2051280/4 | Bar for 12 x 50 mL tube |
ROUND MAGNETIC STIRRING BAR WITH PIVOT RING
| Comprising strong magnets coated with PTFE to provided long-life stirring operation. For use along with magnetic stirrers. | |
| Material : PTFE / Alnico V Magnet | |
| Cat. No. | (f x I) mm |
| 5040550/1 | 8 x 14 mm |
| 5040550/2 | 8 x 22 cm |
| 5040550/3 | 8 x 30 cm |
| 5040550/4 | 8 x 40 cm |
| 5040550/5 | 8x 50 cm |
| 5040550/6 | 8 x 65 cm |
| 5040550/7 | 9.5 x 14 cm |
| 5040550/8 | 9.5 x 22 cm |
| 5040550/9 | 9.5 x 30 cm |
| 5040550/10 | 9.5 x 40 cm |
| 5040550/11 | 9.5 x 50 cm |
| 5040550/12 | 9.5 x 65 cm |
| 5040550/13 | 12.7 x 38 cm |
| 5040550/14 | 12.7 x 76 cm |
SAFETY GOGGLES
| For protecting eyes from harmful substances. Completely cover eyes from all sides. | |
| Cat. No. | |
| 2110240/1 | Single piece clear white plastic, can be used over normal spectacles. With adjustable elastic band. |
| 2110240/2 | Similar to Cat No. 2110240/1, but made of clear plastic tinted in slightly darker shade. |
| 2110240/3 | Spectacle shaped, Single piece clear plastic front bent in Lshape to prevent eyes from the sides, in unbreakable plastic frame. Features fog-guard, and slip resistant nosepiece with a wraparound design. Reinforced hinges add support and durability. |
| 2110240/4 | Spectacle shaped black frame with clear plastic lens for each eye and rotatable guard to block sides of the eyes from nose side or from opposite side. Ideal for protecting the eyes from flying debris. |
SAFETY GOGGLES
| Unbreakable, lightweight, moulded clear plastic front, trendy shaped glasses, modern design available in different shapes with integrated side shields. These goggles provides panoramic vision. Contoured, slipresistant nose-pad for convenient wearing. | |
| Cat. No. | |
| 2110280/1 | With black arms, length of the arms adjustable |
| 2110280/2 | With Clear transparent arms |
SAMPLE CONTAINER (PRESS & FIT TYPE)
| Made of polypropylene, these disposable Containers are used for collecting samples of sputum or urine etc. Graduated on the outer surface, these containers have cap that work in a press & fit manner & make these containers leakproof. These disposable containers are E.T.O. sterilized. |
|
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 5013600/1 |
50 mL |
| 5013600/2 | 25 mL |
SCINTILLATION VIAL
| These unbreakable vials, moulded in Polyethylene, are fitted with leakproof screw caps. These vials can be used with standard counting equipment for liquid scintillation system and are excellent for low activity count. | |
| Material: High Density Polyethylene | |
| Cat. No. | Particulars |
| 5051450/1 | 8 mL |
| 5051450/2 | 20 mL. |
SCOOP
| Tough, transparent polycarbonate scoops have high impact resistance and would not rust or corrode. they comply with FDA regulation and are NSF certified for bakery/restaurant use. | |
| Material: Polypropylene | |
| Cat. No. | Capacity mL |
| 5013700/1 | 250 mL |
| 5013700/2 | 1000 mL |
| 5013700/3 | 2000 mL |
Scoop
| Capacity |
Case of |
| 250 cc |
6 pcs |
| 750 cc |
6 pcs |
| 1000 cc | 6 pcs |
SEPARATING FUNNEL HOLDER
| This non-corrosive separating funnel holder has a front opening providing clear view of the solutions and allows unobstructed placement of separating funnels. Provided with two tapered wedges to ensure firm grip on retort stand rods of diameters from 9.5 to 12.5mm. |
|
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 2070960 | Seperatory Funnel Holder |
SEPERATORY FUNNEL
| Polypropylene separating funnel features excellent contact clarity and strength with inertness to acids / alkalis and is autoclavable. Comes with a leak-proof threaded screw-cap. The polypropylene stop-cock is fitted with PTFE key, and is push fitted to the stem of the separating funnel. Available in capacities | |
| Material : Polypropylene | |
| Cat. No. | Particulars |
| 2065100/1 |
100 mL |
| 2065100/2 |
250 mL |
| 2065100/3 |
500 mL |
SHAPES OF MOLECULES SET
| For making different shapes of molecules as per electron repulsion theory. Contains sufficient parts to make eight atomic models. Consists of | ||
| Spheres: | Chlorine 7(1 Hole), 1(4 Hole) | |
| Hydrogen 13 | Fluorine 9 | |
| Metal (Beryllium) | 1Boron 1 | |
| Oxygen 1 | Nitrogen 1 | |
| Carbon 1 | Sulphur 1 | |
| Phosphorous 1 | ||
| Orbitals | Grey (pear shaped) 26 | |
