Products
Categories
Laboratory Plasticware
CONNECTORS
Moulded in Polypropylene, these connectors are basically pipe-like structures in T & Y shapes with ringed edges. These are used for connecting tubes to each other. The ringed edges prevent leakage & lippage.
Type : T-Connectors, Y-Connectors
DESICCATOR (PLAIN)
Plain desiccators are physically the same as Vacuum Desiccator. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight.
Sizes : 150mm, 200mm, 250mm
4 Places Crucible Support
Description: Dim: 135mm long x 135mm widex 60mm high |
|||
| Item no. | |||
| TT100-04 | |||
6 Places Crucible Support
Description: Dim: 125mm long x 90mm wide x 50mm high |
|||
| Item no. | |||
| TT100-06 | |||
A Shape Retort Stamd Base
Description: Cast iron, finishedin blue paint with hole tapped M10 x 1.5mm and rubber feet. |
|||
| Item no. | Side length | Rod | |
| AA420-150 | 150mm | 600 x 10mm | |
| AA420-151 | 200mm | 700 x 10mm | |
Alloy test tube and thermometer holder
| Description: | |
| Chrome plated alloy,with spring loaded jaws.for tube 0-25mm. | |
| Item No | Model |
| FD100-25 | chromed |
| TH810-20 | plastic coated |
Angel Adjustable Four Clamp
| Description: | |
| Alloy with cork lined jaws and hinge joint of 180-degree rotation angle.for article 0-80mm. | |
| Item No | Model |
| SJ280-10 | plastic coated |
| SJ280-11 | chrome |
ASPIRATOR BOTTLES
Aspirator Bottles are made of Polypropylrnr and are therefore much lighter than glass. These are autoclavable.
Cap. 5 Lit., 10Lit., 20Lit.
ATOMIC MODEL SET
These sets consists of moulded balls of different colours and sizes along with connecting lugs of different sizes. These sets are very helpful in modelling different organic & Inorganic compounds.
Senior Set : This set consists of 150 lugs & 370 balls of prescribed colours and sizes packed in a moulded box having seperate space for every particulars colour & size of ball.
Junior Set : This set consists of 30 connecting lugs & 75 balls of different colours & sizes.
Autoclave Basket
Description: Made of AISI304 stainless steel .3mm dia. Perforation. |
|||
| Item no. | Size | ||
| AB100-10 | 210mm dia.X 150mm high | ||
| AB100-20 | 220mm dia.X 240mm high | ||
| AB100-30 | 280mm dia.X 200mm high | ||
| AB100-40 | 380mm dia.X 280mm high | ||
| AA100-50 | 480mm dia.X 220mm high | ||
Ball Type Bosshead
| Description: | |
| Chrome plated alloy,suitiable for multilevel and three dimension constructions. | |
| Item No | For Rod Dia |
| CB270-13 | 7-13mm |
| CB270-25 | 15-25mm |
Beaker PFA
| Description: | ||
| These beakers have extra ordinary chemical resistance & are ideal for high purity applications & can be used with strong oxidizing agents,acids,hydrocarbonsn & Ketones Temperature. | ||
| Material:TPX Autoclauvable | ||
| Code | Capacity(ml) | Packing |
| 422000 | 50 | 12 |
| 422010 | 100 | 12 |
| 422020 | 250 | 12 |
| 422030 | 500 | 6 |
| 422040 | 1000 | 4 |
| 422050 | 2000 | 4 |
| 422060 | 5000 | 2 |
| 422070 | 10000 | 1 |
Beaker PP
| Material:PP Autoclauvable | ||
| Code | Capacity(ml) | Packing |
| 421010 | 50 | 12 |
| 421020 | 100 | 12 |
| 421040 | 250 | 12 |
| 421050 | 500 | 6 |
| 421060 | 1000 | 4 |
| 421070 | 2000 | 4 |
| 421080 | 5000 | 2 |
| 421090 | 10000 | 1 |
Beaker Tong
| Description: | |
| For beakers,flat hinge.overall length 275mm. | |
| Item No | Model |
| CJ205-30 | PVC coated |
| TB600-10 | Rubber covered |
Beaker Tong
| Description: | |
| Made of AISI304,fiberglass sleeve for high temperature project | |
| Item No | Length |
| TB500-10 | 250mm |
| TB500-20 | 280mm |
Beaker TPH
| Material:TPX Autoclauvable | ||
| Code | Capacity(ml) | Packing |
| 422000 | 50 | 12 |
| 422010 | 100 | 12 |
| 422020 | 250 | 12 |
| 422030 | 500 | 6 |
| 422040 | 1000 | 4 |
| 422050 | 2000 | 4 |
| 422060 | 5000 | 2 |
| 422070 | 10000 | 1 |
Beaker(Plastic)
| Item no. | SPEC. | Maertial |
| BP01-01 | 250ml | PP |
| BP01-02 | 500ml | PP |
BEAKERS
Beakers, moulded in Polypropylene, have excellent clarity and very good chemical resistance. These autoclavable beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient becuaseof its tapered spout.
