Products
Categories
Laboratory Plasticware
Crucible Tongs
| Description: | ||
| Flat hinge.Straight type.Dimension given is overall length. | ||
| Item No | Model | Total Length |
| TA700-150 | plated steel | 150mm |
| TA700-200 | plated steel | 200mm |
| TA700-220 | plated steel | 220mm |
| TA700-250 | plated steel | 250mm |
| TA700-300 | plated steel | 300mm |
| TA700-350 | plated steel | 350mm |
| TA800-150 | stainess steel | 150mm |
| TA800-200 | stainess steel | 200mm |
| TA800-220 | stainess steel | 220mm |
| TA800-250 | stainess steel | 250mm |
| TA800-300 | stainess steel | 300mm |
| TA800-350 | stainess steel | 350mm |
CRYO BOX
CRYO BOX
CRYO CODERS
These coders available in different colours can easily fit in to the cap of croy vials for colour identification of different samples.
Particulars:croy coders.
CRYO VIAL
Cryo vials are normally used for storage of biological material, human and animal cell at temperature as low as-190C. these sterial tubes are provided with white, prominent graduations and a long marking area for sample identification. the cap of these vials is providedwith seal ring inside to make it completely leakproof. the longitudonal grooves in the base give a non -twisting feature to these vials when placed in a cryo rack.
Particulars:1.0ml,1.8ml,4.5ml.
CRYSTAL MODEL SET
Deflgration Spoon
Description: Stainless steel with flange cap. |
|||
| Item no. | Length | Flange dia. | |
| DS200-050 | 200 | 60 | |
| DS200-060 | 300 | 90 | |
| DS200-090 | 400 | 90 | |
DESICCATOR (VACCUM)
Desiccators are made of Polypropyelene and Polycarbonate. These autoclavable vacuum desiccators can hold vacuum upto 740mm of Hg for 24 hrs. without any greasing.
The top dome, moulded in rigid and transparent POlycarbonate, gives a crystal clear view of the desiccant placed inside. The knurled knob on the top provides easy handling of the dome . The lower part is made of Polypropylene. An internal groove is provided on the flange to hold a silicon rubber O-ring.
The Polypropylene stopcock is fitted with a seld lubricating PTFE plug. This plug works three way i.e. vaccum creation, shutting off and vaccum releasing.
Each desiccator is provided with a thick perforated Polypropyelene disc with a big hole in the centre for easy lifting. The tiny holes in the disc provide air troughs & support to the dishes. However porcelain discs are advisable in case of incandescent crucibles.
Desiccator, Non Vacuum
Desiccator, Vacuum
Dish Tong (forceps)
| Description: | |
| Made of AISI304,three finger type for stable operation. | |
| Item No | Length |
| TB400-10 | 240mm |
| TB400-20 | 300mm |
Double Burette Clamp
| Description: | |
For two burettes from micro to 100ml size and self closing jaws without obscuring graduations. Die-cast,high strength alloy and plastic coated. |
|
| Item No. : CB170-10 | |
Double Burette Clamp(plastic)
| Description: | ||
Spring loaded clear view for graduations. With rubber grips & central bosshead . For rods from 11mm to 14mm in diameter. |
||
| Item No. | Model | |
| CB160-10 | ABS | |
| CB160-12 | PP | |
Double Clamp For Rod
| Description: | |
| Ni/Cr plated,for fixing perpendicular structures. | |
| Item No | For Rod Dia |
| CB280-10 | 10mm |
| CB280-12 | 12mm |
| CB280-14 | 14mm |
| CB280-16 | 16mm |
.jpg)
Double Clamps(medium+small)
| Description: |
| One jaw grip object up to 25mm,rotates 360 degrees . |
| Item No:TT600-10 |
Double Roating Clamp
| Description: | |
| Chrome plated alloy,360 degree adjustable | |
| Item No | Model (opening) |
| BB180-16 | 16mm |
| BB180-19 | 21mm |
Draining Rack
Description: Made of plastic coated steel, Wire tips are PVC Covered. |
|||
| Item no. | Position | Size(High X Wide | |
| DR650-50 | 55 | 650 x 360 | |
| DR650-48 | 48 | 500 x 400 | |
| DR650-32 | 32 | 300 x 400 | |
Dropping Bottles
| Material: LDPE | ||
| Code | Capacity(ml) | Packing |
| 620010 | 60 | 12 |
| 620020 | 120 | 12 |
Erlenmeyer Flasks, PP
Filling/Venting closure
| Description: | ||
| Autoclauvable clousre for aseptic transfer of media,biological reagents,pure water & chemical to & from heavy duty vaccum bottle & carboys.Size:53mm can be used with Heavy Duty Vaccum bottle 2 lts. & 83mm can be used with 10lts & 20 lts. | ||
| Material: PP/Silicone Autoclauvable | ||
| Code | Capacity(ml) | Packing |
| 583216 | 53 | 1 |
| 583217 | 83 | 1 |
FISHER CLAMP
These clamps are moulded in Polypropylene making it completely corrosion proof. The spring loaded jack in the middle provides a vice like grip to the burette and prevents it from slipping.