| Beige (Sphere) 6 | Beige (pear Shaped) 6 | |
| White Link 6 | ||
| With instruction leaflet. | ||
| Cat. No. | 2100640 | |
SIMPLE CELL POT
| Simple Cell Pot, as the name suggests, is used for making Simple Cells & Voltmeters etc. Moulded in Polypropylene, this Pot has very good contact clarity and excellent chemical resistance. Being in Polypropylene, this Pot is much durable than the one used conventionally. | |
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 5011150 |
Simple Cell Pot |
SIMPLE INORGANIC MOLECULAR MODEL KIT
| The kit makes basic concepts about the principles of molecular geometry easy to visualize and understand. This kit offer building of a large number of 3 dimensional molecular models with a visual appreciation of Molecular Bounding. Also demonstrates, how the shapes of molecules are determined by the number of bonds plus the lone pairs in the valence shell of the center atom. Showing lone pairs is a unique specialty with these models. For showing the molecules based on tetrahedron you can make methane. For triangle by pyramid, you can make phosphorus pentachloride; and for octahedron you can build Sulphur hexafluoride and soon, | |
| Some of the structures that can be easily built include:CO , CH , PCI , SF , NH , H O, 2 4 5 6 3 2 BCI , Sulphur ring SH, oxides of Nitrogen, Phosphorous P Molecule, H SO , simple 3 4 2 4 and complex structures, and many more. | |
| Contents: Oxygen, Nitrogen, Sulphur, Phosphorous, Chlorine, Hydrogen, Covalent & Multiple (total components about 140 Nos., packed in a suitable plastic case. Also includes a teachers guide/instruction manual with full details on how to make all these model and more. | |
| Cat. No. | 2100280 Simple Inorganic Molecular Model Kit |
SIPHON, WITH BELLOWS
| Polyethylene, strong bellows, fine leak proof stop cock to dispense liquid, avoids spillage and burning problem. Acid-alkali proof. | |
| Material: LDPE | |
| Cat. No. | Size |
| 2066330/1 |
Medium |
| 2066330/2 | Large |
SLIDE MAILER
| Slide Mailers present the best option to carry prepared slides &om one place to another. Moulded in Polypropylene, these Slide Mailers areavailable in three sizes i.e. 1, 2 & 5 slides. | |
| Material: Polystyrene | |
| Cat. No. | Particulars |
| 5050750/1 | 1 Slides |
| 5050750/2 | 2 Slides |
| 5050750/3 | 5 Slides |
SLIDE STORAGE RACK
| This slides storage rack made of ABS can hold 100 slides, easily recognizable through the numeric indexing. Spacing between the slots provides adequate backward & forward movement of slides for convenient sorting and searching. The transparent cover provides excellent view of the slides stored inside. | |
| Material: Polystyrene | |
| Cat. No. | Particulars |
| 4030800 | 100 Slides |
SLIDES DISPENSER
| Holds up to 70 slides, 76 × 26mm (length × width) stacked inside the clear acrylic cover. Slides are dispensed by turning the knob at either side. Dimensions slide holder 75 × 35 × 70mm (width × depth × height). Overall length from the base 140mm. Base 100 × 120mm approx. (width × depth). | |
| Material: ABS / PC | |
| Cat. No. | Places |
| 4030350 | 50 |
SOFT LOOP STERILE
| This non-toxic disposable loop made of polystyrene, is accurate to semi quantitative stand for handling samples. | |
| Material: Polystyrene | |
| Cat. No. | Particulars |
| 4012520/1 | Soft Loopes-1mI |
| 4012520/2 | Soft Loopes-10mI |
| 4012520/3 | Inoculation Needle |
SPATULA, WITH SPOON,
| Moulded in polypropylene, consist of spoon at one end, while other end is flat construction with a knife edge. Sizes (length) available are | |
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 2066540/1 |
150 mm |
| 2066540/2 | 200 mm |
Specimen Tube
| With Press type cap Transparent, Non Autoclavable | |
| Dimensions | Case of |
| 2" X 1" | 50 pcs |
| 3" X 1" | 50 pcs |
SPECIMEN/GAS JAR
| These transparent Specimen jars, used for preserving different specimens in the lab are provided with a cap that fits in tight. These jars provided excellent protection to the species preserved in it. |
|
| Material : Polypropylene | |
| Cat. No. | Particulars |
| 5012600 |
ø 50 mm x h200 mm |
| 2080480/2 | 500 mL |
| 2080480/3 | 1000 mL |
SPILFYTER? LAB SOAKERS
| Chemical and skid resistant backing absorbs spills and cushion delicate glassware. Used for lining hoods, animal cages, trays, drawers or shelves. Can be used as bench top protector, and as floor soaker for wiping up spills. Light-Duty soakers absorbs 750 ml/ Sq meter |
