Products

Categories

Laboratory Plasticware

Porcelain Spatulas with Spoon End, Glazed

Porcelain Spatulas with Spoon End, Glazed

Item No. Length (mm)

C153

140
RACK FOR MICRO CENTRIFUGE TUBE

RACK FOR MICRO CENTRIFUGE TUBE

Moulded in polycarbonate this autoclavable rack is made for holding twenty four 1.5ml. micro centrifuge tubes. this rack has a unique stacking feature which prevents movement in any direction. the holes are numbered and lettered for easy identification.
RACK FOR PETRI DISHES

RACK FOR PETRI DISHES

This rack is a clear acrylic construction with white polycarbonate posts. it has a capacity to hold 60 petri dishes of 90 mm size. this rack is very useful during inoculation, incubation and storage. visibility from all sides enable the culture to be seen and checked during incubation.
RACK FOR SCINTILLATION VIAL

RACK FOR SCINTILLATION VIAL

These rack for scintillation vials, moulded in polypropylene, are autoclavable resistant. there is an inspanidual rack for both 8ml. and 20ml.vials. these rugged and stable racks can hold scintillation vails for convennient storage handling and sample preparations.
Rack for Scintillation Vial

Rack for Scintillation Vial

Polypropylene molded racks for Scintillation Vials are autoclavable and corrosion resistant. These rugged and stable racks can hold scintillation vials for convenient storage, handling and sample prepartion. Rack for 90 vials of 8ml capacity
Reagent Bottle (Plastic)

Reagent Bottle (Plastic)

Item no. SPEC. Matertial
RB01-01 250ml PP
RB01-02 500ml PP
REAGENT BOTTLES (NARROW MOUTH)

REAGENT BOTTLES (NARROW MOUTH)

These narrow mouth reagent bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polythylene bottles too have excellent strength and are unbreakable. The polypropylene cap has a built in seal ring to make these bottles leakproof.

Cap. : 60ml, 125ml, 250ml, 500ml, 1000ml

REAGENT BOTTLES (Wide Mouth)

REAGENT BOTTLES (Wide Mouth)

These wide mouth reagent bottles are available in Polypropylene as well as Polyethylene. The PP bottles as rigid, translucent and have excellent contact clarity. These bottles can be autoclaved.

Cap. : 60ml, 125ml, 250ml, 500ml, 1000ml

Rectangular Retort Stand Bases

Rectangular Retort Stand Bases

Description:

Cast iron,with hole tapped M10 x 1.5mm and rubber feet in the short side.

Item no. Model Size(mm)
A390-240 Blue paint 115 x 75
A390-250 Blue paint 160 x 100
A390-260 Blue paint 200 x 125
A390-270 Blue paint 250 x 160
A390-280 Blue paint 315 x 200
RETORT STAND

RETORT STAND

These non-corrosive, moulded Retort stands provide excellent replacement for the metal ones. Even the metallic rod has a polypropyelene covering making it non corrosive. The rod measuring 12.5mm x 750mm can be screwed in to the heavy base giving way to a perfectly stable retort stand.

Sizes :

225x150mm Side Hole

300x200mm Center Hole

300x200mm Side Hole

Retort Stand

Retort Stand

Description:

Made of cast iron , painted blue , complete with retort rod.

Item bo. Size(mm) rod length x dia.
AA330-140 200 x 140 600 x 10mm
AA330-180 300 x 180 700 x 10mm
Retort Stand Base

Retort Stand Base

Description:

Metal sheet base, complete with rod.

Item no. Material Base size Rod
AA380-175 Painted steel 175 x 100 450 x 9mm
AA380-225 Painted steel 225 x 125 500 x 10mm
AA380-230 Painted steel 230 x 130 600 x 10mm
AA380-250 Painted steel 250 x 150 600 x 10mm
AA380-300 Painted steel 300 x 150 700 x 12mm
AA400-175 Stainless steel 175 x 100 450 x 9mm
AA400-225 Stainless steel 225 x 125 500 x 10mm
AA400-230 Stainless steel 230 x 130 600 x 10mm
AA400-250 Stainless steel 250 x 150 600 x 10mm
AA400-300 Stainless steel 300 x 150 700 x 12mm
RIA VIAL

RIA VIAL

These Polypropylene/ Polystyrene tubes are generally used in RIA, Coagulation & Cateriology. The polypropylene tubes are clear and can withstand 3000 RCF during centrifugation while the transparent polystyrene tubes can withstand 1400 RCF. The PP tubes can accept common acids, alkalies, solvents at room temperature while the ps tubes can accept mild bases, weak acids but not organic solvents.