Size : Single and Double
Flask Clip
| Item No | Model |
| CJ204-28 | alloy |
| CJ204-30 | sheet metal |
FLASK STAND
FLOAT RACK
This float rack moulded in polypropylene is quite compack ,autoclavable and can hold 16 micro centrifuge tube for incubation in water baths. easy to load,these are essential in microbiology and immunology labs. the surface of the rack has raisd alpha-numeric index for easy identification and has a central rod handle for convenient lifting.
Particulars:16MCTS of1.5mkl.
Forceps(4 pcs/set)
| Item no. | Model | ||
| 1. FC100-10 | with stirong tips for general use | ||
| 2. FC100-30 | with curved tips | ||
| 3. FC100-20 | with flat and wire tips for stamps,wafers,cover-glasses and medicine |
||
| 4. FC100-40 | fine,permanent sharp,reversible action | ||
(.jpg)
Four Finger Clamp(shank)
| Description: | ||
Die-cast alloy,Ni/Cr plated finish ,with cork lined interlocking jaws. Accepts articles up to 80mm in diameter. |
||
| Item No. | Model | |
| CB190-10 | Chromed | |
| CB 190-11 | Plastic coated | |
.jpg)
Four Finger Clamp(Shank2)
| Description: | ||
Die-cast alloy,Ni/Cr plated finish ,with cork lined interlocking jaws. Accepts articles up to 80mm in diameter. |
||
| Item No. | Model | |
| CB200-10 | Chromed | |
| CB200-11 | Plastic coated | |
Four Finger Swivel Clamps
| Description: | |||
Chrome plated ,zinc-alloy,for articles up to 80 mm in diameter .And rotate 360 degrees. Locks in any position. |
|||
| Item No. | Size | Model | |
| SW300-80 | 0-80mm | UK type | |
| SW300-90 | 0-80mm | eu type | |
FUNNEL HOLDER
Funnel Holder
| Item no. | Model |
| BB180-02 | 2 support |
| BB180-04 | 4 support |
FUNNELS - LONG STEM
G Clamp
| Description: | |||
| cast iron,with ball end for surface protection,painted black and blue. | |||
| Item no. | Range | Colour | |
| GC100-10 | 0-25mm(1〞) | black | |
| GC100-20 | 0-50mm(2〞) | black | |
| GC100-30 | 0-75mm(3〞) | black | |
| GC100-40 | 0-100mm(4〞) | black | |
Glass Tube Cutter
Description: For tubes dia. Up to 30mm |
|||
| Item no. | Size | ||
| CB600-30 | 30mm | ||
| CB600-50 | 50mm | ||
H Shape Support Stand Base
Description: Three vertical rods and two horizontal rods,six bosshead |
|||
| Item no | Base size | Rod length | dia of rod |
| AA100-010 | 500x250 | 800mm | 10mm |
| AA200-010 | 400x200 | 700mm | 10mm |
| AA100-012 | 500x250 | 800mm | 12mm |
| AA200-012 | 400x200 | 700mm | 12mm |
Hand Protectors
Description: Silicone rubber,with grip for safe handling.Withstand -50to +250°C temperature |
|||
| Item no. | Model | Material | |
| HP190-100 | big | silicone rubber | |
| HP190-90 | big | Natural rubber | |
| HP190-80 | small | silicone rubber | |
| HP190-70 | small | Natural rubber | |
High Temperature Burners
Description: With grid tops, provideuniform heat with no back flashes. One piece nickel plated venturi tube to thoroughly mix air and gas. |
|||
| Item no. | Gas type | ||
| BY150-10 | Natural | ||
| BY150-20 | Liquid propane | ||
| BY150-30 | Artificial | ||
Hoffman Side Hinged Clip
| Description: |