|
| Cat. No. | (W×L) |
| 5060200/1 | 16”×20'pad |
| 5060200/2 | 20” ×400'Roll |
| Heavy-Duty soakers with durable top fabric absorbs 1050 mL/Sq meter | |
| Cat. No. | (W×L) |
| 5060200/3 | 16”×20”pad 200 pads |
| 5060200/4 | 20”×200' Roll |
SPIN WINGS
| Comprising strong magnets coated with PTFE to provided long-life stirring operation. For use along with magnetic stirrers. |
|
| Material :PTFE / Alnico V Magnet | |
| Cat. No. | Description |
| 5041000/1 |
Triangular, half round |
| 5041000/2 | and half round taper |
STAINING BOX
| Moulded in Polypropylene, this Staining Box helps in staining, fixing, destaining and handling fragile electrophoresis gels and memhranes. Box as well as cover will resist temperatures from -70°C to + 70°C. The LDPE plug provides leakproof seal and allows easy liquid drainage. | |
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 5013900 |
125 x 125 x 50 mm |
STAINING/COPLIN JAR
| Take 10 Slide 76 x 26mm back to back |
|
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 4030300/2 | Coplin Jar |
STIRRER
| Made of polypropylene, these stirring rods are non-corrosive, non-staining and are very useful for stirring different solutions in the laboratory. These stirrers have been designed to be tough and long-lasting in use. Sizes:(length × diameter) available are |
|
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 2066550/1 | ø- 10 mm x h-250mm |
| 2066550/2 | ø- 7 mm x h-200mm |
| 2066550/3 | ø- 7 mm x h-250mm |
| 2066550/4 | ø- 7 mm x h-300mm |
STOOL CONTAINER
| These containers, as the name suggests, are used for collecting stool samples. The cap is provided with a spoon like structure that proves helpful in lifting samples. | |
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 5051900/1 | 30 mL |
| 5051900/2 | 60 mL |
STOOL CONTAINER
| In addition to the range of existing sample containers, this Stool Container has the unique feature of one piece moulded cap-spoon combination. |
|
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 5051950 | 25 mL |
STOP COCKS
| These polypropylene Stop Cocks are fitted with a PTFE plug & have serrated tubulations that accept from 6 mm to 10 mm tubing. These Stop Cocks are absolutely leakproof and are available in two different options i.e. 2 way & 3 way. |
|
| Material: Polypropylene / PTFE | |
| Cat. No. | Particulars |
| 5014050/1 | Stop cock 2 way |
| 5014050/2 | Stop cock 3 way |
STORAGE BOXES
| These Storage Boxes, made of polypropylene, prove to be an excellent option for storage of different powdered reagents & other material in the laboratory; Square shape of these boxes help in saving shelf space. Available in three different sizes, these boxes have polypropylene caps, are autoclavable, provide good chemical resistance & heavy duty service. |
|
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 5013650/1 | 250 mL |
| 5013650/2 | 500 mL |
| 5013650/3 | 1000 mL |
SYPHON, SELF PRIMING
| These siphons are self-priming. Container may be emptied inserting the open end of the tube in the liquid and pumping the bulb with stopcock closed. As soon as the liquid enters the bulb, the flow is automatically regulated. No further pumping is needed and the stopcock may be used to dispense whenever required. Available in pipe diameter | |
| Material: LDPE | |
| Cat. No. | Capacity mL |
| 2066300/1 |
60 mm |
| 2066300/2 | 12.5 mm |
TEST TUBE BASKET
| Made of polypropylene, the rectangular baskets are autoclavable, unbreakable, non-corrosive, and are ideal for rinsing and draining glassware. Also useful for easy handling and compact storage of test tubes and culture tubes during sterilization or incubation. Sizes available are |
|
| Material: Light Polypropylene | |
| Cat. No. | Particulars |
| 2072440/1 |
140 x 120 x 110 mm |
| 2072440/2 | 160 x 160 x 160 mm |
TEST TUBE CAP
| This transparent polypropylene cap for Test Tubes proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fitting on the tube while the outer grooves would hold identification labels. The built in seal ring would set in the tube making the combination a leakproof one. | |
| Material: Polypropylene | |
| Cat. No. | Particulars |
| 5014150 | Cap for Test Tube ø 25 mm |