Cap. 50ml, 100ml, 250ml, 500ml, 1000ml, 2000ml
BEAKERS
Beakers moulede in polypropylene have excillent clarity and very good chemical resistance. these autoclable beakers have prominently raised graduations on the outer surface. pouring a solution becomes very convenient because of its tapered spout.
particulars:50ml,100ml,250ml,500ml,1000ml.
Boseshead
| Description: |
| High-sturdy.One end open :23mm,the other end :38mm. |
| Item No: CB200-09 |
Bosshead
| Description: | |
| Perfect for mixer use,highstrength and sturdy. | |
| Item No | Model |
| CB200-08 | 19mm |
Bosshead
| Description: |
| Die-cast alloy with nikel plated T screw head.For rods up to 16mm diameter. |
| Item No: CB200-12 |
Bosshead
| Description: |
| Chrome plated finish,plastic headed screws. For rods up to 15mm dimameter. |
| Item No: CB200-15 |
Bosshead
| Item No | Model | For Rods Dia. |
| CB203-13 | BLACK | 13mm |
| CB203-16 | BLACK | 16mm |
| CB203-21 | BLACK | 21mm |
| CB203-25 | BLACK | 25mm |
| CB201-13 | CHROME PLATED | 13mm |
| CB201-16 | CHROME PLATED | 16mm |
| CB201-21 | CHROME PLATED | 21mm |
| CB201-25 | CHROME PLATED | 25mm |
| CB202-13 | WHITE | 13mm |
| CB202-16 | WHITE | 16mm |
| CB202-21 | WHITE | 21mm |
| CB202-25 | WHITE | 25mm |
Brush
| Item no. | Uesd For | Model |
| BST01-01 | test tube | small |
| BST01-02 | test tube | medium |
| BST01-03 | test tube | big |
| BSR01-01 | reagent bottle | small |
| BSR01-02 | reagent bottle | medium |
| BSR01-03 | reagent bottle | big |
| BSF01-01 | conical flask | small |
| BSF01-02 | conical flask | medium |
| BSF01-03 | conical flask | big |
| BSV01-01 | volumetric flask | small |
| BSV01-02 | volumetric flask | medium |
| BSV01-03 | volumetric flask | big |
| BSF01-01 | separatory funnel | small |
| BSF01-02 | separatory funnel | medium |
| BSF01-03 | separatory funnel | big |
| BSB01-01 | burete | small |
| BSB01-01 | burete | medium |
| BSB01-01 | burete | big |
BUCHNER FUNNEL
Moulded in Polypropylene, these two piece funnels are light weight, easy to clean & autoclavable. The top portion can be snap fitted with the lower one forming a vacuum seal which does not require greasing. The base of the top portion has a perforated filter plate.
Size : 70mm, 110mm
Bunsen Burner
Description: With threaded needle valve,air regulator and alumiunm mixing tubes for thorough air/gas mixing,nickel plated,die-cast zinc alloy base. |
|||
| Item no. | Gas type | ||
| BY110-10 | natural gas | ||
| BY110-20 | liquid propane gas | ||
| BY110-30 | Artificial gas | ||
BURETTE
This burette has a transparent acrylic body and a leakproof stopcock fitted with a self lubricating PTFE plug. Each burette is inspanidually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute mineral acids & bases except Hydroflouric Acid & Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used upto 5% wt/wt of acids or 30% bases.
Cap. 25ml, 50ml
.jpg)
Burette Clamp(Alloy,Ni/Cr plated)
| Description: | ||
Self-closing jaws clamp the burettes in rigid ,upright position without obscuring graduations.Die-cast ,high strength alloy. |
||
| Item No. | Model | |
| CB 170-30 | Double | |
| CB 170-31 | Single | |
.jpg)
Burette Clamp(plastic)
| Description: | |
| Spring loaded self-closing jaws ,without obscuring graduations. Central bosshead for rods up to 14mm diameter. | |
| Item No. | Model |
| CB180-10 | Double |
| CB180-20 | Single |
Butane Gas Bottle Burner
Description: Tube dia.:14mm , Direct working pressure rate output 0.75 at 1 bar. |
|||
| Item no.: BY160-10 | |||
CENTRIFUGE TUBE CONICAL BOTTOM
CENTRIFUGE TUBE ROUND BOTTOM
Ceramic Plates
Description: Iron wire and square shape.Ceramic centers contains no asbestors. |
|||
| Item no | Model | Material | |
| CP900-100 | 100x100 | Open mesh(AISI304) | |
| CP900-120 | 120x120 | Open mesh(AISI305) | |
| CP900-125 | 125x125 | Open mesh(AISI306) | |
| CP900-140 | 140x140 | Open mesh(AISI307) | |
| CP900-150 | 150x150 | Open mesh(AISI308) | |
| CP900-160 | 160x160 | Open mesh(AISI309) | |
| CP900-180 | 180x180 | Open mesh(AISI310) | |
| CP900-200 | 200x200 | Open mesh(AISI311) | |