Particulars : 12 x 75mm/ PS, 12 x 75mm PP

RIA Vial

RIA Vial

Polypropylene or Polystryrene tubes that are generally used in RIA, coagulation and bacteriology. The polypropylene tubes are clear and can withstand 3000 RCF during centerfugation while the transparent polystyrene tubes can withstand 1400 RCF. The polypropylene tubes can accept common acids, alkalies and solvents at room temperature while the PS tubes can accept mild bases, weak acids but not organic solvents. 12x75mm
Round Jaws Universal Clamps

Round Jaws Universal Clamps

Item No. Model Size
FW150-30 Shank 30mm
FW150-50 Shank 50mm
SW150-30 Swivel 30mm
SW150-50 Swivel 50mm
SAMPLE CONTAINER (PRESS AND FIT TYPE)

SAMPLE CONTAINER (PRESS AND FIT TYPE)

Made of polypropylene these disposable containers are used for collecting samples of sputam or urine etc. graduated on the outer surface these containers have cap that work in a press and fit manner and make these containers leakproof.these disposable containers are E.T.O.sterilized.

particulars:50ml

SCINTILLATION VIAL

SCINTILLATION VIAL

these unbreakablevials moulded in polytethylene,are fitted with leak proof scerw caps. these vials can be used with standard counting equipment for liquid scintillation system and are excellent for low activity count.

Particulas:8ml,20ml.

SEPERATORY FUNNEL

SEPERATORY FUNNEL

Seperatory funnel is made of polypropylene giving it excillent contact clarity and strengt. this pear shape autoclable seperating funnel has a leakproof threaded screw cap. the polypropylene stopcock,fitted with self lubricateing PTFEplug is push fitted to the stem of the seperatory funnel.

particulars:100ml,250ml,500ml.

SEPERATORY FUNNEL HOLDER

SEPERATORY FUNNEL HOLDER

This non-corrosive seperatory funnel holder, moulded in Polypropylene, has a front opening which provides clear view of the solution and allows unobstructed placement of seperating funnel. Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8"
SIMPLE CELL POT

SIMPLE CELL POT

Simple cell pot as the name suggests, is used for making simple cells and voltmeters etc. moulded in polypropylene this pot has very good contact clarity and excillent chemical resistance. being in polypropylene this pot is much durable than the one used conventionnallty.
Single Burette Clamp(Alloy)

Single Burette Clamp(Alloy)

Description:

Almost the same as CB170-10,but for single burette usage.

Item No. : CB170-20
Single Burette Clamp(plastic)

Single Burette Clamp(plastic)

Description:

Made of plastic . same as CB160-10

Item No. Model
CB150-10 ABS
CB 150-12 PP
SLIDE BOX

SLIDE BOX

These slide boxes are durable, compact & provide utmost protection to 1" x 3" slides. Heavy walls will not warp, splinter or crack. Boxes are unaffected by humidity and are thoroughly insect proof. Base of the slide box has numbered index for easy slide identification.

Sizes : 25 Slides, 50 Slides, 100 Slides

SLIDE MAILER

SLIDE MAILER

Slide mailers present the best option to carry prepared slides from one place to another. Moulded in Polypropylene, these slide mailers are available in two sizes i.e. 2 slides and 5 slides.
Sodium Spoon

Sodium Spoon

Description:

Complete with brass basket and handle.Dia.25mm,total length:190mm

Item no.: SP500-10
SPATULA

SPATULA

Moulded in polypropylene spatula consist of a spoon on one side while the other end is a flat contruction with a knife edge.this edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers.

particulars:150mm,200mm.

Spatulas

Spatulas

Description:

Stainless steel AISI304.One end rounded and bend up,one end square.

Item no. length(mm)
SP110-100 100
SP110-120 120
SP110-125 125
SP110-140 140
SP110-150 150
SP110-160 160
SP110-180 180
SP110-200 200
SP110-220 220
SP110-230 230
Other size available
Sperical Joint Pinch Clamp

Sperical Joint Pinch Clamp

Description:
Spring closing action.Unique forked shaaped jaws provide uniform compression for safe,leak-free seals.screw locking device for maximum security.stainless steel bright polished finish for years of chemical resistance.
Item No Length
CS610-12 12
CS610-18 18
CS610-28 28
CS610-35 35
CS610-50 50
CS610-65 65
Spoon

Spoon

Description:

Brass and AISI304 stainless steel

Item no. Spoon dia. Material
CC100-10 21mm Cu
CC100-20 21mm S/S304
CC100-30 30mm Cu
CC100-40 30mm S/S304
Spot Plate, 12 Cavity

Spot Plate, 12 Cavity

These economical white plastic plates are suitable for most applications in which glass or procelain plates are used; however, they are not recommended for strong solvents such as acetone or xylene. Each plate measures 112 x 92mm. Supplied in a pack of 12. Spot Plate, 12 Depressions, Polystyrene, pack of 12.
Spring Tubing Clamps

Spring Tubing Clamps

Description:
Center hinged spring and acetal plastic,provide on/off flow control for flexible tubing.
Item No For Tubing Dia
TC300-08 0-8mm
TC300-12 0-10mm
Square Crucible Support

Square Crucible Support

Description:

Dim:205mm longx 130mm wide x 45mm high

Item no.
TT100-10
STIRRER

STIRRER

Made of polypropylene these stirrer are very useful for stirring different solution in the laboratory. these stirrer prove to be tough and long lasting.
STOP COCKS

STOP COCKS

These polypropylene stop cocks are fitted with a PTFE plug & have serrated tubulations that accept from 6mm to 10mm tubing. These stop cocks are ansolutely leakproof and are available in two different options i.e. 2 way & 3 way.
Stop Cocks

Stop Cocks

Polypropylene Stop Cocks are fitted with a PTFE plug and have serrated tabulations that accept 6mm to 100mm diameter tubing. These stop cocks are leak proof and are available in two types, i.e. 2-way and 3-way. Stop Cock 2-way
STORAGE BOXES

STORAGE BOXES

These storage boxes, made of polypropylene, prove to be an excellent option for storage of different powdered reagents and other materialin the laboratory. square shape of these boxes help in saving shelf space. available in two different sizes,these boxes have polypropylene caps are autoclable, provide good chemical resistance and heavy duty service.

particulars:500ml,1000ml.

Storage Boxes

Storage Boxes

Polypropylene and square in shape to help save shelf space. These boxes have polypropylene caps, are autoclavable and provide good chemical resistance and heavy duty service. 250ml
STORAGE VIAL

STORAGE VIAL

As the name suggest these vials are commonly used for storage of biological material human and animal cells at temperature as low as -190C.the cap is provided with a built in seal ring making the vial leakproof. the base of the vial has longitudonal grooves which give ita non- twisting character when placed in a vial rack.

Particulars: SV-10ml,SV-5ml.

Support Stand Kits

Support Stand Kits

A.700mm high  x  700mm long

Description:

made up of: 8rods 700mm long, 2rods 350mm long, 16 bosshead,4 foot supports,1 hex key.

Item no. Material
KS070-070 stainless steel rod
KA070-070 Aluminium rod
KT070-070 Steel rod
SV10-SV5

SV10-SV5

these polypropylene vials add to the existing range of polylab storage vials.available in5ml. and 10ml.capacities, these vials have polypropylene cap with built in seal ring making it aleakpropf vial. just like others storage vials are also used for the storageof biological material,animal and human cells etc.

Particulars:SV10ml,SV5ml.

Swivel Three Finger Clamp

Swivel Three Finger Clamp

Description:
Made of chrome-plated metal with 3 PVC coated prongs used for byretes and tubes.
Item No. Model Size
SJ170-20 Small 0-25mm
SJ170-21 Medium 0-50mm
SYPHON

SYPHON

These self priming Syphons can be used for pouring liquids from large containers to small ones without actually lifting them.

Cap. : 6mm.

Teclu Burner

Teclu Burner

Description:

With air regulatou and gas control needle walve.

Item no. Gas type Burner tube Height 
BY125-10 natural gas  13mm o.d 125mm
BY125-20 liquid propane gas 13mm o.d 125mm
BY125-30 artificial gas 13mm o.d 125mm
Test tube and thermometer swivel holder (alloy)

Test tube and thermometer swivel holder (alloy)

Description:
Chrome plated alloy,with bosshead and spring loaded jaws.for tube 0-25mm.
Item No Model
SD100-25 chromed
TH810-21 plastic coated
TEST TUBE BASKETS

TEST TUBE BASKETS

Test tube baskets are made of polypropylene. these autoclavable ,unbreakable and non corrpsive baskets are ideal for rinsing and draining glassware. these are also useful for syorage of test tubes or culture tubes during sterilization or incubation.
TEST TUBE CAP

TEST TUBE CAP

This transparent polypropylene cap for test tube prove to be an excellent protection to the contents to the tubes. the grooves inside the cap tighten on the tube while the outer grooves would hold identification labels. the built in seal ring would set in the tube making the combination a leakproof one.
Test Tube Holder (metal wire)

Test Tube Holder (metal wire)

Description:
Spring steel.Hold tubes up to 30mm diameter.
Item No Model REMARK
TH800-10 without finger grip plated steel
TH800-20 with finger grip plated steel
TH801-10 without finger grip AISI304
TH801-20 with finger grip AISI304
Test Tube Holder(Hard Wood)

Test Tube Holder(Hard Wood)

Description:
With steel spring for tubes to 20mm
Item No: TH810-10
Test Tube Rach(Z type)

Test Tube Rach(Z type)

<
Test Tube Rack

Test Tube Rack

Description:

made of aluninium.with hole arranged in 5 rows *10 holes,and alphanumeric engraved for cross reference,guide from 1 to 10 and A to e.

Item no. Holes dia. Rows
ST450-012 12.2 5*10
ST450-014 14.5 5*10
ST450-017 17.5 5*10
Item no. Model Tubes Dia.mm
ST400-10 PVC coated 6*4 16
ST400-20 PVC coated 6*5 25
ST400-30 AISI304 6*6 16
ST400-40 AISI305 6*7 25