| Zinc-alloy Nickel plated with controlthumb screw. |
| Item No: TH100-08 |
Hoffman's Tubing Clip
| Description: | |||
| Hoffman type,brass made,bottom hinged and nickel plated.Allow variable flow control. | |||
| Item No. | Max. Opening | ||
| TH200-12 | 12mm | ||
| TH200-17 | 17mm | ||
| TH200-20 | 20mm | ||
| TH200-25 | 25mm | ||
| TH200-30 | 30mm | ||
| TH200-40 | 40mm | ||
Horizon Pipette Rack
Description: Made of PP,support 12 straight or small bulb popette over 200mm long. Complete with two end pieces and three connecting rods for easily assembly. |
|||
| Item no.: TT650-10 | |||
IMMUNOLOGY PLATES
Immunology Plates
KIPPS APPARATUS
Kipps Apparatus ,ade of Polyethylene has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute acid can be poured which react with a metal sulphide in the base of the apparatus. H S gas then envolved collects in the middle dome from where it can be released through a leakproof stopcock fitted with a self lubricating PTFE plug. The base is provided with a residual outlet fitted with a cap for easy cleaning.
Cap. : 250ml, 500ml, 1000ml
Kolle Handles
Description: Meatal handle with loop end of Ni/Cr. Completed eith 2 loop end . |
|||
| Item no. | length(mm) | Model | |
| KH200-10 | 200 | Short size | |
| KH290-10 | 290 | Long size | |
| HT100-10 | 50 | Loop en (loop dia.3mm) | |
| HT100-20 | 50 | Sharp.end | |
| HT100-30 | 50 | Blade end | |
Laboratory Forceps
| Description: | |||
| stainless steel | |||
| Item no. | Model | ||
| A.FC210-125 | straight forceps round tips,total length:15mm | ||
| B.FC211-120 | sorung straight force with fine tips,total length:120mm | ||
| C.FC212-120 | flat tips total length:120mm | ||
| D.FC213-126 | fine tips,total length:126mm | ||
| E.FC214-102 | straiht forceps round tips,total length:102mm | ||
Laboratory Jacks
Description: Aluminium plates providing a rigid support platform.The scissor action movement is activated by a large control knob , LJ450 have a tapped hole with locking nut in the top plate which accepts an M10 threaded retort rod. |
|||
| Item no. | Size(mm) | Max height(mm) | Max static load(kg) |
| LJ450-100 | 100 x 100 | 140 | 30 |
| LJ450-150 | 150 x 150 | 280 | 60 |
| LJ450-200 | 200 x 200 | 290 | 60 |
| LJ450-250 | 250 x 250 | 380 | 60 |
Laboratory Jacks
Description: Scissor action movement. Controlled by a large khnob. Steel Top and bottom plates. |
|||
| Stainless steel | Size | Material | |
| LJ480-150 | 150 x 150 | stainless steel | |
| LJ480-200 | 200 x 200 | stainless steel | |
| LJ460-150 | 150 x 150 | Plated steel | |
| LJ460-200 | 200 x 200 | Plated steel | |
| LJ500-150 | 150 x 150 | Plastic coated | |
| LJ500-200 | 200 x 200 | Plastic coated | |
LABORATORY TRAY
Needless to say, laboratory tray moulded in polypropylene is a multipurpose tray that can be used for sterilizing ,drying glassware, porcelainware and other laboratory intruments. these steam autoclable trays have tapered walls which prove good for nesting.
Particulars:450x350x75mm.
LECLANCHE CELL POT
MAGENTA BOX