| CP900-250 | 250x250 | Open mesh(AISI312) | |
| CP850-100 | 100x100 | With ceramic center | |
| CP850-120 | 120x120 | With ceramic center | |
| CP850-125 | 125x125 | With ceramic center | |
| CP850-140 | 140x140 | With ceramic center | |
| CP850-150 | 150x150 | With ceramic center | |
| CP850-160 | 160x160 | With ceramic center | |
| CP850-180 | 180x180 | With ceramic center | |
| CP850-200 | 200x200 | With ceramic center | |
| CP850-250 | 250x250 | With ceramic center | |
Chain Clamp
| Description: |
| With chain and spring ,made of AISI304 stainless steel.For dia .from 80mm to 150mm. |
| Item No: CC400-145 |
Circular Support Platforms With Bossheads
Description: Made of chromed bosshead and plastic coated platform. |
|||
| Item NO. | Size | ||
| HO400-80 | 80mm | ||
| HO400-150 | 150mm | ||
Close Retort Ring With Bosshead
Description: 3pcs/set |
|||
| Item no.: AA300-100 | |||
| Other size available | |||
Close Ring Retort Support
Description: Made of Ni/Cr plated steel |
|||
| Item no. | Ring dia. | length | |
| HO310-60 | 60mm | 180mm | |
| HO310-80 | 80mm | 195mm | |
| HO310-100 | 100mm | 200mm | |
| HO310-120 | 120mm | 215mm | |
| HO310-140 | 140mm | 225mm | |
| Other size available | |||
CONICAL FLASK
Made of Polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the flask contamination free and makes the flask leakproof.
Cap. : 100ml , 250ml, 500ml
Conical Flask PC
| Description: | ||
| Break resistant, autoclavable, transparent polycarbonate flask have excellent mechanical strength. | ||
| Material:PC Autoclauvable | ||
| Code | Capacity(ml) | Packing |
| 441150 | 250 | 6 |
Conical Flask with Screw Cap
| Description: | ||
| Break resistant, autoclavable, transparent polycarbonate flask have excellent mechanical strength & having added advantage of polyproppylene screw cap used for preparation & storage of culture media. | ||
| Material:PC Autoclauvable | ||
| Code | Capacity(ml) | Packing |
| 441160 | 250 | 6 |
Conical Head clip (stainless steel)
| Description: | ||
| made of satainless steel,bright polished. | ||
| Item No. | Model | |
| CC200-10 | 10/19 | |
| CC200-12 | 12/21 | |
| CC200-14 | 14/23 | |
| CC200-19 | 19/26 | |
| CC200-24 | 24/29 | |
| CC200-29 | 29/32 | |
| CC200-45 | 45/40 | |
Conical Head Clips
| Description: | |||
| Made of platsic(POM) | |||
| Item No | Model | Color | |
| CC-10 | 10 | green | |
| CC-12 | 12 | purple | |
| CC-14 | 14 | yellow | |
| CC-19 | 19 | blue | |
| CC-24 | 24 | green | |
| CC-29 | 29 | red | |
Description: Nickel plated brass.Each set complete with push rod forcleaning. |
|||
| Item no. | Sets | O.d.(mm) | |
| CB580-03 | 3 | 5- 7.5 | |
| CB580-06 | 6 | 5-11.25 | |
| CB580-12 | 12 | 5-18.75 | |
| CB580-18 | 18 | 5-16.25 | |
| other sets avaliable. | |||
Cork Borer Sharpner
Description: Die-cast alloy.Suitable for all borers of CB580 seried. |
|||
| Item no. | |||
| CB590-10 | |||
Crocodile clips
| Description: | |||
| Plastic covered jaws. | |||
| Item no. | Colour | ||
| CR030-12 | red | ||
| CR030-14 | black | ||
Crucible Tongs
| Description: | ||
| Flat hinge.Bowed type.Dimension given is overall length. | ||
| Item No | Model | Total Length |
| TA500-150 | plated steel | 150mm |
| TA500-200 | plated steel | 200mm |
| TA500-220 | plated steel | 220mm |
| TA500-250 | plated steel | 250mm |
| TA500-300 | plated steel | 300mm |
| TA500-350 | plated steel | 350mm |
| TA500-400 | plated steel | 400mm |
| TA500-450 | plated steel | 450mm |
| TA500-500 | plated steel | 500mm |
| TA500-600 | plated steel | 600mm |
| TA600-150 | stainess steel | 150mm |
| TA600-200 | stainess steel | 200mm |
| TA600-220 | stainess steel | 220mm |
| TA600-250 | stainess steel | 250mm |
| TA600-300 | stainess steel | 300mm |
| TA600-350 | stainess steel | 350mm |
| TA600-400 | stainess steel | 400mm |
| TA600-450 | stainess steel | 450mm |
| TA600-500 | stainess steel | 500mm |
| TA600-600 | stainess steel | 600mm |
6262/9 & 6262/26, Idgah Road,
Cross Road Number 8, Interlabs Complex,
AMBALA CANTT-133001 Haryana (INDIA)
HELP desk 092549-04551
Email: vidyatechnoart@gmail.com